Alternatives and detailed information of scaleway-terraform-demo

Terraform is a cloud agnostic automation tool to safely and efficiently manage infrastructure as the configuration is evolved. In its latest version, Terraform ships Scaleway support which make it a great tool to version and continuously develop your Scaleway infrastructure with ease.

In this blog post I showcase Terraform new capabilities by setting up a small Web App using Consul, Nomad and Fabio.

Consul is a tool for service discovery and configuration. Consul is distributed, highly available, and extremely scalable.
Nomad is a distributed scheduler which allows to run arbitrary tasks and ensure that services are always running and take care of dynamic re-allocation if instances are unavailable.
Fabio is a fast, modern, zero-conf load balancing HTTP router for deploying applications managed by consul.

Requirements

I assume you have Terraform >= v0.7.0 installed and have a Scaleway account. If not, you can sign-up in seconds here.

First, set the following environmental variables to allow Terraform to interact with the Scaleway APIs:

export SCALEWAY_ACCESS_KEY=<your-access-key> 
export SCALEWAY_ORGANIZATION=<your-organization-key>

Exporting environmental variables lets you run Terraform without specifying any credentials in the configuration file:

# main.tf
provider "scaleway" {}

Preparations

I use a jump host, so my Consul cluster instances are not publicly accessible and setup a security group to disable external requests to the Nomad cluster. Nomad uses ports 4646, 4647 and 4648 for HTTP, RPC and Serf.

The following configuration create a security group that allows internal traffic and drop inbound traffic on Nomad ports:

# modules/security_group/main.tf
resource "scaleway_security_group" "cluster" {
  name        = "cluster"
  description = "cluster-sg"
}

resource "scaleway_security_group_rule" "accept-internal" {
  security_group = "${scaleway_security_group.cluster.id}"

  action    = "accept"
  direction = "inbound"

  # NOTE this is just a guess - might not work for you.
  ip_range = "10.1.0.0/16"
  protocol = "TCP"
  port     = "${element(var.nomad_ports, count.index)}"
  count    = "${length(var.nomad_ports)}"
}

resource "scaleway_security_group_rule" "drop-external" {
  security_group = "${scaleway_security_group.cluster.id}"

  action    = "drop"
  direction = "inbound"
  ip_range  = "0.0.0.0/0"
  protocol  = "TCP"

  port  = "${element(var.nomad_ports, count.index)}"
  count = "${length(var.nomad_ports)}"

  depends_on = ["scaleway_security_group_rule.accept-internal"]
}

Our network is no longer publicly accessible, we can start setting up the jump host:

# modules/jump_host/main.tf
resource "scaleway_server" "jump_host" {
  name                = "jump_host"
  image               = "${var.image}"
  type                = "${var.type}"
  dynamic_ip_required = true

  tags = ["jump_host"]

  security_group = "${var.security_group}"
}

resource "scaleway_ip" "jump_host" {
  server = "${scaleway_server.jump_host.id}"
}

output "public_ip" {
  value = "${scaleway_ip.jump_host.ip}"
}

I'm using the official scaleway scw tool to lookup image ids used in the scaleway_server image parameter

As you can see above, I'm using the scaleway_ip resource to request a public IP which can outlive the instance it's attached to. This way you can re-create the jump host without loosing the public IP you're using.

We'll be using our jump host module like this:

# main.tf
provider "scaleway" {}

module "security_group" {
  source = "./modules/security_group"
}

module "jump_host" {
  source = "./modules/jump_host"

  security_group = "${module.security_group.id}"
}

Next, let's setup our consul clusters.

Setting up Consul

First, the core of our setup is the scaleway_server resource. To slightly simplify the setup I use Ubuntu 16.04 and systemd. The server image & commercial type have been moved into a separate variables file. Lastly, we have to modify the install.sh script to install the official consul ARM binary:

