dnsredir

Name

dnsredir - yet another seems better forward/proxy plugin for CoreDNS, mainly focused on speed and reliable.

dnsredir plugin works just like the forward plugin which re-uses already opened sockets to the upstreams. Currently, it supports UDP, TCP, DNS-over-TLS, and DNS-over-HTTPS and uses in continuous health checking.

Like the proxy plugin, it also supports multiple backends, which each upstream also supports multiple TLS server names. Load balancing features including multiple policies, health checks and failovers.

The health check works by sending . IN NS to upstream host. Any response that is not a network error(for example, REFUSED, SERVFAIL, etc.) is taken as a healthy upstream.

When all upstream hosts are down this plugin can opt fallback to randomly selecting an upstream host and sending the requests to it as last resort.

Syntax

The phrase redirect and forward can be used interchangeably, unless explicitly stated otherwise.

In its most basic form, a simple DNS redirecter uses the following syntax:

dnsredir FROM... {
    to TO...
}

FROM... is the file list which contains base domain to match for the request to be redirected. URL can also be used, currently only HTTPS is supported(due to security reasons).

.(i.e. root zone) can be used solely to match all incoming requests as a fallback.

Two kind of formats are supported currently:
- DOMAIN, which the whole line is the domain name.
- server=/DOMAIN/..., which is the format of dnsmasq config file, note that only the DOMAIN will be honored, other fields will be simply discarded.
Text after # character will be treated as comment.

Unparsable lines(including whitespace-only line) are therefore just ignored.
to TO... are the destination endpoints to redirected to. This is a mandatory option.

The to syntax allows you to specify a protocol, a port, etc:

[dns://]IP[:PORT] use protocol specified in incoming DNS requests, it may UDP or TCP.

[udp://]IP:[:PORT] use UDP protocol for DNS query, even if request comes in TCP.

[tcp://]IP:[:PORT] use TCP protocol for DNS query, even if request comes in UDP.

tls://IP[:PORT][@TLS_SERVER_NAME] for DNS over TLS, if you combine : and @, @ must come last. Be aware of some DoT servers require TLS server name as a mandatory option.

json-doh://URL use JSON DNS over HTTPS for DNS query.

ietf-doh://URL use IETF(RFC 8484) DNS over HTTPS for DNS query.

doh://URL randomly choose JSON or IETF DNS over HTTPS for DNS query, make sure the upstream host support both of type.

Example:
```
dns://1.1.1.1
8.8.8.8
tcp://9.9.9.9
udp://2606:4700:4700::1111

tls://[email protected]
tls://8.8.8.8
tls://dns.quad9.net

doh://cloudflare-dns.com/dns-query
json-doh://1.1.1.1/dns-query
json-doh://dns.google/resolve
ietf-doh://dns.quad9.net/dns-query
```

An expanded syntax can be utilized to unleash of the power of dnsredir plugin:

dnsredir FROM... {
    path_reload DURATION
    url_reload DURATION [read_timeout]

    [INLINE]
    except IGNORED_NAME...

    spray
    policy random|round_robin|sequential
    health_check DURATION [no_rec]
    max_fails INTEGER

    to TO...
    expire DURATION
    tls CERT KEY CA
    tls_servername NAME
    bootstrap BOOTSTRAP...
    no_ipv6

    ipset SETNAME...
    pf [+OPTION...] NAME[:ANCHOR]...
}

Some of the options take a DURATION as argument, zero time(i.e. 0) duration to disable corresponding feature unless it's explicitly stated otherwise. Valid time duration examples: 0, 500ms, 3s, 1h, 2h15m, etc.

FROM... and to TO... as above.
path_reload changes the reload interval between each path in FROM.... Default is 2s, minimal is 1s.
url_reload configure URL reload interval and read timeout:
- DURATION specifies reload interval between each URL in FROM.... Default is 30m, minimal is 15s.
- [read_timeout] optional argument to set URL read timeout. Default is 30s, minimal is 3s.
INLINE are the domain names embedded in Corefile, they serve as supplementaries. Note that domain names in FROM... will still be read. INLINE is forbidden if you specify .(i.e. root zone) as FROM....

It usually not a good idea to embed too many INLINE domains in Corefile, in which case you should put them into a sole file, say, user_custom.conf.
except is a space-separated list of domains to exclude from redirecting. Requests that match none of these names will be passed through.

It usually not a good idea to embed too many except domains in Corefile, in which case you should try to delete them directly in to files.
spray when all upstreams in to are marked as unhealthy, randomly pick one to send the traffic with. (Last resort, as a failsafe.)
policy specifies the policy to use for selecting upstream hosts. The default is random.
- random will randomly select a healthy upstream host.
- round_robin will select a healthy upstream host in round robin order.
- sequential will select a healthy upstream host in sequential order.
health_check configure the behaviour of health checking of the upstream hosts:
- DURATION specifies health checking interval. Default is 2s, minimal is 1s.
- [no_rec] optional argument to set RecursionDesired flag to false for health checking. Default is true, i.e. recursion is desired.
max_fails is the maximum number of consecutive health checking failures that are needed before considering an upstream as down. 0 to disable this feature(which the upstream will never be marked as down). Default is 3.
expire will expire (cached) connections after this time interval. Default is 15s, minimal is 1s.
tls CERT KEY CA define the TLS properties for TLS connection. From 0 to 3 arguments can be specified:
- tls - No client authentication is used, and the system CAs are used to verify the server certificate.
- tls CA - No client authentication is used, and the CA file is used to verify the server certificate.
- tls CERT KEY - Client authentication is used with the specified CERT/KEY pair. The server certificate is verified with the system CAs.
- tls CERT KEY CA - Client authentication is used with the specified CERT/KEY pair. The server certificate is verified with the given CA file.
Note that this TLS config is global for redirecting DNS requests.
tls_servername specifies the global TLS server name used in the TLS configuration.

