Note:

There is a very useful tools collection available, called usb-tools Running Raspbian from USB Devices : Made Easy which contains four very nice tools called usb-boot, sdc-boot, mbr2gpt and set-partuuid.

raspberryTools

Collection of some useful tools for Raspberry Pi. For sample outputs of the tools click the links.

raspiNetInfo.sh - Collect network information for people who want to help in network problem determination and test for common network configuration errors
checkWLANAndRestart.sh - Check on regular base for WLAN connection and either restart network interface or reboot Raspberry if there is no connection
checkThrottled.sh - Check Raspberry throttled bits with vcgencmd get_throttled and display their meaning if throtteling happened since boot or since last script invocation
testCPUTemperature.sh - Generates 100% CPU load on a Raspberry and monitors the CPU temperature. Useful to test the effectiveness of a heat sink and/or fan.
retrieveTerrabytesWritten.sh - Either retrieves the Total Bytes Written of all existing SSDs on the system or a specific SSD. Helps to get an idea when the SSD will reach it's end of life.
retrieveLifetimeWrites.sh - Either retrieves the LifetimeWrites of one or all existing ext2/ext3 and ext4 partitions. Helps to get an idea when the SD card or disk will reach it's end of life.
findRaspis.sh - Scan the local net for Raspberries and print the IPs, macs and hostnames sorted by IP
smsRelay.py - Receives all SMS and forwards them to an eMail. UMTS stick and python2 required
checkPARTUUIDsInDDImage.sh - Retrieve PARTUUIDs of Raspberry dd Backup image partitions /boot and / and check if they match in /boot/cmdline.txt and /etc/fstab
syncUUIDs.sh - Update /boot/cmdline.txt and /etc/fstab on a device with the UUIDs or PARTUUIDs used on the device. Useful when an image was cloned on another device.

findRaspis.sh

findRaspis.sh
Scanning subnet 192.168.0.0/24 for Raspberries...
4 Raspberries found
Retrieving hostnames ...
IP address      Mac address       Hostname
192.168.0.8     b8:27:eb:b4:e8:74 troubadix
192.168.0.10    b8:27:eb:3c:94:90 idefix
192.168.0.11    b8:27:eb:30:8a:52 obelix
192.168.0.12    dc:a6:32:8f:28:fd asterix

checkThrottled.sh

Code

pi@raspberrypi-buster:~ $ ./checkThrottled.sh
Throttling in hex (bits reset on boot): 0x20000
Bit 17 set: Arm frequency capped has occurred
Throttling in hex: 0x20002 (bits reset every call)

testCPUTemperature.sh

Code

pi@raspberrypi-buster:~ $ ./testCPUTemperature.sh -i 5
Generate 100% CPU utilization and measure CPU temperature ...
CPU watch interval: 5s
Watch +0s:temp=55.8'C
Starting run 1: +0s:temp=56.4'C
Watch +5s:temp=64.5'C
Watch +10s:temp=67.7'C
Watch +15s:temp=70.4'C
Watch +20s:temp=73.1'C
Watch +25s:temp=74.1'C
Watch +30s:temp=76.3'C
Watch +35s:temp=77.4'C
Watch +40s:temp=79.0'C
Watch +45s:temp=80.6'C
Watch +50s:temp=80.6'C
Watch +55s:temp=81.1'C
Watch +60s:temp=81.7'C
Watch +65s:temp=82.2'C
Watch +70s:temp=82.7'C
Watch +75s:temp=82.7'C

retrieveLifetimeWrites.sh

Code

sudo retrieveLifetimeWrites.sh  -a
LTW of /dev/mmcblk0p2: 57.35 GiB
LTW of /dev/sdd1: 1.66 TiB
LTW of /dev/md0: 596.31 GiB

retrieveTerrabytesWritten.sh

Code

sudo retrieveTBW.sh -a
TBW of sda: 1.56 TiB

smsRelay.py

Sample eMail relayed for a *ping SMS

Dear SMSRelayUser

I just received following SMS from +4947114712 for +4947144715 which I forward to you:

--- START SMS ---
*ping
---  END SMS  ---

Hope you enjoy my service.

Regards

Your SMS relay server on smsrelay.dummy.com

raspiNetInfo.sh

Code

Tests executed:

IP assigned?
ping of IP in internet possible?
ping of hostname in internet possible?
default gateway defined?
nameserver defined in /etc/resolv.conf
ssid found with iwlist scan?
ssid conforms to IEEE 802.11?

Sensitive information like external IPs, MAC addresses, SSIDs and keys in config files are masqueraded.

