Table of contents
1. Introduction
2. Build instructions
2.1 Building on Ubuntu 16.04, Debian 8 and Debian 9
2.2 Building on Arch Linux
2.3 Building on Raspbian
3. Running and configuring IRATI
3.1 Loading the kernel modules
3.2 The configuration files
3.3 Running the IPC Manager Daemon
4. The simple Manager application
5. Tutorials
6. Overview of the software components
1. Introduction
IRATI is an open source implementation of the RINA architecture targeted to the OS/Linux system, initially developed by the FP7-IRATI project (for information about RINA please visit http://pouzinsociety.org). This README file and the following wiki pages provide information on using IRATI and understanding its design:
- Software Architecture Overview: Explanation of the different components of IRATI. See https://github.com/IRATI/stack/wiki/Software-architecture-overview.
- Getting Started: How to install and run IRATI. See https://github.com/IRATI/stack/wiki/Getting-Started
- IRATI in depth: Detailed explanation of how specific aspects of the IRATI implementation work. See https://github.com/IRATI/stack/wiki/IRATI-in-depth
- Tutorials: Step-by-step experimentation scenarios. See https://github.com/IRATI/stack/wiki/Tutorials
A public mailing list, is available here: http://www.freelists.org/list/irati. The list is to be used as a means for communication with the IRATI open source development community.
The current implementation is mature enough to allow small/mid scale experimentation (up to 50-70 systems, with each system having up to 10 IPC Processes instantiated), during relatively short periods of time (hours, up to a day depending on the experiment tested). We are working on improving the stability and robustness of IRATI in future releases.
2. Build instructions
Build Status of the Master branch on Debian via Gitlab Runner.
Build Status of arcfire branch on Debian via Gitlab Runner.
Build Status of the Master branch on Ubuntu via Travis CI.
Build Status of arcfire branch on Ubuntu via Travis CI.
2.1. Building on Ubuntu 16.04, Debian 8 and Debian 9
NOTE for Debian 8: For the kernel modules, a Linux kernel with a version between 4.1 and 4.9 (included) has to be installed in the system, with the kernel headers. Ubuntu 16.04 already comes with Linux kernel 4.4, therefore no new kernel needs to be installed.
Once this is done, please install user-space dependencies
$ apt-get update
$ apt-get install autoconf automake libtool pkg-config git g++ libssl-dev protobuf-compiler libprotobuf-dev socat python linux-headers-$(uname -r)
$ apt-get install hostapd (if the system will be configured as an access point)
$ apt-get install wpasupplicant (if the system will be configured as a mobile host)
Download the IRATI repo and enter the root directory
$ git clone https://github.com/IRATI/stack.git
$ cd stack
Build and install both kernel-space and user-space software
$ sudo ./configure --prefix <path to IRATI installation folder>
$ sudo make install
(sudo is not necessary in the ./configure phase if the current user has
write permissions on the directory specified with --prefix).
2.2. Building on Arch Linux
Install user-space dependencies
$ pacman -S autoconf automake autoconf libtool pkg-config git openssl protobuf socat python linux-headers
$ pacman -S hostapd (if the system will be configured as an access point)
$ pacman -S wpa_supplicant (if the system will be configured as a mobile host)
Download the IRATI repo and enter the root directory
$ git clone https://github.com/IRATI/stack.git
$ cd stack
Build and install both kernel-space and user-space software
$ sudo ./configure --prefix <path to IRATI installation folder>
$ sudo make install
(sudo is not necessary in the ./configure phase if the current user has
write permissions on the directory specified with --prefix).
2.3. Building on Raspbian
(Tested with Raspberry Pi model 3B)
Insert the SD card into the Raspberry Pi and power it on. Log in with user 'pi' and password 'raspberry'. As root ("sudo su -" or equivalent):
Check your kernel version (via uname -r), if it is not at least 4.9.24-v7+, update the distro
$ apt-get update
$ apt-get dist-upgrade
$ reboot
Install dependencies
$ apt-get install raspberrypi-kernel-headers socat
$ apt-get install hostapd (if the system will be configured as an access point)
$ apt-get install wpa-supplicant (if the system will be configured as a mobile host)
$ apt-get install autoconf libtool git libssl-dev protobuf-compiler libprotobuf-dev
Download the IRATI repo and enter the root directory
$ git clone https://github.com/IRATI/stack.git
$ cd stack
Build and install both kernel-space and user-space software
$ sudo ./configure --prefix <path to IRATI installation folder>
$ sudo make install
(sudo is not necessary in the ./configure phase if the current user has
write permissions on the directory specified with --prefix).
3. Running and configuring IRATI
3.1. Loading the required Kernel modules
To load the IRATI kernel modules, just call the load-rina-modules script:
$ ./load-irati-modules
Next, the IPC Manager (IPCM) has to be started in userspace, which is the local management agent. The IPCM needs some configuration information.
3.2 The IPC Manager configuration files
3.2.1 Main configuration file
The main configuration file is located in your INSTALLATION_PATH/etc/ipcmanager.conf. It contains
instructions to optionally instantiate and configure a number of IPC Processes when the IPC Manager
Daemon starts its execution.
Local configuration. The first part of the configuration file contains the settings for IRATI, such as the paths to the UNIX socket for the local console or the paths where to search for user-space or kernel plugins. It also specifies the system name, which is later used to auto-generate the names of the IPC Processes instantiated in this system.
"configFileVersion" : "1.4.1",
"localConfiguration" : {
"installationPath" : "/usr/bin",
"libraryPath" : "/usr/lib",
"logPath" : "/var/log",
"consoleSocket" : "/var/run/ipcm-console.sock",
"system-name" : "pe1",
"pluginsPaths" : ["/usr/lib/rinad/ipcp"]
},
IPC Processes to create. The next section specifies which IPC processes should be created. It requires for each IPC process the type, which can be either a normal IPC process, or a certain shim IPC process. The names of the IPCPs will be generated from the system name and the DIF name. The name of the DIF(s) where the IPC process should register with is also supplied. If peer discovery is configured, the IPCP will try to enroll to the DIF it has been assigned to via the N-1 DIF whose name has been specified at the "n1difPeerDiscovery" parameter. Otherwise enrollment will have to be done manually from the local management console.