For example, cloudflare-dns.com can be used for 1.1.1.1(Cloudflare), and quad9.net can be used for 9.9.9.9(Quad9).

Note that this is a global name, it doesn't affect the TLS server names specified in to TO....
bootstrap specifies the bootstrap DNS servers(must be valid IP address) to resolve domain names in to TO...(if any).
no_ipv6 specifies don't try to resolve IPv6 addresses for DNS exchange in bootstrap, in other words, use IPv4 only.
ipset(needs root user privilege) specifies resolved IP addresses from FROM... will be added to ipset SETNAME....

Note that only IPv4, IPv6 protocol families are supported, and this option only effective on Linux.

SETNAME... must be present, otherwise add IP will be failed.
pf(needs root user privilege) specifies resolved IP addresses from FROM... will be added to the pf tables denoted by NAME:[ANCHOR]...

The pf table name is a combo of name and anchor, if your table have a optional anchor, the anchor should follow the name by a colon(i.e. :).

Optional options can be specified in the format: +OPTION.... Currently, supported options are:
- +create - Create the given pf table if it does not exist.
- +v4_only - Only add IPv4 addresses to the pf tables.
- +v6_only - Only add IPv6 addresses to the pf tables.
By default, IPv4 and IPv6 will all be added to the pf tables.

Note that options should come before the pf tables.

pf is generally available in BSD-derived systems, yet this sub-directive is only effective on macOS.

Metrics

If monitoring is enabled (via the prometheus plugin) then the following metrics are exported:

coredns_dnsredir_name_lookup_duration_ms{server, matched} - duration per domain name lookup
coredns_dnsredir_request_duration_ms{server, to} - duration per upstream interaction.
coredns_dnsredir_request_count_total{server, to} - query count per upstream.
coredns_dnsredir_response_rcode_count_total{server, to, rcode} - count of RCODEs per upstream.
coredns_dnsredir_hc_failure_count_total{to} - number of failed health checks per upstream.
coredns_dnsredir_hc_all_down_count_total{to} - counter of when all upstreams marked as down.

Where server is the Server Block address responsible for the request(and metric). matched is the match flag, "1" is it's in any name list, "0" otherwise.

Caveats

To yield a maximum match performance, we search and return the first matched upstream, thus the block order between dnsredirs are important. Unlike the proxy plugin, which always try to find a longest match, i.e. position-independent search.
Inappropriate URL read timeout will cause either failed to fetch URL content or Server Block hijack(due to read timeout too large), thus DNS queries may fallback to other upstream servers, the answer may not optimal.

Bugs

Sometimes you modified Corefile and yet Caddy server failed to reload the new config with the error "Error during parsing", dnsredir will do sanity check during parsing, if you misconfiged the Corefile, you're out of lock:

Argument count mismatch, out of range arguments, unrecognizable arguments, etc.
Missing mandatory property to TO....
Used unsupported DNS transport type in to TO....
except and INLINE share some same domain names(which yields a conflict).
.(i.e. root zone) is matched yet INLINE also embedded in Server Block(still a conflict).

Also note that some of the properties are cumulative: INLINE, except, to, ipset, in which case INLINE domains should be put one domain per line.

Rationale: Strict checking to ensure that user can detect errors ASAP, and make the Corefile less confusing.

If you think you found a bug in dnsredir, please issue a bug report. Enhancements are also welcomed.

Acknowledgments

Implementation and documentation of this plugin mainly inspired by forward, proxy, hosts plugin.

Part of the code inspired by m13253/dns-over-https, missdeer/ipset.

Examples

Redirect all requests to Cloudflare DNS:

dnsredir . {
    to tls://1.1.1.1 tls://1.0.0.1
    tls_servername one.one.one.one

    # Or use domain name directly, which we don't need to specify TLS server name any more
    to tls://one.one.one.one
    # Bootstrap DNS server used to resolve one.one.one.one
    bootstrap 192.168.10.1
}

Redirect all requests to with different upstreams:

dnsredir . {
    # 1.1.1.1 uses the global TLS server name
    # 8.8.8.8 and 9.9.9.9 uses its own TLS server name
    to tls://1.1.1.1 tls://[email protected] tls://[email protected]
    tls_servername cloudflare-dns.com
}

Redirect domains listed in file and fallback to Google DNS:

dnsredir accelerated-domains.china.conf {
    path_reload 3s
    max_fails 0
    to 114.114.114.114 223.5.5.5 udp://119.29.29.29
    policy round_robin

    # INLINE domain
    example.org
    example.net
}

dnsredir google.china.conf apple.china.conf {
    path_reload 10s
    to tls://dns.rubyfish.cn dns://101.6.6.6
    except adservice.google.com doubleclick.net
}

dnsredir . {
    to tls://[email protected] tls://2001:4860:4860::[email protected]
    policy sequential
    spray
}

Add resolved domain name IPs in list file to ipset cn4 and cn6:

dnsredir user_custom.conf {
    to 192.168.10.1 192.168.20.1
    ipset cn4 cn6
}

Sample Corefile for dnsredir plugin contain a full-featured Corefile, although it mainly targets for China mainland users, you can also use it as a cross reference to write your own Corefile.

LICENSE

dnsredir uses the same LICENSE as with CoreDNS.

Cheap and reliable Node.js hosting starts at $3/month, and $1/month static HTML hosting

leiless / dnsredir

Programming Languages

Labels

Projects that are alternatives of or similar to dnsredir