libmaix

中文 README

A library for embeded AI model inference with hardware acceleration，let's build a better AIOT together~

Now support platform:

• V831
• R329
• linux desktop

Build

Current only test pass on Ubuntu18.04 and Ubuntu20.04

• Install dependence

apt install build-essential cmake python3 sshpass git

• Check cmake version, should >= v3.9 Check CMake version by

cmake --version

The cmake version should be at least v3.9, if not, please install latest cmake manually from cmake website

• Setup toolchain

Download toolchain first:

Unzip to /opt/ directory

tar -Jxvf toolchain-sunxi-musl-pack-2021-01-09.tar.xz -C /opt

Then you can see toolchain-sunxi-musl folder under /opt directory by command ls /opt

• Get libmaix source code

git clone https://github.com/sipeed/libmaix --recursive

Note that the --recursive parameter is used here, because sub-modules are used in the project. The advantage of sub-modules is that each project is managed separately. For example, Kconfiglib is used as a sub-module to provide menuconfig with interface function configuration.

If you did't update submodule, the compile will error!!!!

If you forget to add this parameter when cloning, you can also use the following command to update the submodule:

git submodule update --init --recursive

In addition, when the remote repository is updated, the user also needs to use the following command to update the code (ie update the submodule code at the same time):

git pull --recursive

or:

git pull
git submodule update --init --recursive

• Config project

cd libmaix
cd examples/hello-world

Every time change toolchain, you MUST call distclean to clean all temporary files:

python3 project.py distclean

Then config toolchain info according to your CPU architecture

python3 project.py --toolchain /opt//opt/toolchain-sunxi-musl/toolchain/bin --toolchain-prefix arm-openwrt-linux-muslgnueabi- config

or only set prefix python3 project.py --toolchain /usr/bin/ --toolchain-prefix x86_64-linux-gnu- config

Finally config component configurations

python3 project.py menuconfig

You can select the module you want here, and config target info like IP or user info for upload bin files etc.

For first time compile, you can just use the default configuration.

Then push q key to exit, and select yes to save configuration.

• Build hello-world example

python3 project.py build

Then you can see the bin file hello-world in dist directory

• Upload bin files to target

You can manually copy dist folder to your target file system, e.g. use scp or adb.

adb push ./dist/ /root/ && adb shell "cd /root/dist/ && ./start_app.sh"

You can also config target info in the menuconfig, and upload by:

python3 project.py upload

This uses sshpass + scp for transmission, But sshpass will not let the user enter the password when it encounters the ssh key for identification, but will directly exit without reporting an error. You can execute sudo sh -c "echo StrictHostKeyChecking no >>/etc/ssh/ssh_config" on the computer to close the check, Or if you don’t fill in the password in menuconfig, you won’t use sshpass, or you can manually copy it once with scp

Or you can just assign target info in command arg:

python3 project.py upload --target [email protected]:/root/maix_dist --passwd 123

• Clean build temp files and result files

Clean temp build files:

python3 project.py clean

Clean all build and result, and this will clean all configuration configed by python3 project.py menuconfig:

python3 project.py distclean

• Run executable bin file

Bin files in the dist directory contains some library like *.a or *.so, copy all of then, then execute ./start_app.sh

Create your own project

There's two way to create project

Way 1. Create project in libmaix SDK

• Just copy examples/hello-world to examples/my-project

• Or create a new directory, e.g. copy examples/hello-world to projects/my-project

Way 2. Create project in anywhere of the filesystem

• Clone libmaix to a directory, such as /home/sipeed/libmaix

• Then export the variable export LIBMAIX_SDK_PATH=/home/neucrack/my_SDK in the terminal, which can be placed in the ~/.bashrc or ~/.zshrc file, so that this variable will be automatically added every time the terminal is started

• Then create a project anywhere, such as copy the entire content of the folder example/hello-world to /home/sipeed/my_projects/my-project

• Finally compile in /home/sipeed/my_projects/my-project directory by python3 project.py build, and maybe you need to execute python3 project.py distclean first to clean the old temp files

Add source files

• For simple project, you just add files to your project's main/src and main/include directory.
• You can add your own component at you project root directory, just copy main folder to a new folder like examples/my-project/mylib, and edit examples/my-project/mylib/CMakeLists.txt to add source files, and also edit examples/my-project/main/CMakeLlist edit

list(APPEND ADD_REQUIREMENTS libmaix)

to

list(APPEND ADD_REQUIREMENTS libmaix mylib)

More compile framwork usage see c_cpp_project_framework

License

MIT， see LICENSE