"ipcProcessesToCreate" : [ {
"type" : "shim-eth-vlan",
"difName" : "110"
}, {
"type" : "normal-ipc",
"difName" : "normal.DIF",
"difsToRegisterAt" : ["110"],
"n1difPeerDiscovery" : ["110"]
} ],
DIF Configurations. This only specifies what DIFs to create, but it does not yet explain how the DIFs should be configured. Thats why there is a section called difConfigurations, which specifies what is the DIF template file for each of the DIF names in the main configuration file (the same template file can be used for multiple DIFs). DIF template files contain the actual configuration of the DIF, including its policies.
"difConfigurations" : [ {
"name" : "110",
"template" : "shim-eth-vlan.dif"
}, {
"name" : "normal.DIF",
"template" : "default.dif"
} ]
Addons. The IPC Manager Daemon functionality can be augmented through the "addons" framework. Addons can get access to the events processed by the main IPC Manager control loop, and react accordingly. Right now there are five addons avaiable: i) the IPC Manager console, ii) the initial scripting engine (which bootstraps the system based on the IPCM configuration file), iii) the Management Agent, iv) the DIF Allocator and v) the Mobility Manager. The first two do not require any special configuraiton, while the other three can be configured via the main configuration file, as explained in the following subsections.
3.2.1.1 DIF Allocator
Applications deployed on a RINA network can be accessed through any layer that provides enough QoS and scope. This is different from current networks, in which applications are only reachable through the topmost IP layer. RINA incorporates infrastructure for application registration and discovery within a layer (distributed application directories that map registered application names to IPC Process addresses are part of all layers) as well as across layers. The DIF Allocator is the component that enables application discovery across layers. It has two main functions: i) maintaining a distributed mapping of registered application names to the names of the DIFs where they are registered and ii) collaborating with management systems to dynamically create or extend layers as part of flow allocation requests. Right now IRATI is equipped with two DIF Allocator implementations: a static one, that only selects which DIF to use for a certain destination application name (DIFs must exist before) and a more dynamic one.
Static DIF Allocator. This is the default DIF Allocator implementation, only used to select a specific DIF to register an application name or to allocate a flow to a destination application name. The DIF must already exist, the static DIF Allocator is not able to trigger instantiation of new DIFs. Since this is the default DIF Allocator implementation used, no configuration needs to be specified in the main IPCM configuration file. The application name to DIF mappings are specified in the da.map file, located at the IRATI installation path/etc folder. The file can be updated while IPC Manager Daemon is running, and the static DIF Allocator implementation will update its internal mappings. If no mapping is provided by a certain application, it will try to randomly select a normal DIF first; if there is non available a shim DIF and if there is none it will fail.
"applicationToDIFMappings": [
{
"encodedAppName": "rina.apps.echotime.server-1--",
"difName": "dcfabric.DIF"
},
{
"encodedAppName": "rina.apps.echotime.client-1--",
"difName": "dcfabric.DIF"
},
{
"encodedAppName": "rina.apps.echotime-2--",
"difName": "vpn1.DIF"
},
{
"encodedAppName": "rina.apps.echotime.client-2--",
"difName": "vpn1.DIF"
}
],
Dynamic DIF Allocator. The Dynamic DIF Allocator implementation is capable of dynamically discovering application to DIF mappings across any set of DIFs, and to collaborate with the local IPC Manager Daemon to create new IPC Processes and make them join a DIF through one of the N-1 DIFs available at the system. You can read ARCFIRE's D3.2 pages 12-20 for a full description of the implementation (http://ict-arcfire.eu/index.php/research/deliverables/), and an example of its usage is provided in the IRATI tutorial 9 (https://github.com/IRATI/stack/wiki/Tutorial-9:-DMM-app-discovery-ARCFIRE-2018). The Dynamic DIF Allocator is configured in the following way (in the main IPCM configuration file):
"difallocator" : {
"type" : "dynamic-dif-allocator",
"dafName" : {
"processName" : "name of the DIF Allocator DAF"
},
"dapName" : {
"processName" : "process name of the DIF Allocator instance",
"processInstance" : "process instance of the DIF Allocator instance"
},
"joinableDIFs" : [ {
"difName" : "Name of the DIF that can be joined",
"ipcpPn" : "Process name of the IPCP to be created",
"ipcpPi" : "Process instance of the IPCP to be created"
}, {
...
}],
"enrollments" : [ {
"processName" : "neighbor DA instance process name",
"processInstance" : "neighbor DA instance process instance",
"difName" : "supporting DIF name"
},{
...
}]
}
Below there is an example of such configuration. The DIF allocator daf name is called da.default, the the process name/instance of the instantiation of the DIF Allocator process are da-text1.system and 1 respectively. The DIF Allocator instance can create an IPC Process that belongs to the vpn.DIF, and such IPCP (when created) will have an application name/instance test1.vpn and 1 respectively. Last but not least, the DIF Allocator instance will try to enroll to another DIF Allocator instance called dat-test2.system over the normal.DIF
"addons" : {
"difallocator" : {
"type" : "dynamic-dif-allocator",
"dafName" : {
"processName" : "da.default"
},
"dapName" : {
"processName" : "da-test1.system",
"processInstance" : "1"
},
"joinableDIFs" : [ {
"difName" : "vpn.DIF",
"ipcpPn" : "test1.vpn",
"ipcpPi" : "1"
} ],
"enrollments" : [ {
"processName" : "da-test2.system",
"processInstance" : "1",
"difName" : "normal.DIF"
} ]
}
}
3.2.1.2 Management Agent
The Management Agent enables remote management of IPC within a system. The Management Agent is designed to enroll to a Manager Process in the Network Management DAF (NM-DAF), which will trigger the creation/destruction/re-configuration of IPCPs remotely. The Management Agent can be configured the following way:
"addons" : {
"mad" : {
"managerConnections" : [ {
"managerAppName" : "arcfire.network.manager-1--",
"DIF" : "normal.DIF"
} ]
}
}
The MA is an add-on that needs to be configured with one or more "managerConnections" (one for each application connection that the MA will create to a Manager, typically only one). For each "managerConnection", the MA needs to be configured with the Manager application name and with a DIF that can be used to reach the Manager process.
3.2.1.3 Mobility Manager
Documentation coming soon.
3.2.2 DIF Template configuration files
DIF template files contain the configuration of the components of a DIF. There is a mandatory DIF template called "default.dif" (which gets installed during the IRATI installation procedure), all other DIF templates extend from it (in the sense that they only need to define the JSON sections that are different from the default.dif file). All DIF templates have to be located in the same folder as the main configuration files (.conf) that use the templates.
For exmples of different JSON configuration files, you can take a look at https://github.com/IRATI/stack/tree/master/tests/conf.
