• nixos-manager — manage your NixOS graphically

[[https://www.gnu.org/licenses/gpl-3.0][https://img.shields.io/badge/License-GPLv3-blue.svg]] [[https://travis-ci.com/pmiddend/nixos-manager.svg?branch=master][https://travis-ci.com/pmiddend/nixos-manager.svg?branch=master]]

** Rationale

The idea is to build something to configure NixOS graphically. To me, this means: managing the installed software packages, and managing the enabled services, as well as updating and garbage-collecting. For the moment, I’m focusing on a solution for a declarative, global configuration; so /for the moment/ it’s not calling =nix-env= and it’s not supporting =home-manager=.

The goal is not to make all of NixOS accessible via a GUI, and not give an alternative to writing Nix expressions for your configuration. Instead, this is a project to explore how far you can get graphically after installing NixOS (which — in the future — might be possible via a GUI installer as well).

** Approach

Since the NixOS configuration is very “free-form”, I have to make some assumptions about the structure of your =configuration.nix= file, as such:

• You have two additional =.nix= files, referenced from the =imports= section in your =configuration.nix=: =packages.nix= and =services.nix=
• =packages.nix= is a flat list of packages
• =services.nix= is a list of service options, like services.xserver.enable = true.

In nixos-manager, you can mark packages for installation. They will be added to your /local/ copy of =packages.nix=. You can then trigger a nixos-rebuild from inside nixos-manager, which copies your local installation to the /global installation/ inside =/etc/nixos/nixos-manager/packages.nix=. Same for configuring services and =services.nix=.

To gather service definitions, nixos-manager downloads and parses https://nixos.org/nixos/options.json. This way, the service definitions might not accurately reflect your system configuration, but I just found no other way to gather the definitions, see [[https://discourse.nixos.org/t/list-available-services-and-their-options/][this Discourse thread]].

** Screenshots *** Welcome screen, featuring a frontend for =nixos-rebuild=

[[./screenshots/admin.png]]

*** Welcome screen for =home-manager= users

[[./screenshots/home-manager.png]]

*** Search and install (or try) packages

[[./screenshots/packages.png]]

*** Configure services

[[./screenshots/services.png]] ** Screencast

[[https://www.youtube.com/watch?v=Fa4_9ueOdpY&feature=youtu.be][Watch on YouTube]]

Please recommend to me another platform where I can upload this, preferably lossless as the source mkv that I have.

** FAQ *** Have you seen [[https://github.com/haskell-nix/hnix][hnix]]? Why don’t you parse your you Nix files with

I’d love to! But sadly and ironically, it’s currently [[https://github.com/NixOS/nixpkgs/issues/82233][broken]] in nixpkgs. I’m waiting for someone to repair it, as I don’t have the knowledge to do that.

I’m using Haskell as the language of choice, simply because =hnix= is available and allows me to easily parse and serialize the relevant Nix configuration files. The GUI is made via =gi-gtk-declarative=, which serves me well and is pretty stable.

*** Can I configure NixOS using this tool and manually at the same time?

Yes, that’s possible. The files that nixos-manager uses shouldn’t be edited by hand, but you can configure services and packages the regular way as well, by editing =configuration.nix=. Thus, nixos-manager is just an enhancement.

*** The list of packages only lists packages installed by nixos-manager, not globally installed ones. How come?

The simple reason is: I haven’t gotten to that part yet, and my Nix knowledge is so limited I’d have to ask how do that first.

** Building

nixos-manager isn’t in nixpkgs yet, so you’ll have to build it using…Nix!

#+begin_src bash nix-build -I nixpkgs=channel:nixos-unstable #+end_src

The channel argument is necessary in case you’re not on =nixos-unstable=. ** Setup and running *** With home-manager After building it (see above), you have to tell home-manager to read nixos-manager’s configuration files. To do that, open your =~/.config/nixpkgs/home.nix= file and insert the following somewhere inside the main attribute set:

#+begin_example imports = [ ./hm-extra-services.nix ./hm-extra-packages.nix ];

manual.json.enable = true; #+end_example

nixos-manager, when run in home-manager mode, will write these extra files. The second line enables JSON export of the available options in home-manager, which nixos-manager reads to generate the configuration UI.