# modules/consul/main.tf
resource "scaleway_server" "server" {
  count               = "${var.server_count}"
  name                = "consul-${count.index + 1}"
  image               = "${var.image}"
  type                = "${var.type}"
  dynamic_ip_required = false

  tags = ["consul"]

  connection {
    type         = "ssh"
    user         = "root"
    host         = "${self.private_ip}"
    bastion_host = "${var.bastion_host}"
    bastion_user = "root"
    agent        = true
  }

  provisioner "local-exec" {
    command = "curl -L -o /tmp/consul_0.6.4_amd64.zip https://releases.hashicorp.com/consul/0.6.4/consul_0.6.4_linux_amd64.zip"
  }

  provisioner "local-exec" {
    command = "curl -L -o /tmp/consul_0.6.4_arm.zip https://releases.hashicorp.com/consul/0.6.4/consul_0.6.4_linux_arm.zip"
  }

  provisioner "file" {
    source      = "/tmp/consul_0.6.4_amd64.zip"
    destination = "/tmp/consul_0.6.4_amd64.zip"
  }

  provisioner "file" {
    source      = "/tmp/consul_0.6.4_arm.zip"
    destination = "/tmp/consul_0.6.4_arm.zip"
  }

  provisioner "file" {
    source      = "${path.module}/scripts/rhel_system.service"
    destination = "/tmp/consul.service"
  }

  provisioner "remote-exec" {
    inline = [
      "echo ${var.server_count} > /tmp/consul-server-count",
      "echo ${scaleway_server.server.0.private_ip} > /tmp/consul-server-addr",
    ]
  }

  provisioner "remote-exec" {
    scripts = [
      "${path.module}/scripts/install.sh",
      "${path.module}/scripts/service.sh",
    ]
  }
}

To accommodate the bundled installation scripts, I packaged the entire setup into one terraform module called consul.

Since the host is not publicly accessible I have to work around releases.hashicorp.com not being accessible. This is easily fixed by downloading the necessary archives first, and then copying them over via scp.

Note that I use the connection attribute to instruct terraform to use the jump host I created previously to connect to any consul instance.

Now, lets use our new consul module:

# main.tf
provider "scaleway" {}

module "security_group" {
  source = "./modules/security_group"
}

module "jump_host" {
  source = "./modules/jump_host"

  security_group = "${module.security_group.id}"
}

module "consul" {
  source = "./modules/consul"

  security_group = "${module.security_group.id}"
  bastion_host   = "${module.jump_host.public_ip}"
}

To run the consul cluster, I have to run the following Terraform commands:

$ terraform get       # tell terraform to lookup referenced consul module 
$ terraform apply

This operation can take a few minutes. Once done, I verify that the cluster consists of two servers. I first have to find out the public IP of our jumphost:

$ terraform output -module=jump_host
  public_ip = 212.47.227.252

Next, let's lookup the private IPs of the consul servers, and query the member list:

$ terraform output -module=nomad
private_ips = [
    [
        10.1.40.120,
        10.1.17.22
    ]
]
public_ips = [
    [
        163.172.163.127,
        163.172.164.126
    ]
]
$ ssh [email protected] -A 'ssh [email protected] consul members -rpc-addr=10.1.40.120:8400'
Node      Address           Status  Type    Build  Protocol  DC
consul-1  10.1.40.120:8301  alive   server  0.6.4  2         dc1
consul-2  10.1.17.22:8301   alive   server  0.6.4  2         dc1

Note that it doesn't matter which server we talk to.

Setting up nomad

The basic Nomad setup is very similar to the consul setup. I use Ubuntu 16.04 as base image; Nomad will be supervised by systemd. The notable differences are:

The nomad configuration file is generated inline
Nomad will use the existing consul cluster to bootstrap itself

resource "scaleway_server" "server" {
  count               = "${var.server_count}"
  name                = "nomad-${count.index + 1}"
  image               = "${var.image}"
  type                = "${var.type}"
  dynamic_ip_required = true
  tags                = ["cluster"]

  provisioner "file" {
    source      = "${path.module}/scripts/rhel_system.service"
    destination = "/tmp/nomad.service"
  }

  provisioner "file" {
    source      = "${path.module}/scripts/nomad_v0.4_linux_arm"
    destination = "/usr/local/bin/nomad"
  }

  provisioner "remote-exec" {
    inline = <<CMD
cat > /tmp/server.hcl <<EOF
datacenter = "dc1"

bind_addr = "${self.private_ip}"

advertise {
  # We need to specify our host's IP because we can't
  # advertise 0.0.0.0 to other nodes in our cluster.
  serf = "${self.private_ip}:4648"
  rpc = "${self.private_ip}:4647"
  http= "${self.private_ip}:4646"
}