3.2.2.1 Data Transfer Constants
Customize the length of the header fields in EFCP data transfer (address, cep-id, length, port-id, sequence number, qos-id) and control (rate, frame, control seq. number) PDUs. Set the maximum PDU size and maximum PDU lifetime for the DIF.
"dataTransferConstants" : {
"addressLength" : 2,
"cepIdLength" : 2,
"lengthLength" : 2,
"portIdLength" : 2,
"qosIdLength" : 2,
"rateLength" : 4,
"frameLength" : 4,
"sequenceNumberLength" : 4,
"ctrlSequenceNumberLength" : 4,
"maxPduSize" : 1470,
"maxPduLifetime" : 60000
},
3.2.2.2 QoS Cubes
Define what are the characteristics of the different QoS cube supported by the DIF, as well as their associated EFCP policies: DTP policy set (data transfer policy set) and DTCP policy set (data transfer policy set).
"qosCubes" : [ {
"name" : "unreliablewithflowcontrol",
"id" : 1,
"partialDelivery" : false,
"orderedDelivery" : true,
"efcpPolicies" : {
"dtpPolicySet" : {
"name" : "default",
"version" : "0"
},
"initialATimer" : 300,
"dtcpPresent" : true,
"dtcpConfiguration" : {
"dtcpPolicySet" : {
"name" : "default",
"version" : "0"
},
"rtxControl" : false,
"flowControl" : true,
"flowControlConfig" : {
"rateBased" : false,
"windowBased" : true,
"windowBasedConfig" : {
"maxClosedWindowQueueLength" : 50,
"initialCredit" : 50
}
}
}
}
}, {
"name" : "reliablewithflowcontrol",
...
} ]
- Name: the name of the qos cube (a string)
- id: the id of the qos cube (an unsigned integer)
- partialDelivery: true/false depending if delivery of partial SDUs is supported
- orderedDelivery: true/false depending if in order delivery of SDUs is required
- initialATimer: initial value of the A timer, in ms
- dtpPolicySet: name and version of the DTP policy set associated to this QoS cube
- dtcpPresent: true if a DTCP instance is required for every DTP instance, false otherwise
- dtcpPolicySet: name and verison of the DTCP policy set associated to this QoS cube
- rtxControl: true if DTCP performs rtx control, false otherwise
- flowControl: true if DTCP performs flow control, false otherwise
- rateBased: true if DTCP performs rate-based flow control, false otherwise
- windowBased: true if DTCP performs window-based flow control, false otherwise
- maxClosedWindowQueueLength: maximum length of the closed window queue
- initialCredit: initial credit of the window (only if window-based flow control is used)
The following DTCP policy sets are available in IRATI
3.2.2.2.1 Default policy
Very simple DTCP policies that implement retransmission control and a sliding window flow control policy with a fixed size window (configurable via the initialCredit parameter). The DTCP flow control policy does not react to congestion, packet loss or RTT delay variation.
- Policy name: default.
- Policy version: 0.
- Dependencies: None.
Example configuration:
"dtcpPolicySet" : {
"name" : "default",
"version" : "0"
}
3.2.2.2.2 DECNET binary feedback congestion control
Extends the default DTCP policies by reacting to congestion and adapting the window size, based on Raj Jain's binary feedback congestion control (additive increase, multiplicative decrease). Since the policy relies on Explicit Congestion Notification (ECN), it must be used in conjunction with its companion RMT policy (cas-ps).
- Policy name: cas-ps.
- Policy version: 1.
- Dependencies:
- RMT policy: cas-ps.
Example configuration:
"dtcpPolicySet" : {
"name" : "cas-ps",
"version" : "1",
"parameters" : [{
"name" : "w_inc_a_p",
"value" : "1"
}]
}
- w_inc_a_p: Number of units by which the window size will be increased under "additive increase" state (the default value is 1)
3.2.2.2.3 TCP ECN congestion control
Extends the default DTCP policies by reacting to congestion and adapting the window size, based on TCP Reno's congestion control strategy (but using Explicit Congestion Notification instead of packet loss as a sign of congestion). Since the policy relies on Explicit Congestion Notification (ECN), it must be used in conjunction with an ECN-marking RMT policy (such as cas-ps or red-ps).
- Policy name: red-ps.
- Policy version: 1.
- Dependencies:
- RMT policy: red-ps or cas-ps.
Example configuration:
"dtcpPolicySet" : {
"name" : "red-ps",
"version" : "1"
}
3.2.2.2.4 Data Center TCP congestion control
Extends the default DTCP policies by reacting to congestion and adapting the window size, based on the Data Center TCP (DCTCP) scheme. The goal of DCTCP is to achieve high burst tolerance, low latency, and high throughput, with commodity shallow buffered switches. DCTCP achieves these goals primarily by reacting to congestion in proportion to the extent of congestion. Since the policy relies on Explicit Congestion Notification, it must be used with its companion ECN-marking RMT policy (dctcp-ps).
- Policy name: dctcp-ps.
- Policy version: 1.
- Dependencies:
- RMT policy: dctcp-ps.
Example configuration:
"dtcpPolicySet" : {
"name" : "dctcp-ps",
"version" : "1",
"parameters" : [{
"name" : "shift_g",
"value" : "4"
}]
}
- shift_g: According the DCTCP paper, the g value should be small enough and all experiments
in the paper use
g = 0.0625 (1/16). Thus, theshift_g = 4is2^4 = 16(the default value is 4)
3.2.2.3 Known IPC Process addresses
IRATI only supports a very simple static address allocation policy right now. The configuration file defines a mapping betwenn the IPC Process application names and its address. It assumes that the IPC Process name is of the form <name.Organization>, so that if a specific entry for a name is not found but the configuration file defines what prefix is assgined to the Organization, then an address of the Organization range can still be assigned.
Example configuration:
"knownIPCProcessAddresses" : [ {
"apName" : "C.IRATI",
"apInstance" : "1",
"address" : 3
}, {
"apName" : "D.IRATI",
"apInstance" : "1",
"address" : 4
} ],
"addressPrefixes" : [ {
"addressPrefix" : 0,
"organization" : "N.Bourbaki"
}, {
"addressPrefix" : 16,
"organization" : "IRATI"
} ]
3.2.2.4 Relaying and Multiplexing Task
The Relaying and Multiplexing Task (RMT) configuration. The behaviour of the RMT is controlled by two policies: the forwarding function policy (which specifies how PDUs are forwarded), and the RMT policy (which controls the number of queues at the RMT, its monitoring and how PDUs are scheduled).