Sample output of script for ethernet

pi@raspberrypi ~ $ ./raspiNetInfo.sh -e
This program comes with ABSOLUTELY NO WARRANTY; This is free software, and you are welcome to redistribute it under certain conditions
[spoiler][code]
raspiNetInfo.sh V0.2.9, $/$ -
--- RNI010I: Starting collection of data and network analysis. This may take some time ...
--- RNI012I: Ping of 8.8.8.8 successful
--- RNI012I: Ping of www.google.com successful
--- uname -a
Linux raspberrypi 4.1.13+ #826 PREEMPT Fri Nov 13 20:13:22 GMT 2015 armv6l GNU/Linux
--- [ -d /home/pi/.xbmc ]
no
--- ip a s | egrep "(eth|wlan)
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether @@:@@:@@:@@:@@ brd @@:@@:@@:@@:@@
    inet 192.168.0.109/24 brd 192.168.0.255 scope global eth0
       valid_lft forever preferred_lft forever
       valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether @@:@@:@@:@@:@@ brd @@:@@:@@:@@:@@
    inet 192.168.0.118/24 brd 192.168.0.255 scope global wlan0
       valid_lft forever preferred_lft forever
       valid_lft forever preferred_lft forever
--- cat /etc/resolv | grep -i "nameserver"
nameserver 192.168.0.1
--- cat /etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
--- cat /etc/hosts
127.0.0.1	localhost raspberrypi.@@@@@@@@@@.de
127.0.1.1	owncloud
--- ip r s | egrep "(eth|wlan)"
default via 192.168.0.1 dev eth0
192.168.0.0/24 dev eth0  proto kernel  scope link  src 192.168.0.109
192.168.0.0/24 dev wlan0  proto kernel  scope link  src 192.168.0.118
--- ip n s
192.168.0.6 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.3 dev eth0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.10 dev eth0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.1 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.113 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.3 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.6 dev eth0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.1 dev eth0 lladdr @@:@@:@@:@@:@@:@@ REACHABLE
192.168.0.113 dev eth0 lladdr @@:@@:@@:@@:@@:@@ REACHABLE
--- RNI016I: Check logile raspiNetInfo.log for sensitive data before publishing
[/code][/spoiler]

Sample output of script for WLAN

pi@raspberrypi ~ $ ./raspiNetInfo.sh -s MySSID
This program comes with ABSOLUTELY NO WARRANTY; This is free software, and you are welcome to redistribute it under certain conditions
[spoiler][code]
raspiNetInfo.sh V0.2.9, $/$ -
--- RNI010I: Starting collection of data and network analysis. This may take some time ...
--- RNI012I: Ping of 8.8.8.8 successful
??? RNI013E: Ping of www.google.com failed
--- uname -a
Linux raspberrypi 4.1.13+ #826 PREEMPT Fri Nov 13 20:13:22 GMT 2015 armv6l GNU/Linux
--- [ -d /home/pi/.xbmc ]
no
--- ip a s | egrep "(eth|wlan)
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether @@:@@:@@:@@:@@ brd @@:@@:@@:@@:@@
    inet 192.168.0.109/24 brd 192.168.0.255 scope global eth0
       valid_lft forever preferred_lft forever
       valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether @@:@@:@@:@@:@@ brd @@:@@:@@:@@:@@
    inet 192.168.0.118/24 brd 192.168.0.255 scope global wlan0
       valid_lft forever preferred_lft forever
       valid_lft forever preferred_lft forever
--- cat /etc/resolv | grep -i "nameserver"
nameserver 192.168.0.1
--- cat /etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
--- cat /etc/hosts
127.0.0.1	localhost raspberrypi.@@@@@@@@@.de
127.0.1.1	owncloud
--- ip r s | egrep "(eth|wlan)"
default via 192.168.0.1 dev eth0
192.168.0.0/24 dev eth0  proto kernel  scope link  src 192.168.0.109
192.168.0.0/24 dev wlan0  proto kernel  scope link  src 192.168.0.118
--- ip n s
192.168.0.6 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.3 dev eth0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.10 dev eth0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.1 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.113 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.3 dev wlan0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.6 dev eth0 lladdr @@:@@:@@:@@:@@:@@ STALE
192.168.0.1 dev eth0 lladdr @@:@@:@@:@@:@@:@@ REACHABLE
192.168.0.113 dev eth0 lladdr @@:@@:@@:@@:@@:@@ REACHABLE
--- lsusb | grep -v "root hub" | grep -i "wire"
Bus 001 Device 006: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271]
--- iwconfig (eth und wlan)
wlan0     IEEE 802.11bgn  ESSID:"@@@@@@@@"
          Mode:Managed  Frequency:2.412 GHz  Access Point: @@:@@:@@:@@:@@
          Link Quality=40/70  Signal level=-70 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:5308   Missed beacon:0
--- /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
	ssid="@@@@@@@@"
	psk="@@@@@@@@"
	proto=RSN
	key_mgmt=WPA-PSK
	pairwise=CCMP
	auth_alg=OPEN
}
--- grep wpa_action /var/log/messages | tail -n 15
--- RNI016I: Check logile raspiNetInfo.log for sensitive data before publishing
[/code][/spoiler]

Cheap and reliable Node.js hosting starts at $3/month, and $1/month static HTML hosting

framps / raspberryTools

Programming Languages

Labels

Projects that are alternatives of or similar to raspberryTools

Note:

raspberryTools

findRaspis.sh

checkThrottled.sh

testCPUTemperature.sh

retrieveLifetimeWrites.sh

retrieveTerrabytesWritten.sh

smsRelay.py

raspiNetInfo.sh

Sample output of script for ethernet

Sample output of script for WLAN