To run nixos-manager in home-manager mode, simply run it with the =--home-manager= argument. For example, if you built it with Nix, run:

#+begin_example result/bin/nixos-manager --home-manager #+end_example

If you’ve built it with =cabal= (for example, to try it out after changing the code), run:

#+begin_example cabal v2-run nixos-manager -- --home-manager #+end_example

*** With NixOS After building it (see above), you have to tell NixOS to read nixos-manager’s configuration files. To do that, open your =/etc/nixos/configuration.nix= file and look for a line containing imports = …. Usually it looks something like this:

#+begin_src nix {

…

imports = [ # Include the results of the hardware scan. ./hardware-configuration.nix ];

…

} #+end_src

So =imports= contains an array of Nix files. You can extend this array by just listing more files, separated by spaces. To use NixOS manager, extend the list as such:

#+begin_src nix {

…

imports = [ # Include the results of the hardware scan. ./hardware-configuration.nix ./nixos-manager/services.nix ./nixos-manager/packages.nix ];

…

} #+end_src

nixos-manager will create these two files when you apply changes.

** Current status

• The frontend for =nixos-rebuild= works. It supports =--upgrade= and =--rollback=.

• =nix-collect-garbage= is also supported, supporting the =-d= flag.

• Rebuilding copies =packages.nix= and =services.nix= to =/etc/nixos/nixos-manager=. Without these files being included in your =configuration.nix=, they’re worthless, though.

• Configuring services works, with some minor quirks.

• Trying packages works, and installing/uninstalling too. The =packages.nix= will be updated accordingly. ** Contributing guide *** Prerequisites

• nixos-manager is written in [[https://www.haskell.org/][the Haskell Language]]. You should be proficient with this language. I can’t give a full recommendation list for learning it (can anyone reading this?). It’s /really/ worth it though. Some books are

  • [[http://book.realworldhaskell.org/][Real World Haskell]] (free)
  • [[http://learnyouahaskell.com/][Learn You a Haskell for Great Good!]] (free)
  • [[https://www.amazon.com/Programming-Haskell-Graham-Hutton/dp/1316626229/ref=sr_1_1?dchild=1&keywords=haskell&qid=1585907775&sr=8-1][Programming in Haskell: Hutton, Graham (Amazon-Link)]]
  • [[https://haskellbook.com/][Haskell Programming from first principles]]

• I’m using [[https://www.gtk.org/][the GTK toolkit]] and specifically [[https://owickstrom.github.io/gi-gtk-declarative/][gi-gtk-declarative]] as a declarative approach to writing GTK applications. The documentation is [[https://owickstrom.github.io/gi-gtk-declarative/widgets/the-widget-type/][here]]. A good blog post by the author is [[https://wickstrom.tech/programming/2018/09/04/declarative-gtk-programming-with-haskell.html][Declarative GTK+ Programming with Haskell]]. *** Code structure

Each module has haddock documentation. Finding information about the code just from that might be difficult though, so let me give you a short overview:

• Each of the tabs you see (notebook pages, in GTK-Speak) has a submodule. There’s =NixManager.Admin=, =NixManager.Services= and =NixManager.Packages=, respectively.

• Inside each such submodule you have modules =Event=, =Update= and =View=.

  • =Event= contains the even data type for the submodule (which is then embedded in =NixManager.ManagerEvent=)
  • =Update= contains the update handler (a function receiving the current state and an event and returns a new state, as well as an event and IO side-effects)
  • =View= contains the =gi-gtk-declarative= classes for the notebook page.
  • =State= contains the state corresponding to the subsystem

• When starting a process, such as the rebuild process, we cannot easily run it in the background and emit an event when it’s finished (at least I don’t know how to do that comfortably with =gi-gtk-declarative-app-simple=). Instead, we are spawning the process (in the background, mind you), then wait for a small amount of time (which doesn’t block the GUI, fortunately) and then emit a “watch” event, which does the same thing, until the process signals completion. It sounds hacky, and it is, but it’s not that bad. ** Alternatives

• [[https://gitlab.com/juliendehos/nix42b][nix42b]] — is another user-friendly Nix package manager, also written in Haskell. It doesn’t seem to be actively maintained anymore. ** Donations

[[https://paypal.me/PhilippMiddendorf][PayPal.Me]]