"rmtConfiguration" : {
"pftConfiguration" : {
"policySet" : {
"name" : "default",
"version" : "0"
}
},
"policySet" : {
"name" : "default",
"version" : "1"
}
}
IRATI supports the following Forwarding and RMT policies
3.2.2.4.1 Forwarding policy: default
The default forwarding policy is based on a forwarding table that maps the destination address and qos_id fields of PDUs to an N-1 port. The table lookup is based on a exact match of the destination address and qos_id fields (except if the qos_id value in the forwarding table is 0, then the qos_id value is ignored).
- Policy name: default.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"pftConfiguration" : {
"policySet" : {
"name" : "default",
"version" : "0"
}
}
3.2.2.4.2 Forwarding policy: multi-path
This policy extends the default forwarding policy with multi-path capabilities. If multiple N-1 flows are assigned to the same destination address and qos_id, this policy applies a hash-threshold algorithm (the one defined in the ECMP specification) to load-balance PDUs amongst the multiple N-1 flows. The algorithm preserves PDU packet ordering by forwarding PDUs belonging to the same flow through the same N-1 port.
- Policy name: multipath.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"pftConfiguration" : {
"policySet" : {
"name" : "multipath",
"version" : "1"
}
}
3.2.2.4.3 Forwarding policy: LFA
This policy extends the default forwarding policy with reliability capabilities. The routing algorithm populates the forwarding table computing multiple N-1 port-ids per each destination address, using the Loop-Free Alternates (LFA) algorithm. One port-id is the active one, and the other port-ids are the backup ones. If an N-1 port becames unusable, the forwarding algorithm switches to the backup port-ids for all destination addresses where the failing port-id was the active one.
- Policy name: lfa.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"pftConfiguration" : {
"policySet" : {
"name" : "lfa",
"version" : "1"
}
}
3.2.2.4.4 RMT policy: default
The default RMT policy set implements a simple FIFO queue per N-1 port. All the EFCP data transfer and control PDUs that need to be forwarded through the N-1 port are put in the FIFO queue. Layer management PDUs are put in a separate queue (per N-1 port) that has strict priority over the data transfer FIFO queue. When the queue is full, the PDUs that try to be enqueued are dropped.
- Policy name: default.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"rmtConfiguration" : {
"pftConfiguration" : {
....
}
},
"policySet" : {
"name" : "default",
"version" : "1",
"parameters" : [{
"name" : "q_max",
"value" : "1000"
}]
}
}
- q_max: The size of the FIFO queue (in PDUs). The default value is 1000 PDUs.
3.2.2.4.5 RMT policy: DECNET's binary feedback congestion control
This policy extends the RMT default policy by marking queued PDUs with the ECN flag when the average queue size is greater than 1 PDU.
- Policy name: cas-ps.
- Policy version: 1.
- Dependencies:
- DTCP policy: cas-ps.
Example configuration:
"rmtConfiguration" : {
"pftConfiguration" : {
....
}
},
"policySet" : {
"name" : "cas-ps",
"version" : "1",
"parameters" : [{
"name" : "q_max",
"value" : "1000"
}]
}
}
- q_max: The size of the FIFO queue (in PDUs). The default value is 1000 PDUs.
3.2.2.4.5 RMT policy: Random Early Detection (RED)
This policy extends the RMT default policy by marking queued PDUs with the ECN flag according to the Random Early Detection (RED) algorithm. This policy marks probabilistically PDUs with the ECN flag according to the configured thresholds.
- Policy name: red-ps.
- Policy version: 1.
- Dependencies:
- DTCP policy: red-ps.
Example configuration:
"rmtConfiguration" : {
"pftConfiguration" : {
....
}
},
"policySet" : {
"name" : "red-ps",
"version" : "1",
"parameters" : [{
"name" : "q_max_p",
"value" : "600"
}, {
"name" : "qth_min_p",
"value" : "17"
}, {
"name" : "qth_max_p",
"value" : "179"
}, {
"name" : "Wlog_p",
"value" : "7"
}, {
"name" : "Plog_p",
"value" : "12"
}]
}
}
- q_max_p: The size of the FIFO queue (in PDUs).
- qth_min_p: The size of the FIFO queue where probabilistic marking starts (if the size is smaller, no marking)
- qth_max_p: The size of the FIFO queue where probabilistic marking ends (if the size is larger, always marking)
- Wlog_p: the filter constant, controls intertia of the algorithm (decrease W to allow larger bursts)
- Plog_p: related to the marking probability
3.2.2.4.6 RMT policy: Data Center TCP (DCTCP)
The DCTCP policy for RMT is simple. It is possible to configure a queue size and a threshold. If queue size exceedes the threshold, the RMT starts to mark PDUs with explicit congestion flag (ECN).
- Policy name: dctcp-ps.
- Policy version: 1.
- Dependencies:
- DTCP policy: dctcp-ps.
Example configuration:
"rmtConfiguration" : {
"pftConfiguration" : {
....
}
},
"policySet" : {
"name" : "dctcp-ps",
"version" : "1",
"parameters" : [{
"name" : "q_threshold",
"value" : "20"
}, {
"name" : "q_max",
"value" : "500"
}]
}
}
- q_max: The maximum size of the queue
- q_threshold: Sets the queue threshold. If the queue size is exceeded, PDUs will be marked with ECN flag.
3.2.2.4.7 RMT policy: QTAMux
Documented in plugins/qtamux
3.2.2.5 Enrollment Task
Configuration of the enrollment task, which carries out the procedures by which an IPC Process joins a DIF. Currently only the default policy is supported by IRATI.
"enrollmentTaskConfiguration" : {
"policySet" : {
"name" : "default",
"version" : "1",
"parameters" : [{
"name" : "enrollTimeoutInMs",
"value" : "10000"
},{
"name" : "watchdogPeriodInMs",
"value" : "30000"
},{
"name" : "declaredDeadIntervalInMs",
"value" : "120000"
},{
"name" : "useReliableNFlow",
"value" : "false"
},{
"name" : "maxEnrollmentRetries",
"value" : "3"
},{
"name" : "n1flows:normal.DIF",
"value" : "2:10/200:0/10000"
}]
}
}
- enrollTimeoutInMs: timeout to wait for response messages during enrollment procedures
- watchdogPeriodInMs: period of the watchdog mechanism, to detect if the application connection with a peer IPC Process is still alive
- declaredDeadIntervalInMs: if no watchdog message has been sent or received from a neighbor IPCP during this period, the application connection is closed and the N-1 flow deallocated
- useReliableNFlow: true if a realible N-flow is to be used to communicate with the neighbor IPCP (layer management)
- maxEnrollmentRetries: how many times enrollment should be retried in case of failure
- n1flows::difname (optional): how many flows will be allocated between peer IPCPs (when the N-1 DIF is difname), and what are the delay/loss characteristics of each one. The first flow will be used for layer management and data transfer, the others just for data transfer. In the example configuration, two N-1 flows will be requested: one with a maximum delay of 10 ms and a maximum loss probability of 200/10000 SDUs, while the other without loss and delay guarantees.
