dombeef / Pocketetris
Licence: mit
Compact Tetris clone
Stars: ✭ 26
Labels
Projects that are alternatives of or similar to Pocketetris
Midi Rotary Encoder
Teensy++ MIDI controller with 4 LED ring rotary Encoders
Stars: ✭ 23 (-11.54%)
Mutual labels: arduino
Coapnet
CoAPnet is a high performance .NET library for CoAP based communication. It provides a CoAP client and a CoAP server. It also has DTLS support out of the box.
Stars: ✭ 23 (-11.54%)
Mutual labels: arduino
Halloweenfire
🎃 Arduino sketch for multiple neopixels to create spooky 'fire' effect
Stars: ✭ 24 (-7.69%)
Mutual labels: arduino
Adc test
Tutorial: Make the Arduino Analog Readings more precise
Stars: ✭ 25 (-3.85%)
Mutual labels: arduino
Ethercard
EtherCard is an IPv4 driver for the ENC28J60 chip, compatible with Arduino IDE
Stars: ✭ 924 (+3453.85%)
Mutual labels: arduino
Mqtt via esp01
TCP/UDP Applicaton for UNO/MEGA/STM32 using ESP8266's AT firmware.
Stars: ✭ 23 (-11.54%)
Mutual labels: arduino
Dustduino
Project to collect and distribute particulate matter readings
Stars: ✭ 22 (-15.38%)
Mutual labels: arduino
Rubber Ducky Library For Arduino
An Arduino library that allows you to use a cheap Arduino (Leonardo) as a Rubber Ducky
Stars: ✭ 25 (-3.85%)
Mutual labels: arduino
Arduino Pro Ide
The Arduino IDE for advanced users and developers. Experimental alpha version.
Stars: ✭ 917 (+3426.92%)
Mutual labels: arduino
Send altitude cocoos
IoT program for Arduino Uno / STM32 Blue Pill (libopencm3) that reads BME280 temperature + humidity + altitude sensors, via I2C or SPI with DMA and multitasking. Sends sensor data to Sigfox via Wisol Sigfox module on UART. Runs on cocoOS task scheduling library http://www.cocoos.net
Stars: ✭ 24 (-7.69%)
Mutual labels: arduino
Music Reactive Ws2812b Arduino
LED STRIP WS2812B reacting to music connected through your AUX 3.5mm Jack as seen on cine-light youtube
Stars: ✭ 26 (+0%)
Mutual labels: arduino
Uduino
Simple and easy connection between Arduino and Unity
Stars: ✭ 25 (-3.85%)
Mutual labels: arduino
Ethercardexamples
New examples for EtherCard ENC28J60 library
Stars: ✭ 24 (-7.69%)
Mutual labels: arduino
pockeTETRIS
This project originally was meant as a fathers day gift for my tetris-loving father, and I felt like it should be available for others if they want to make a pretty small tetris clone. This was the smallest I could make it with a big enough battery and a thick durable 3d printed housing.
I modified tetris code created by Andy Jackson to be used with 3 buttons, since his original code was made for the AttinyArcade platform that has 2 buttons.
BOM
Part | Part number/ place to buy |
---|---|
Attiny85 | ATTINY85-20PU |
CR2032 | CR2032 |
Coin cell holder | BAT-HLD-001-THM |
PCB from OSH Park | https://oshpark.com/shared_projects/mLy9Mwcr |
3d printed case | STL's available in the catia subfolder |
buttons | 6x6x5 mm Push Button |
OLED 0.96' | DIYmall 0.96" OLED |
10 k Resistors | 1/4 Watt 10k ohm Resistors |
Note that the project description data, including the texts, logos, images, and/or trademarks,
for each open source project belongs to its rightful owner.
If you wish to add or remove any projects, please contact us at [email protected].