silver13 / Eachine E011
Programming Languages
E011 Alternate Firmware
- Note, santa version uses bwhoop pro code
The board pads ( near the middle ) are reverse labeled. The 4 pin connector is correctly labeled.
Thanks to rcg user "NotfastEnough" for figuring out the hardware connctions
Factory firmware
The factory firmware can be flashed back after using this, it's in the bin folder
Gestures
The firmware uses "gestures" to activate certain features, currently accelerometer calibration, acro / level mode switch and pid gestures ( field tuning )
Gestures reference: http://sirdomsen.diskstation.me/dokuwiki/doku.php?id=gestures
Flashing the firmware
Flashing instructions ( uses St-link Utility program ): https://www.rcgroups.com/forums/showthread.php?2876797-Boldclash-bwhoop-B-03-opensource-firmware
Compiling instructions ( uses Keil uVision IDE): https://www.rcgroups.com/forums/showthread.php?2877480-Compilation-instructions-for-silverware#post37391059
Wiki
http://sirdomsen.diskstation.me/dokuwiki/doku.php?id=start
02.07.17
- initial code