3.2.2.6 Flow Allocator
Flow allocator maps allocate flow requests to a specific QoS cube, and chooses any policies/parameters that the QoS cube definition has not already fixed. The default policy just distinguishes between reliable (with rtx control and in order-delivery) and unreliable flow requests.
"flowAllocatorConfiguration" : {
"policySet" : {
"name" : "default",
"version" : "1"
}
}
3.2.2.7 Namespace Manager
The namespace manager maintains the distributted mapping of application process name to IPC Process address within a DIF, and is also responsible for IPCP address assignment.
"namespaceManagerConfiguration" : {
"policySet" : {
"name" : "default",
"version" : "1"
}
}
3.2.2.7.1 Default policy
The default policy keeps a fully replicated database of application names to IPCP addresses. When an application registers to the IPCP a new mapping is added to the RIB and disseminated to peer IPCPs via a controlled flooding approach. The address assignment policy is static and uses the information from the "known IPC Processes" and "address prefixes" configuration items.
- Policy name: default.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"namespaceManagerConfiguration" : {
"policySet" : {
"name" : "default",
"version" : "1"
}
}
3.2.2.7.2 Address change policy
This policy extends the default policy with an address assignment policy that periodically changes the address of the IPC Process. It assigns and initial address based on the information form the "known IPC Processes" and "address prefixes" configuration items, but it multiplies it for the "range" parameter. Then, it periodically changes the address (randomly within a time interval), walking all the values within the "range" and starting from the initial value once it reaches the end of the "range". This policy must be used in conjunction with the link-state routing policy.
- Policy name: address-change.
- Policy version: 1.
- Dependencies:
- routing policy: link-state.
Example configuration:
"namespaceManagerConfiguration" : {
"policySet" : {
"name" : "address-change",
"version" : "1",
"parameters" : [{
"name" : "useNewTimeout",
"value" : "10001"
},{
"name" : "deprecateOldTimeout",
"value" : "20001"
},{
"name" : "changePeriod",
"value" : "30001"
},{
"name" : "addressRange",
"value" : "100"
}]
}
}
- useNewTimeout: Time ellapsed (in ms) after the address change event upon which the new address can be used as source address in the header of EFCP PDUs.
- deprecateOldTimeout: Time ellapsed (in ms) after the address change event upon which the old address can be discarded. Must have the same value as the waitUntilDeprecateAddress parameter of the link-state routing policy configuration.
- changePeriod: Time interval between address change events (in ms).
- addressRange: Range of addresses available to a single IPC Process.
3.2.2.8 Resource Allocator
Generates the PDU forwarding table based on input from the routing policy (next-hop table). Right now only the default policy is supported in IRATI.
"resourceAllocatorConfiguration" : {
"pduftgConfiguration" : {
"policySet" : {
"name" : "default",
"version" : "0",
"parameters" : [{
"name" : "1.qosid",
"value" : "10/200"
},{
"name" : "2.qosid",
"value" : "10/200"
},{
"name" : "3.qosid",
"value" : "0/10000"
},{
"name" : "4.qosid",
"value" : "0/10000"
}]
}
}
}
The optional parameters are used to map the qos id of the flows at this DIF to characteristics of the N-1 DIFs through which the flow should be forwarded (only delay/loss right now). For instance the configuration above will add entries to the PDU forwarding table so that entries belonging to QoS ids 1 and 2 are forwarded via an N-1 flow that has a maximum delay of 10 ms and a maximum loss probability of 200/10000 SDUs. Entries belonging to QoS ids 3 and 4 will be forwarded via an N-1 flow that does not provide any guarantees on loss and delay.
3.2.2.9 Routing
The routing policy is in charge of generating and maintaining the next-hop table, and passing this information to the Resource Allocator's PDU Forwarding Table generator policy.
3.2.2.9.1 Link-state routing policy
Implements a link-state routing policy, equivalent to the behaviour of routing protocols such as IS-IS (with a single area).
- Policy name: link-state.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"routingConfiguration" : {
"policySet" : {
"name" : "link-state",
"version" : "1",
"parameters" : [{
"name" : "objectMaximumAge",
"value" : "10000"
},{
"name" : "waitUntilReadCDAP",
"value" : "5001"
},{
"name" : "waitUntilError",
"value" : "5001"
},{
"name" : "waitUntilPDUFTComputation",
"value" : "103"
},{
"name" : "waitUntilFSODBPropagation",
"value" : "101"
},{
"name" : "waitUntilAgeIncrement",
"value" : "997"
}, {
"name" : "waitUntilDeprecateAddress",
"value" : "20001"
},{
"name" : "routingAlgorithm",
"value" : "ECMPDijkstra"
}]
}
}
- objectMaximumAge: maximum age that an object can reach before being deprecated
- waitUntilPDUFTComputation: Period (in ms) to check if the PDU Forwarding Table needs to be recomputed
- waitUntilFSODBPropagation: Period (in ms) to check if the link-state objects in the RIB need to be propagated
- waitUntilAgeIncrement: Period (in ms) to check if the age of an object in the RIB needs to be increased
- waitUntilDeprecateAddress: Time to wait (in ms) before deprecating an address in a link-state routing object after an address change event (only useful if there is renumbering going on in the DIF. Must be the same as the deprecateOldTimeout parameter in the address-change namespacemanager policy)
- routingAlgorithm: The routing algorithm to generate the next-hop table. Available algorithms:
- Dijkstra: Computes the least-cost next hop to all destination addresses in the DIF (single next-hop per destination address)
- ECMPDijkstra: Computes all the equal-cost next hops to all destination addresses in the DIF (multiple next-hops per destination address)
3.2.2.9.2 Static routing policy
Implements a static routing policy, in which all entries of the next-hop table are provided at IPC Process configuration time.