# connect to consul for cluster management
consul {
  address = "${var.consul_cluster_ip}:8500"
}

# every node will be running as server as well as client…
server {
  enabled = true
  # … but only one node bootstraps the cluster
  bootstrap_expect = ${element(split(",", "1,0"), signum(count.index))}
}

client {
  enabled = true

  # enable raw_exec driver. explanation will follow
  options = {
    "driver.raw_exec.enable" = "1"
  }
}
EOF
CMD
  }

  provisioner "remote-exec" {
    scripts = [
      "${path.module}/scripts/install.sh",
      "${path.module}/scripts/service.sh"
    ]
  }
}

Here again, I've extract this into a module to bundle both the binary and the required scripts.

Our main terraform file hides the entire setup complexity for us:

# main.tf
provider "scaleway" {}

module "security_group" {
  source = "./modules/security_group"
}

module "consul" {
  source = "./modules/consul"

  security_group = "${module.security_group.id}"
}

module "nomad" {
  source = "./modules/nomad"

  consul_cluster_ip = "${module.consul.server_ip}"
  security_group    = "${module.security_group.id}"
}

To run the Nomad cluster, I use the following Terraform commands:

$ terraform get    # tell terraform to lookup referenced consul module 
$ terraform plan   # we should see two new nomad servers
$ terraform apply

This operation can take a few minutes. Once the operation completed, I verify the setup. I should see two nomad nodes, where one node is marked as leader:

$ ssh [email protected] 'nomad server-members -address=http://10.1.38.33:4646'
Name            Address     Port  Status  Leader  Protocol  Build  Datacenter  Region
nomad-1.global  10.1.36.94  4648  alive   false   2         0.4.0  dc1         global
nomad-2.global  10.1.38.33  4648  alive   true    2         0.4.0  dc1         global

I also verify that nomad registered with the Consul cluster:

$ ssh [email protected] 'curl -s 10.1.42.50:8500/v1/catalog/services' | jq 'keys'
[
  'consul',
  'nomad',
  'nomad-client'
]

The command above result looks good as I can see consul, nomad and nomad-client listed in the output.

Before we proceed we need to verify that the ARM binary of nomad properly reports resources, otherwise we can't schedule jobs in our cluster:

$ ssh [email protected] 'nomad node-status -self -address=http://10.1.38.151:4646'
ID     = c8c8a567
Name   = nomad-1
Class  = <none>
DC     = dc1
Drain  = false
Status = ready
Uptime = 4m55s

Allocated Resources
CPU        Memory       Disk        IOPS
0/5332000  0 B/2.0 GiB  0 B/16 EiB  0/0

Allocation Resource Utilization
CPU        Memory
0/5332000  0 B/2.0 GiB

Host Resource Utilization
CPU             Memory           Disk
844805/5332000  354 MiB/2.0 GiB  749 MiB/46 GiB

Everything is looking great. Let's run some software!

Running fabio

Fabio is a reserve proxy open sourced by ebay which supports consul out of the box. This is great because it will take care to route traffic internally to the correct node which runs a specific service.

Since there are also no prebuild ARM binaries available I've also included a compiled binary for this in the repository. The fabio compilation process is pretty much the same for nomad; see above.

Now that we have an ARM binary we need to schedule fabio on every nomad node. This can be done easily using nomads system type.

Please note that you have to modify the nomad/fabio.nomad file slightly, entering a nomad cluster ip:

# nomad/fabio.nomad
job "fabio" {
  datacenters = ["dc1"]

  # run on every nomad node
  type = "system"

  update {
    stagger = "5s"
    max_parallel = 1
  }

  group "fabio" {
    task "fabio" {
      driver = "raw_exec"

      config {
        command = "fabio_v1.2_linux_arm"
        # replace 10.1.42.50 with an IP from your cluster!
        args = ["-proxy.addr=:80", "-registry.consul.addr", "10.1.42.50:8500", "-ui.addr=:9999"]
      }

      artifact {
        source = "https://github.com/nicolai86/scaleway-terraform-demo/raw/master/binaries/fabio_v1.2_linux_arm"

        options {
          checksum = "md5:9cea33d5531a4948706f53b0e16283d5"
        }
      }

      resources {
        cpu = 20
        memory = 64
        network {
          mbits = 1

          port "http" {
            static = 80
          }
          port "ui" {
            static = 9999
          }
        }
      }
    }
  }
}

We're not running consul locally on every nomad node so we have to specify -registry.consul.addr. Please replace the IP 10.1.42.50 with any IP from your consul cluster. We could get around this manual manipulation e.g. by using envconsul or installing consul on every nomad node and using DNS.

