SparkFun Rotary Encoder Breakout - Illuminated (RG/RGB)
SparkFun Rotary Encoder Breakout - Illuminated (RG/RGB) (BOB-11722)
This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a footprint for the R/G version!
Repository Contents
- /Firmware - Example for the RGB and RG Rotary Encoders
- /Hardware - Eagle design files (.brd, .sch)
- /Libraries - Archived library of the PinChangeInt used for the example code
Documentation
- Installing an Arduino Library Guide - Basic information on how to install an Arduino library. You will need to manually install the PinChangeInt Arduino library.
- SparkFun Fritzing repo - Fritzing diagrams for SparkFun products.
- SparkFun 3D Model repo - 3D models of SparkFun products.
Product Versions
Compatible with the following rotary encoders:
- COM-15141 - RGB rotary encoder - illuminated; buttons and LEDs are common cathode
- COM-15140 - RG rotary encoder - illuminated, buttons and LEDs are common anode
- COM-10982 (retired) - RGB rotary encoder - illuminated; buttons and LEDs are common cathode
- COM-10596 (retired) - RG rotary encoder - illuminated, buttons and LEDs are common anode
License Information
This product is open source!
The hardware is released under Creative Commons ShareAlike 4.0 International.
Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.