- Policy name: static.
- Policy version: 1.
- Dependencies: none.
Format of configuration:
"routingConfiguration" : {
"policySet" : {
"name" : "static",
"version" : "1",
"parameters" : [{
"name" : "<dest-address (single/range/all)>",
"value" : "<qos_id>-<cost>-<next_hop_addresss>"
},{
"name" : "<dest-address (single/range/all)>",
"value" : "<qos_id>-<cost>-<next_hop_addresss>"
},{
....
}]
}
}
Each parameter is an entry (or multiple) of the next-hop table. The name of the parameter can refer to a
- Single destination address: "19"
- A range of destination addresses: "20-31"
- All destination addresses: "defaultNextHop"
While the value of the parameter is the next hop address for a given cost and qos_id.
Example configurations:
"routingConfiguration" : {
"policySet" : {
"name" : "static",
"version" : "1",
"parameters" : [{
"name" : "defaultNextHop",
"value" : "0-1-18"
}]
}
}
"routingConfiguration" : {
"policySet" : {
"name" : "static",
"version" : "1",
"parameters" : [{
"name" : "1-16",
"value" : "0-1-18"
}, {
"name" : "15-30",
"value" : "0-1-19"
}, {
"name" : "32",
"value" : "0-1-20"
}]
}
}
3.2.2.10 Security Manager
The security manager configuration contains the security manager policy and zero or more configuration items for "authentication and SDU protection profiles" (authSDUProfiles). Each authSDUProfile contains a consistent set of authentication and SDU protection that need to be used to communicate with all neighbor IPC Processes, or only with neighbor IPC Processes over specific N-1 DIFs.
Example format:
"securityManager" : {
"policySet" : {
"name" : "default",
"version" : "0"
},
"authSDUProtProfiles" : {
"default" : {
"authPolicy" : {
"name" : "PSOC_authentication-sshrsa",
"version" : "1",
"parameters" : [ {
"name" : "keyExchangeAlg",
"value" : "EDH"
}, {
"name" : "keystore",
"value" : "/usr/local/irati/etc/private_key.pem"
}, {
"name" : "keystorePass",
"value" : "test"
} ]
},
"encryptPolicy" : {
"name" : "default",
"version" : "1",
"parameters" : [ {
"name" : "encryptAlg",
"value" : "AES128"
}, {
"name" : "macAlg",
"value" : "SHA1"
}, {
"name" : "compressAlg",
"value" : "default"
} ]
},
"TTLPolicy" : {
"name" : "default",
"version" : "1",
"parameters" : [ {
"name" : "initialValue",
"value" : "50"
} ]
},
"ErrorCheckPolicy" : {
"name" : "CRC32",
"version" : "1"
}
},
"specific" : [ {
"underlyingDIF" : "100",
"authPolicy" : {
"name" : "PSOC_authentication-none",
"version" : "1"
}
}, {
"underlyingDIF" : "110",
"authPolicy" : {
"name" : "PSOC_authentication-password",
"version" : "1",
"parameters" : [ {
"name" : "password",
"value" : "kf05j.a1234.af0k"
} ]
},
"TTLPolicy" : {
"name" : "default",
"version" : "1",
"parameters" : [ {
"name" : "initialValue",
"value" : "50"
} ]
},
"ErrorCheckPolicy" : {
"name" : "CRC32",
"version" : "1"
}
} ]
}
}
3.2.2.10.1 Authentication policy: NULL authentication policy
The policy performs no authentication, just checks policy names and versions and returns success.
- Policy name: PSOC_authentication-none.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"authPolicy" : {
"name" : "PSOC_authentication-none",
"version" : "1"
}
3.2.2.10.2 Authentication policy: password-based
Authentication is carried out by hashing a random string with a shared secret (the password).
- Policy name: PSOC_authentication-password.
- Policy version: 1.
- Dependencies: none.
Example configuration:
"authPolicy" : {
"name" : "PSOC_authentication-password",
"version" : "1",
"parameters" : [ {
"name" : "password",
"value" : "kf05j.a1234.af0k"
} ]
}
- password: the shared secret
3.2.2.10.3 Authentication policy: SSH2-based
Authentication policy that mimics the behaviour of the SSH2 protocol authentication mechanism.
- Policy name: PSOC_authentication-ssh2.
- Policy version: 1.
- Dependencies:
- SDU Protection, crypto policy: default
Example configuration:
"authPolicy" : {
"name" : "PSOC_authentication-ssh2",
"version" : "1",
"parameters" : [ {
"name" : "keyExchangeAlg",
"value" : "EDH"
}, {
"name" : "keystore",
"value" : "/usr/local/irati/etc/creds"
}, {
"name" : "keystorePass",
"value" : "test"
} ]
}
- keyExchangeAlg: The key exchange algorithm. Only EDH is available right now (Elliptic-Curve Diffie-Hellman.
- keyStore: A folder containing the credentials. The contents of the folder should be the following files:
- key: The RSA private key of the IPCP in PEM format (generated for example with openssl genrsa -out key 2048)
- public_key: The RSA public key of the IPCP in PEM format (extracted from the private key file, for example with openssl rsa -in key -pubout > mykey.pub)
- For each IPCP whose public key is known, a file containing his public key in PEM format. The file must be named with the IPC Process application process name. For example, imagine the IPCP has 3 neighbours, then there would be 3 files: B.IRATI, C.IRATI and D.IRATI.
- keystorePass: Password to decrypt information in the keystore (if needed)
3.2.2.10.4 Authentication policy: TLS-Handhsake based
Authentication policy that mimics the behaviour of the TLS handshake protocol.
- Policy name: PSOC_authentication-tlshandshake
- Policy version: 1.
- Dependencies:
- SDU Protection, crypto policy: default
Example configuration:
"authPolicy" : {
"name" : "PSOC_authentication-tlshandshake",
"version" : "1",
"parameters" : [ {
"name" : "keystore",
"value" : "/usr/local/irati/etc/creds"
}, {
"name" : "keystorePass",
"value" : "test"
} ]
}
- keyStore: A folder containing the credentials. The contents of the folder should be the following files:
- key: contains the RSA private key of the IPCP, in PEM format.
- cert.pem: contains the certificate of the IPCP, in PEM format.
- <cert_name>.pem: one PEM file for every certificate required to reach the (or one of the) root of trust of the DIF (root CA).
