breunigs / Bravia Auth And Remote

Setup

You need to set your TV to use a pre-shared key.

1. Navigate to: [Settings] → [Network] → [Home Network Setup] → [IP Control]
2. Set [Authentication] to [Normal and Pre-Shared Key]
3. There should be a new menu entry [Pre-Shared Key]. Set it to 0000. If you choose anything else, you need to change the PSK in the send_command.sh script.

Usage

1. Run print_ircc_codes.sh TV_IP_HERE to get an overview of the commands possible.
2. Run send_command.sh TV_IP_HERE ONE_COMMAND_HERE. A command looks like AAAAAQAAAAEAAABgAw==.
3. The TV will execute the command and immediately return. If you want to navigate through menus, you'll have to manually sleep until the TV has finished the command/animation.

See example_goto_media_player.sh on how to build your automations.

Have fun!

More detailed explanation

The original blog post describes how to figure this out in general: https://blog.yrden.de/2014/11/14/remote-control-bravia-tvs-with-authentication.html

StefanPuntNL figured out how to use it with a Pre-Shared-Key, which is much simpler: https://www.domoticz.com/forum/viewtopic.php?t=8301