Razer Blade 15 Base Model Hackintosh

Intro

First of all, you need to know that a some things will not work on macOS!

This repository contains all the necessary files that I used to Hackintosh my Razer Blade

This EFI is based on Razer Blade 15 Base Model 2019 Hackintosh by The Mysticle tutorial.

NEW VERSION

The current CLOVER EFI folder is not compatible with Catalina and Big Sur! Also, it uses CLOVER. You can download the EFI_OC folder which is a new EFI folder for macOS 10.15+ (cause it uses MacBookPro16,1 SMBIOS) that uses OpenCore, which will have better support for future macOS updates!

Also, there are no unnecessary patches on OpenCore because I only patched required SSDT, there is no DSDT patch like on CLOVER!

I will not explain you how to install macOS because there are a lot of tutorials to do it! I will only explain how to have maximum hardware working after macOS installation

Hardware

What works?

Intel UHD Graphics 630 (with full hardware acceleration using WhateverGreen)
Wifi and Bluetooth (using itlwm and IntelBluetoothFirmware)
Realtek Ethernet card (using RealtekRTL8111)
Integrated speakers + mic and external speakers/headphones + mic on jack port (using AppleALC with layout-id 21 for ALC256 codec)
Battery status (using SMCBatteryManager)
Integrated 720p Webcam
Trackpad (with all gestures using VoodooI2C)
AirDrop and Apple Watch Unlock (After network card upgrade)

What doesn't work?

AirDrop and Apple Watch Unlock with native Intel card (should be replaced with a Broadcom one)
NVIDIA GPU (No drivers for RTX 2060 / GTX 1660)
HDMI / mDP / USB-C to HDMI (They are connected to the NVIDIA GPU - You can use an external USB display using DisplayLink technology or things like this)

Fixes

WiFi + Bluetooth

In my OpenCore EFI folder, I use AirportItlwm and IntelBluetoothFirmware for macOS Big Sur, if you use another macOS version, check itlwm and IntelBluetoothFirmware pages to see what you have to do. And, if you changed you WiFi / BT card, follow another tutorial like AirPortBrcmFixup one to get it working if needed.

Audio

I use AppleALC with layout-id 21 to fix audio. If you want, you can see all the layout-ids I tried in this file.

Old guide

Intro

First of all, you need to know that a some things will not work on macOS!

This repository contains all the necessary files that I used to Hackintosh my Razer Blade

This guide is based on Razer Blade 15 Advanced 2019 by stonevil and Razer Blade 15 2018 by vettz500 tutorials.

NEW VERSION

I will not explain you how to install macOS because there are a lot of tutorials to do it! I will only explain how to have maximum hardware working after macOS installation

The basic config that I used is config_UHD630.plist by RehabMan

Hardware

What works?

Intel UHD Graphics 630 (with full hardware acceleration using WhateverGreen)
Wifi and Bluetooth (using itlwm and IntelBluetoothFirmware)
Realtek Ethernet card (using RealtekRTL8111)
Integrated speakers + mic and external speakers/headphones + mic on jack port (using AppleALC with layout-id 21 for ALC256 codec)
Battery status (using SMCBatteryManager)
Integrated 720p Webcam
Trackpad (with all gestures using VoodooI2C)
AirDrop and Apple Watch Unlock (After network card upgrade)

What doesn't work?

AirDrop and Apple Watch Unlock with native Intel card (should be replaced with a Broadcom one)
NVIDIA GPU (No drivers for RTX 2060 / GTX 1660)
HDMI / mDP / USB-C to HDMI (They are connected to the NVIDIA GPU - You can use an external USB display using DisplayLink technology or things like this)

Old guide

Fixes

Audio

To fix audio, you will need AppleALC kext by acidanthera

You will need to change your Clover configuration :

Open the config.plist file with a plist editor like Xcode.

Uncomment the layout-id line (In Root > Devices > Properties > PciRoot(0)/Pci(0x1f,3) > layout-id) that is commented by default.

Then set layout-id to 21.

Battery status

You will need to patch your DSDT to get battery status working.

Export ACPI

Reboot computer
In Clover Boot Menu press F2
Select normal macOS boot.

