spoqa / Geofront Cli
Programming Languages
Projects that are alternatives of or similar to Geofront Cli
Geofront CLI client
.. image:: https://badge.fury.io/py/geofront-cli.svg? :target: https://pypi.python.org/pypi/geofront-cli :alt: Latest PyPI version
.. image:: https://travis-ci.org/spoqa/geofront-cli.svg? :target: https://travis-ci.org/spoqa/geofront-cli :alt: Build status (Travis CI)
.. image:: https://ci.appveyor.com/api/projects/status/wjcgay1b4twffwbc?svg=true :target: https://ci.appveyor.com/project/dahlia/geofront-cli :alt: Build status (AppVeyor)
It provides a CLI client for Geofront_, a simple SSH key management server.
.. _Geofront: https://geofront.readthedocs.org/
Installation
It is available on PyPI__, so you can install it using pip
installer.
We, however, recommend to use pipsi_ instead so that geofront-cli and its
dependencies don't make your global site-packages messy.
.. code-block:: console
$ pipsi install geofront-cli
__ https://pypi.python.org/pypi/geofront-cli .. _pipsi: https://github.com/mitsuhiko/pipsi
Getting started
What you have to do first of all is to configure the Geofront server URL.
Type geofront-cli start
and then it will show a prompt:
.. code-block:: console
$ geofront-cli start Geofront server URL:
We suppose http://example.com/
here. It will open an authentication
page in your default web browser:
.. code-block:: console
$ geofront-cli start Geofront server URL: http://example.com/ Continue to authenticate in your web browser... Press return to continue
List available remotes
You can list the available remotes using geofront-cli remotes
command:
.. code-block:: console
$ geofront-cli remotes web-1 web-2 web-3 worker-1 worker-2 db-1 db-2
If you give -v
/--verbose
option it will show their actual addresses
as well:
.. code-block:: console
$ geofront-cli remotes -v web-1 [email protected] web-2 [email protected] web-3 [email protected] worker-1 [email protected] worker-2 [email protected] db-1 [email protected] db-2 [email protected]
SSH to remote
You can easily connect to a remote through SSH. Use geofront-cli ssh
command instead of vanilla ssh
:
.. code-block:: console
$ geofront-cli ssh web-1 Welcome to Ubuntu 12.04.3 LTS (GNU/Linux 2.6.32-042stab078.27 i686)
* Documentation: https://help.ubuntu.com/
In most cases, you probably need to list remotes to find an alias to SSH
before run geofront-cli ssh
command. geofront-cli go
command is
a single command for these two actions at once:
.. code-block:: console
$ geofront-cli go (...interactive fuzzy finder for remotes is shown...) Welcome to Ubuntu 12.04.3 LTS (GNU/Linux 2.6.32-042stab078.27 i686)
* Documentation: https://help.ubuntu.com/
Note that there's a shortcut command gfg
which is an alias of
geofront-cli go
.
There is geofront-cli scp
command as well, which is corresponding
to scp
:
.. code-block:: console
$ geofront-cli scp file.txt web-1:file.txt file.txt 100% 3157 3.1KB/s 00:00 $ geofront-cli scp -r web-1:path/etc/apt ./ sources.list 100% 3157 3.1KB/s 00:00 trusted.gpg 100% 14KB 13.9KB/s 00:00
Missing features
- Shortcut for
geofront-cli ssh
command - Make
geofront-cli ssh
similar tossh
- Autocompletion
Author and license
Hong Minhee
__ wrote geofront-cli, and Spoqa_ maintains it.
It is licensed under GPLv3_ or later.
__ https://hongminhee.org/ .. _Spoqa: http://www.spoqa.com/ .. _GPLv3: http://www.gnu.org/licenses/gpl-3.0.html
Changelog
Version 0.4.5
To be released.
Version 0.4.4
Released on April 03, 2020.
- Fixed some command won't work properly.
This bug occured when running ssh or scp command through the other command.
(e.g.
geofront-cli go
) [#19
__ by cynthia]
__ https://github.com/spoqa/geofront-cli/pull/19
Version 0.4.3
Released on March 25, 2020.
- Added jump host options to use ProxyJump in SSH. [`#18`__ by cynthia]
__ https://github.com/spoqa/geofront-cli/pull/18
Version 0.4.2
Released on February 26, 2020.
- Added supporting for LibreSSL. [
#16
__ by cynthia]
__ https://github.com/spoqa/geofront-cli/pull/16
Version 0.4.1
Released on May 24, 2017.
- Fixed a bug that ``geofront-cli go``/``gfg`` had crashed with
``AttributeError`` when a user cancelled (i.e. Ctrl-C) to select a remote.
[`#10`__]
__ https://github.com/spoqa/geofront-cli/issues/10
Version 0.4.0
Released on May 23, 2017.
- Dropped support of Python 2.6 and 3.2.
-
geofront-cli go
command and its alias shortcutgfg
were introduced. It's an interactive user interface to select a remote and SSH to it at once. - Fixed verification failure of SSL certificates when Python was installed using Homebrew on macOS. Now it depends on Certifi_.
- Now the output list of
geofront-cli remotes
is sorted. - The second column of
geofront-cli remotes --verbose
result became vertically aligned. - The second column of
geofront-cli remotes --verbose
result became to omit the port number if it's 22 so that these are easy to copy-and-paste into other SSH programs. - Loading spinners became shown when time-taking tasks are running.
.. _Certifi: https://github.com/certifi/python-certifi
Version 0.3.4
Released on April 3, 2017.
- Fixed ``UnicodeError`` during signing the running Python 3 executable
on macOS.
Version 0.3.3
Released on March 30, 2017.
- Now
-d
/--debug
option prints more debug logs. - Fixed
system errors during getting/setting password through keyring/Keychain on macOS due to some unsigned Python executables
__.
__ https://github.com/jaraco/keyring/issues/219
Version 0.3.2
Released on May 31, 2016.
- Fixed ``ImportError`` on Python 2.6.
Version 0.3.1
Released on May 28, 2016.
- Forward compatibility with Geofront 0.4.
Version 0.3.0
Released on January 15, 2016.
- Fixed an ``AttributeError`` during handling error sent by server.
[`#4`__]
__ https://github.com/spoqa/geofront-cli/issues/4
Version 0.2.2
Released on November 14, 2014.
- Added
-v
/--version
option. - Fixed an
AttributeError
during handling error from server. [#2
,#3
by Lee Jaeyoung]
__ https://github.com/spoqa/geofront-cli/issues/2 __ https://github.com/spoqa/geofront-cli/pull/3
Version 0.2.1
Released on June 29, 2014.
- Added ``geofront-cli scp`` command.
- Added the short option ``-S`` for ``--ssh``.
- It becomes to no more depend on dirspec_. Instead it's simply bundled
together.
- ``geofront-cli`` now prints a usage description when no subcommand specified.
.. _dirspec: https://pypi.python.org/pypi/dirspec
Version 0.2.0
Released on May 3, 2014.
- Added handling of unfinished authentication error.
- Added handling of incompatible protocol version.
Version 0.1.1
Released on April 22, 2014.
- Fixed Python 2 incompatibility.
- Added warning for non-SSL server URL.
Version 0.1.0
First pre-alpha release. Released on April 21, 2014.