Anyway, let's use nomad to run fabio on every node:

$ nomad run -address=http://163.172.171.232:4646 nomad/fabio.nomad
==> Monitoring evaluation "7116f4b8"
    Evaluation triggered by job "fabio"
    Allocation "1ae8159c" created: node "c8c8a567", group "fabio"
    Evaluation status changed: "pending" -> "complete"
==> Evaluation "7116f4b8" finished with status "complete"

Fabio should have self registered with consul, let's verify that:

$ ssh [email protected] 'curl -s 163.172.157.49:8500/v1/catalog/services' | jq 'keys'
[
  'consul',
  'nomad',
  'nomad-client',
  'fabio'
]

Great! Now we need to run some applications on our fresh cluster:

Is go 1.7 out yet?

I've taken the is go 1.2 out yet API and adjusted it to check for go 1.7 instead of go 1.2.

To allow fabio to pick up our app we need to include a service definition. I'll be using one of my domains for this, randschau.eu.

service {
  name = "isgo17outyet"
  tags = ["urlprefix-isgo17outyet.randschau.eu/"]
  port = "http"
  check {
    type = "http"
    name = "health"
    interval = "15s"
    timeout = "5s"
    path = "/"
  }
}

See the nomad directory for the complete isgo17outyet.nomad file.

$ nomad run -address=http://163.172.171.232:4646 -verbose nomad/isgooutyet.nomad
==> Monitoring evaluation "4c8ca49f-32a3-db17-92a0-d19f1ca8e3e8"
    Evaluation triggered by job "isgo17outyet"
    Allocation "29036d82-7cc6-6742-8db9-176fe83a7a3a" created: node "c8c8a567-a59b-b322-6428-7d6dc66af8d9", group "isgo17outyet"
    Evaluation status changed: "pending" -> "complete"
==> Evaluation "4c8ca49f-32a3-db17-92a0-d19f1ca8e3e8" finished with status "complete"

We can verify that our app is actually healthy by checking the consul health checks:

$ ssh [email protected] 'curl 163.172.157.49:8500/v1/health/checks/isgo17outyet' | jq
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   298  100   298    0     0   2967      0 --:--:-- --:--:-- --:--:--  2980
[
  {
    "Node": "consul-1",
    "CheckID": "66d7110ca9d9d844415a26592fbb872888895021",
    "Name": "health",
    "Status": "passing",
    "Notes": "",
    "Output": "",
    "ServiceID": "_nomad-executor-29036d82-7cc6-6742-8db9-176fe83a7a3a-isgo17outyet-isgo17outyet-urlprefix-isgo17outyet.randschau.eu/",
    "ServiceName": "isgo17outyet",
    "CreateIndex": 187,
    "ModifyIndex": 188
  }
]

Now we can setup DNS routing to any nomad node to be able to access our new API. For now we'll just verify it's working by setting appropriate request headers:

$  curl -v -H 'Host: isgo17outyet.randschau.eu' 163.172.171.232
*   Trying 163.172.171.232...
* Connected to 163.172.171.232 (163.172.171.232) port 9999 (#0)
> GET / HTTP/1.1
> Host: isgo17outyet.randschau.eu
> User-Agent: curl/7.43.0
> Accept: */*
>
< HTTP/1.1 200 OK
< Content-Length: 120
< Content-Type: text/html; charset=utf-8
< Date: Sat, 23 Jul 2016 11:46:17 GMT
<

<!DOCTYPE html><html><body><center>
  <h2>Is Go 1.7 out yet?</h2>
  <h1>

    No.

  </h1>
</center></body></html>
* Connection #0 to host 163.172.171.232 left intact

closing thoughts

This was just a demo on how to use the new Scaleway provider with terraform.

We've skipped over using scaleway_volume & scaleway_volume_attachment to persist data over servers, and will leave this for another time.

That's it for now. Happy hacking : )

Cheap and reliable Node.js hosting starts at $3/month, and $1/month static HTML hosting

nicolai86 / scaleway-terraform-demo

Programming Languages

Labels