DSDT patching

Mount your EFI partition using Clover Configurator or by typing in a Terminal

sudo diskutil mount EFI

Navigate to folder /Volumes/EFI/EFI/CLOVER/ACPI/.
Copy folder origin to Desktop folder.
Download MaciASL and copy it to /Applications/.
Download iasl.
Unzip iasl.zip if required.
Copy iasl from ~/Downloads/ folder to /usr/bin/ folder with command in Terminal application.

sudo cp ~/Downloads/iasl /usr/bin/
rm ~/Downloads/iasl

Navigate to ~/Desktop/origin/ folder in Terminal application with command cd ~/Desktop/origin/.
Disassembling .aml files with command in Terminal application

iasl -da -dl DSDT.aml SSDT*.aml

Old method (please use the new method)

Run MaciASL application and open file ~/Desktop/origin/DSDT.dsl.
Click Patch button in toolbar.
Copy this patch in the Patch window:

into method label B1B2 remove_entry;

into definitionblock code_regex . insert

begin

Method (B1B2, 2, NotSerialized) { Return(Or(Arg0, ShiftLeft(Arg1, 8))) }\n

end;


into device label EC0 code_regex BIF1,\s+16, replace_matched begin IF10,8,IF11,8, end;

into device label EC0 code_regex BIF2,\s+16, replace_matched begin IF20,8,IF21,8, end;

into device label EC0 code_regex BIF3,\s+16, replace_matched begin IF30,8,IF31,8, end;

into device label EC0 code_regex BIF4,\s+16, replace_matched begin IF40,8,IF41,8, end;


into device label EC0 code_regex BST0,\s+16, replace_matched begin ST00,8,ST01,8, end;

into device label EC0 code_regex BST1,\s+16, replace_matched begin ST10,8,ST11,8, end;

into device label EC0 code_regex BST2,\s+16, replace_matched begin ST20,8,ST21,8, end;

into device label EC0 code_regex BST3,\s+16, replace_matched begin ST30,8,ST31,8, end;


into method label _BIF code_regex \^\^EC0\.BIF1, replaceall_matched begin B1B2(^^EC0.IF10,^^EC0.IF11), end;

into method label _BIF code_regex \^\^EC0\.BIF2, replaceall_matched begin B1B2(^^EC0.IF20,^^EC0.IF21), end;

into method label _BIF code_regex \^\^EC0\.BIF3, replaceall_matched begin B1B2(^^EC0.IF30,^^EC0.IF31), end;

into method label _BIF code_regex \^\^EC0\.BIF4, replaceall_matched begin B1B2(^^EC0.IF40,^^EC0.IF41), end;


into method label _BST code_regex \^\^EC0\.BST0, replaceall_matched begin B1B2(^^EC0.ST00,^^EC0.ST01), end;

into method label _BST code_regex \^\^EC0\.BST1, replaceall_matched begin B1B2(^^EC0.ST10,^^EC0.ST11), end;

into method label _BST code_regex \^\^EC0\.BST2, replaceall_matched begin B1B2(^^EC0.ST20,^^EC0.ST21), end;

into method label _BST code_regex \^\^EC0\.BST3, replaceall_matched begin B1B2(^^EC0.ST30,^^EC0.ST31), end;


# added for Razer Blade 15 (2018), per JomanJi

into device label EC0 code_regex BIF0,\s+16, replace_matched begin IF00,8,IF01,8, end;

into method label _BIF code_regex \(\^\^EC0.BIF0, replaceall_matched begin (B1B2(\^\^EC0.IF00,\^\^EC0.IF01), end;


# utility methods to read/write buffers from/to EC

into method label RE1B parent_label EC0 remove_entry;

into method label RECB parent_label EC0 remove_entry;

into device label EC0 insert

begin

Method (RE1B, 1, NotSerialized)\n

{\n

OperationRegion(ERAM, EmbeddedControl, Arg0, 1)\n

Field(ERAM, ByteAcc, NoLock, Preserve) { BYTE, 8 }\n

Return(BYTE)\n

}\n

Method (RECB, 2, Serialized)\n

// Arg0 - offset in bytes from zero-based EC\n

// Arg1 - size of buffer in bits\n

{\n

ShiftRight(Add(Arg1,7), 3, Arg1)\n

Name(TEMP, Buffer(Arg1) { })\n

Add(Arg0, Arg1, Arg1)\n

Store(0, Local0)\n

While (LLess(Arg0, Arg1))\n

{\n

Store(RE1B(Arg0), Index(TEMP, Local0))\n

Increment(Arg0)\n

Increment(Local0)\n

}\n

Return(TEMP)\n

}\n

end;


# buffer fields

into device label EC0 code_regex (ECCM,)\s+(256) replace_matched begin ECCX,%2,//%1%2 end;

into method label _BIF code_regex \(\^\^EC0.ECCM, replaceall_matched begin (^^EC0.RECB(0x60,256), end;

Apply the Patch
Save the file as ACPI Machine Language Binary
Copy your new DSDT.aml to /Volumes/EFI/EFI/CLOVER/ACPI/patched/
Copy the ACPIBatteryManager kext to /Volumes/EFI/EFI/CLOVER/kexts/Other.
That's done, now reboot and it will work!