- keystorePass: Password to decrypt information in the keystore (if needed)
3.2.2.10.5 SDU Protection, crypto policy: default
The default SDU protection policies carries out cryptographic manipulations of the PDU before being trasmitted through an N-1 flow, in order to provide confidentiality and message integrity services. The policy performs the following operations: encryption, padding, generating message auhentication (MAC) codes and compression; as well as their counterpart operations.
- Policy name: default
- Policy version: 1.
- Dependencies:
- Authentication policy: PSOC_authentication-tlshandshake or PSOC_authentication-ssh2
Example configuration:
"encryptPolicy" : {
"name" : "default",
"version" : "1",
"parameters" : [ {
"name" : "encryptAlg",
"value" : "AES128"
}, {
"name" : "macAlg",
"value" : "SHA256"
}, {
"name" : "compressAlg",
"value" : "deflate"
} ]
}
- encryptAlg: The encryption algorithm to be used. Currently two are supported: AES128 and AES256.
- macAlg: The algorithm to generate a MAC code. Supported algorithms are: MD5, SHA1 and SHA256.
- compressAlg: The algorithm to compress/decompress PDUs. Only the "deflate" algorithm is supported.
3.2.2.10.6 SDU Protection, PDU lifetime enforcement: default
The default PDU lifetime enforcement policy is a hopcount that starts on a configured initial value and is decremented at each hop. When it reaches 0, the PDU is dropeed.
- Policy name: default
- Policy version: 1
- Dependencies: none
Example configuration:
"TTLPolicy" : {
"name" : "default",
"version" : "1",
"parameters" : [ {
"name" : "initialValue",
"value" : "50"
} ]
}
- initialValue: Initial value of the hopcount.
3.2.2.10.7 SDU Protection, error protection: CRC32
This policy protects the PDU against random errors on its bytes by appending a CRC32 field to it.
- Policy name: CRC32
- Policy version: 1
- Dependencies: none
Example configuration:
"ErrorCheckPolicy" : {
"name" : "CRC32",
"version" : "1"
}
3.3 Running the IPC Manager Daemon
Once the configuration file is ready you can un the IPC Manager Daemon. To do so go to the INSTALLATION_PATH/bin folder and type:
$ ./ipcm -c <PATH TO THE CONFIGURATION FILE>
There are more options for the ipcm launch script, to see them just type
$ ./ipcm --help
IRATI has a local management console to interact with the IPC Manager Daemon and get information on the state of the software (number of IPCPs, type, status, DIF information, etc.). To access the management console type
$ socat - UNIX:/<INSTALLATION_PATH>/var/run/ipcm-console.sock
Type help to get an overview of all available commands:
- help: Show the list of available commands or the usage of a specific command.
- exit or quit: Exit the console.
- create-ipcp: Create a new IPC process.
- destroy-ipcp: Destroy an existing IPC process.
- list-ipcps: List the existing IPC processes with associated information.
- list-ipcp-types: List the IPC process types currently available in the system.
- assign-to-dif: Assign an IPC process to a DIF.
- register-at-dif: Register an IPC process within a DIF.
- unregister-from-dif: Unregister an IPC process from a DIF.
- enroll-to-dif: Enroll an IPC process to a DIF.
- query-rib. Display the information of the objects present at RIB of an IPC Processs.
- query-ma-rib. Display the information of the objects present at the RIB of a management agent.
- show-dif-templates. Display the DIF templates known by the IPC Manager.
- show-catalog. Show the catalog of plugins available in the system, with their policy-sets.
- update-catalog. Tell the IPC Manager to refresh its list of known plugins.
- plugin-get-info. Get information about a plugin (policy-sets, versions)
- plugin-load. Load a plugin.
- plugin-unload. Unload a plugin.
- select-policy-set. Select a policy set for a specific component of a specific IPC Process in the system.
- set-policy-set-param. Select a parameter of a specific policy-set for a specific component of a specific IPC Process in the system.
Example of IPCM console output:
IPCM >>> list-ipcps
Management Agent not started
Current IPC processes (id | name | type | state | Registered applications | Port-ids of flows provided)
1 | eth.1.IPCP:1:: | shim-eth-vlan | ASSIGNED TO DIF 2003 | renumber.19.IPCP-1-- | 2
2 | eth.2.IPCP:1:: | shim-eth-vlan | ASSIGNED TO DIF 2005 | renumber.19.IPCP-1-- | 1
3 | eth.3.IPCP:1:: | shim-eth-vlan | ASSIGNED TO DIF 2006 | renumber.19.IPCP-1-- | 4
4 | eth.4.IPCP:1:: | shim-eth-vlan | ASSIGNED TO DIF 2007 | renumber.19.IPCP-1-- | 3
5 | renumber.19.IPCP:1:: | normal-ipc | ASSIGNED TO DIF renumber.DIF | - | -
Now applications can be run that use the IPC API. Look at the Tutorials section for some step-by-step examples on how to use the rina-echo-time test application to experiment with IRATI.
4. Simple Manager
The simple Manager application is part of the rina-tools package and distributed with the IRATI source code. It is a simple Manager for the Network Management DAF (NM-DAF), that accepts remote application connections from one or more Management Agents (MAs, see section 3.2.1) and enables the remote creation/destruction/configuration of IPCPs at the systems managed by those MAs.
4.1 Running the Manager
The Manager application can be launched by running net_manager from the bin folder of the IRATI installation. As any application, it requires that at least one DIF is locally created in order to register to it. The user running the Manager can specify the DIF(s) it wants the Manager to register, using command line arguments. The following listing provides information on all usage of the net_manager command.
root@irativm3:/usr/local/irati/bin# ./net_manager -h
USAGE:
./net_manager [-t <string>] [-c <string>] [-d <string>] [--manager-api
<string>] [--manager-apn <string>] [--] [--version] [-h]
Where:
-t <string>, --dif-templates-path <string>
The path to the DIF Templates folder
-c <string>, --console-path <string>
The path to the Network Management console UNIX socket
-d <string>, --difs-to-register-at <string>
The names of the DIFs to register at, separated by ',' (empty means
'any DIF')
--manager-api <string>
Application process instance for the Network Manager process
--manager-apn <string>
Application process name for the Network Manager process
--, --ignore_rest
Ignores the rest of the labeled arguments following this flag.
--version
Displays version information and exits.
-h, --help
Displays usage information and exits.
