Dell Optiplex 3060 MFF Hackintosh

EFI for Dell Optiplex 3060 MFF with OpenCore bootloader

Computer Spec:

Peripherals & Bench

What works and What doesn't or WIP:

• Intel UHD 630 iGPU HDMI/DP Output
• Intel UHD 630 iGPU - H264 & HEVC
• ALC255 Internal Speakers
• ALC255 Native Combojack headphones
• ALC255 Combojack microphone
• ALC255 HDMI/DP Audio Output
• ALC255 jack LINE-IN
• All USB Ports
• SpeedStep / Sleep / Wake
• HID Key PWRB & SLPB
• Wi-Fi and Bluetooth BCM94352Z (DW1560) Module
• CONTROLLER NVME PciE Gen3x4
• CONTROLLER SATA III
• All Sensors (CPU, NVME, SATA, FAN)
• Realtek RTL8168 LAN
• NVRAM
• Windows 11 boot from OpenCore

Special Config:

• Usb port mapping performed

Post Install:

Open terminal and run install.sh from PostInsall/ComboJackAlc255. After reboot insert jack and appears this image

See ioreg for more clarification

MacOS bootable USB creation:

• Read the Dortania guide for creating your USB from Windows or macOS
• Guide Dortania - USB creation

Bios settings

Enable :

• SATA Operation : AHCI
• Fastboot : Thorough
• Integrated NIC : Enable

Disable :

• Secure Boot
• Absolute
• Intel SGX
• Enable UEFI Network Stack
• cfg lock and DVMT and unlock NVME gen3: DO AT YOUR OWN RISK!!! It may brick your laptop.

• Bios Extract to txt

Create a usb in FAT with MBR map and put ru.efi in it then go to the bios, and create an entry with the path of the usb and setting the ru.efi file and the name of your choice startup and then send and finally click apply.

Restart and press f12 among the entries you will have the last created, click any key, then click alt + ì a menu will appear and scroll to CpuSetup and click enter, in the new screen go with the arrows on the value 05BE and change it from 01 to 00 and click enter and then ctrl + w to save and then alt + q to exit. proceed to check if your CFG LOCK is unlocked.

For the DVMT pre all values you have to go to the Setup menu and enter and look for 08DC and set it from 01 to 02 (value 02 is for 64MB pre all)and then move then save with ctrl + w and to exit alt + q and you will have the suitable DVMT values to the igpu.

For unlock the NVME from GEN2 to GEN3 you have to go to the Setup menu and enter and look the photo and set the value from 02 to 03 and then move then save with ctrl + w and to exit alt + q and you will have the NVME Work to GEN3.

Credits

• Apple for macOS;
• Acidanthera for OpenCore and all the lovely hackintosh work.
• Dortania For great and detailed guides.
• Hackintoshlifeit Support group for installation and post installation.