New Method

Sometimes, the ACPIBatteryManager can cause bugs! I suggest you to replace it by VirtualSMC and its SMCBatteryManager extension.

Remove ACPIBatteryManager.kext if you have it.
Put VirtualSMC and SMCBatteryManager kexts in your kexts folder.
Open your DSDT file with MaciASL
Click Patch button in toolbar.
Now navigate and select Razer Blade (2014) in the patches list.
Click on Apply
Close the Patch window.
Save the file as ACPI Machine Language Binary
Copy your new DSDT.aml to /Volumes/EFI/EFI/CLOVER/ACPI/patched/
That's done, now reboot and it will work!

Wifi / Bluetooth (After upgrading network card)

Just download AirPortBrcmFixup and BrcmPatchRAM
Then copy AirPortBrcmFixup, BrcmFirmwareData, BrcmNonPatchRAM2 and BrcmPatchRAM2 kexts to /Volumes/EFI/EFI/CLOVER/kexts/Other/.
Now reboot and if you have a compatible network card Wifi and Bluetooth will work!
DON'T DO THIS IF YOU DON'T HAVE UPGRADED YOUR WIFI/BLUETOOTH CARD!!!

Integrated graphics

Download Lilu and WhateverGreen kexts.
Copy them in /Volumes/EFI/EFI/CLOVER/kexts/Other/.
Now reboot and Full graphics acceleration will work

Ethernet

Download RealtekRTL8111 kext.
Place it in /Volumes/EFI/EFI/CLOVER/kexts/Other/.
Now reboot and Ethernet will work

Trackpad

Download VoodooI2C kext.
Place VoodooI2C and VoodooI2CHID in /Volumes/EFI/EFI/CLOVER/kexts/Other/.
Open your DSDT file in MaciASL
Click Patch button in toolbar.
Select the [Windows] Windows 10 Patch in _VoodooI2C-Patches
Click Apply
Then copy this patch in the Patch window:

into method label _STA parent_label GPI0 replace_content begin

Return (0x0F)

end;

Then find this code in Device (TPD0) in Scope (_SB.PCI0.I2C1):

Name (SBFG, ResourceTemplate ()
   {
       GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
           "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
           )
           {   // Pin list
               0x0000
           }
   })

And replace by this:

Name (SBFG, ResourceTemplate ()
   {
       GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
           "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
           )
           {   // Pin list
               0x00A2
           }
   })

Then close the Patch window
Save the file as ACPI Machine Language Binary
Copy your new DSDT.aml to /Volumes/EFI/EFI/CLOVER/ACPI/patched/
Now open your CLOVER config.plist file with a plist editor like Xcode
Go to Kernel and Kexts patches > ForceKextsToLoad
Add a string with value \System\Library\Extensions\IOGraphicsFamily.kext
Now reboot and the trackpad will fully work

Caps Lock light

Install Karabiner-Elements
Enable Manipulate LED for Razer Blade (Razer) in Devices section

Keyboard backlight control

There are two ways to control your Razer Keyboard. You can use the command line tool or the app

GUI

You can use the Razer macOS app by 1kc that allow you to change your Razer Keyboard color from the taskbar
Just download it and put it in your /Applications folder.

Command Line Tool

Just download my fork of osx-razer-blade if you want to compile it with Xcode or just use the command line tool: osx-razer-led
For example, if you want the keyboard to be white and stay static, just type:

osx-razer-led static white

iMessage / FaceTime

To enable iMessage and FaceTime you can follow this guide

Cheap and reliable Node.js hosting starts at $3/month, and $1/month static HTML hosting

DocSystem / razerbladehackintosh

Programming Languages

Labels

Projects that are alternatives of or similar to razerbladehackintosh

Razer Blade 15 Base Model Hackintosh

Intro

NEW VERSION

Hardware

What works?

What doesn't work?

Fixes

WiFi + Bluetooth

Audio

Old guide

Intro

NEW VERSION

Hardware

What works?

What doesn't work?

Old guide

Fixes

Audio

Battery status

Export ACPI

DSDT patching

Old method (please use the new method)

New Method

Wifi / Bluetooth (After upgrading network card)

Integrated graphics

Ethernet

Trackpad

Caps Lock light

Keyboard backlight control

GUI

Command Line Tool

iMessage / FaceTime