BLE_firmware_V1.9
Instructions
This is DFRobot BLE firmware V1.9 respository.
The following devices are supported with these firmware, please download the newest one according to your device.:
1 Bluno
2 BLE Link
3 BLE MEGA1280
4 BLE MEGA2560
5 USB BLE-LINK (BLE-Link Firmware)
6 Romeo BLE (Bluno Firmware)
7 Romeo BLE mini (Bluno Firmware)
8 Bluno M3 V2.1
9 Bluno M3 V2.2
10 Bluno Link (BLE-Link Firmware for connecting with Intel Curie, Genuino/Arduino 101)
11 Bluno M0 br>
Website: www.dfrobot.com/www.dfrobot.com.cn
Update: 2017/10/14 Add Bluno M0 firemware
Update: 2017/7/14 Add BLE-Link Firmware for connecting with Intel Curie
Update: 2016/1/11 Open V1.9.6 firmware
Update: 2015/11/20 Add a new device: Bluno M3 V2.1
Update: 2016/12/7 Add a new device: Bluno M3 V2.2 (Note: Not compatible with V2.1 version)
Update: 2016/1/11
V1.9.6
- Exchange TX and RX indicator LED, it is same to Arduino UNO now.
- This Firmware is an official update version based on V1.9.3. Please check the difference with V1.94. And let us which one do you like.
V1.9.4
Note: this is a BLE firmware fork version. It adds some feastures which doesn't exist before. Let us know which one do you like.
1 Support uppercase and lowercase input command
2 Support help mode: Try the command "AT+HELP=?", it will be a surprise
3 Power indicator: RX led will flash, when it first get power
V1.9.3
Change the default BLE device name
2014/12/30 fix messy code bug
V1.9.2
Add a version name in AT name.
e.g. For now, when you input "AT+VERSION=?" in AT mode. it will show V1.92
2014/12/30 update: a messy code bug on Android and IOS
V1.9.1
Fix V1.9 setting error: Name, Tx power .etc
V1.9:
Recompile BLE firmware with official protocol stack:BLE-CC254x-1.4.0
Fix BLE name error with IOS device.
Fix wireless programming passward from mobile device.