IKEA-Samla-Inserts
OpenSCAD script to generate inserts for IKEA Samla boxes
Features
- inserts for 5, 11 and 22 liters boxes
- adjustable grid
- adjustable bottom thickness and wall thickness
- splittable insert layers (halve and quarter possible)
- engraving or embossing of layer marks (toggleable and customizable)
- combine layers, useful if you want an even layer count but layers with uneven height ratios
WARNING!!! WIP!!!
This is still work-in-progress! Pull requests welcome!
I did a lot of test prints and finally I printed a whole set for each box size!
Measures look good, very good to me, no great adjustments needed anymore! Happy printing!
But this does not mean it is perfect for your printer, print settings and material!
Usage
- Get and install OpenSCAD.
- Load the script and adjust the values, generate all the STL you need for one box.
- Print! :P
Tips
There are three main goals:
- nice finish of the bottom layers
- stiff walls
- wall layer adhesion
The initial values for bottom and wall thickness are base on my settings for a 0.4mm nozzle with a 0.3mm layer height.
I do 3 bottom layers. My first layer is set to 90% so 0.3 * 0.9 + 2 * 0.3 = 0.87.
That's where the values come from.
I have the best printing results with these setting because that way I get two perimeter lines for the outer walls and the grid walls. (40% perimeter overlap allowed.)
I also tried using a 0.8mm nozzle with just one line for the walls. Layer adhesion was pretty good with literally no cooling (10% fan speed) but I had issues with the moving paths and retractions leading to non-touching walls so I can't recommend this.
I am still playing with the print settings to get a nice bottom finish and good wall adhesion. Still I think two perimeters for a wall are better than printing just one wall line.
Maybe get a simple small hollow box to test your settings, but be aware, very long straight extrusions may behave a little different than a short one...