Once registered at the DIF(s), the Manager will wait for remote application requests from MAs, and enroll them into the Network Management DAF (NM-DAF). The Manager features a local console available via a UNIX socket, that allows a local admin to interact with it. It can be reached by typing
root@irativm3:/home/irati/stack# socat - UNIX:/var/run/nmconsole.sock
IPCM >>> help
Available commands:
create-dif
create-ipcp
destroy-dif
destroy-ipcp
exit
help
list-systems
query-rib
quit
The list-systems commands displays information about the MAs that are enrolled to the NM-DAF.
IPCM >>> list-systems
Managed Systems
system id MA name | port-id
2 | host1-1 | 8
1 | manager-1 | 7
4.2 Creating a single IPCP in a system
The create-ipcp command triggers the creation of an IPCP in a system. The syntax of the command is
IPCM >>> create-ipcp
USAGE: create-ipcp <system-id> <path to IPCP descriptor file>
The IPCP descriptor file contains information on the IPCP to be created. An example descriptor file is the following:
{
"ipcp_data" : {
"type" : "normal-ipc",
"dif_name" : "slice1",
"template" : "normal.dif",
"registrations" : ["normal.DIF"]
}
}
The type attribute is the type of the IPCP (normal or one of the shims). The dif_name attribute is the name of the DIF where the IPC Process will enroll. The template attribute is the name of a DIF template configuration file with the configuration of the IPC Process (the file must be within the <IRATI_INSTALLTION>/etc folder. Finally, the registrations attribute contains a list of N-1 DIFs where the IPCP needs to register. An example of the usage of this command is the following:
IPCM >>> create-ipcp 1 /usr/local/irati/etc/ipcp.desc
IPC process created successfully [ipcp_id = 3, system_id=1]
4.3 Destroying a single IPCP in a system
The destroy-ipcp command triggers the destruction of an IPCP in a system. The syntax of the command is
IPCM >>> destroy-ipcp
USAGE: destroy-ipcp <system-id> <ipcp-id>
An example of the usage of this command is the following:
IPCM >>> destroy-ipcp 1 3
IPC process destroyed successfully [id = 3]
4.4 Creating a DIF
The create-dif command triggers the creation of a DIF, which basically creates one or more IPCPs in multiple systems, registers them on N-1 DIFs and triggers enrollments. The syntax of the command is
IPCM >>> create-dif
USAGE: create-dif <path to DIF descriptor file>
The DIF descriptor file contains information on the DIF to be created. An example descriptor file is the following:
{
"dif_name" : "slice1",
"dif_type" : "normal-ipc",
"ipcps" : [ {
"system_name" : "manager",
"dif_template" : "normal.dif",
"registrations" : ["normal.DIF"]
}, {
"system_name" : "host1",
"dif_template" : "normal.dif",
"registrations" : ["normal.DIF"],
"neighbors" : [ {
"ipcp_name" : "manager.slice1",
"under_dif" : "normal.DIF"
} ]
} ]
}
The dif_name attribute is the name of the DIF. The dif_type attribute is the type of IPCPs that will be created on this DIF. The ipcps element contains a list of IPCP configurations, one per each IPCP to be created. The system_name attribute is the name of the system where the IPCP will be created. The dif_template argument is the name of the DIF template with the configuration of the IPCP (the DIF template file needs to be in the <IRATI_INSTALLATION>/etc folder). The registrations element contains an array of N-1 DIF names where the new IPCP will register. The neighbors element contains a list of neighbor IPCPs that the new IPCP will enroll to (those neighbor IPCPs need to be created before the new IPCP). An example of the usage of this command is the following:
IPCM >>> create-dif /usr/local/irati/etc/slice1e.ddesc
DIF created.IPCPs created at the following systems:
System host1, id 4
System manager, id 3
4.5 Destroying a DIF
The destroy-dif command triggers the destruction of a DIF, which destroys one or more IPCPs in multiple systems. The syntax of the command is
IPCM >>> destroy-dif
USAGE: destroy-dif <dif-name>
An example of the usage of this command is the following:
IPCM >>> destroy-dif slice1
DIF slice1 destroyed.IPCPs destroyed at the following systems:
System 1, id 3
System 2, id 4
5. Tutorials
Several tutorials are available at https://github.com/IRATI/stack/wiki/Tutorials
6. Overview of the software components
This section provides an overview of the software architecture and components of IRATI. For a more detailed explanation we direct the reader to FP7-IRATI's at http://irati.eu:
- D3.1: http://irati.eu/wp-content/uploads/2012/07/IRATI-D3.1-v1.0.pdf
- D3.2: http://irati.eu/wp-content/uploads/2012/07/IRATI-D3.2-v1.0.pdf
- D3.3: http://irati.eu/wp-content/uploads/2012/07/IRATI-D3.3-bundle.zip
The FP7 PRISTINE (http://ict-pristine.eu) project enhanced the base IRATI implementation with a Software Development Kit to allow for programmbility of policies for the different components, and the ability to dynamically load the plugins containing such policies at runtime. Documentation about the SDK is available at the following URLs:
- D2.3: http://ict-pristine.eu/wp-content/uploads/2013/12/pristine-d23-sdk-v1_0.pdf
- D2.5: http://ict-pristine.eu/wp-content/uploads/2013/12/pristine-d25-draft.pdf
The software architecture of IRATI is shown in Figure 1.
Figure 1. Source: S. Vrijders et al; "Prototyping the recursive internet architecture: the IRATI project approach ", IEEE Network Vol 28 (2), pp. 20-25, March 2014
The main components of IRATI have been divided into four packages:
-
Daemons (rinad). This package contains two types of daemons (OS Processes that run in the background), implemented in C++.
- IPC Manager Daemon (rinad/src/ipcm). The IPC Manager Daemon is the core of IPC Management in the system, acting both as the manager of IPC Processes and a broker between applications and IPC Processes (enforcing access rights, mapping flow allocation or application registration requests to the right IPC Processes, etc.)
- IPC Process Daemon (rinad/src/ipcp). The IPC Process Daemons (one per running IPC Process in the system) implement the layer management components of an IPC Process (enrollment, flow allocation, PDU Forwarding table generation or distributed resource allocation functions).
-
Librina (librina). The librina package contains all IRATI libraries that have been introduced to abstract from the user all the kernel interactions (such as syscalls and Netlink details). Librina provides its functionalities to user-space RINA programs via scripting language extensions or statically/dynamically linkable libraries (i.e. for C/C++ programs).
-
Kernel components (linux/net/rina). The kernel contains the implementation of the data transfer / data transfer control components of normal IPC Processes as well as the implementation of shim DIFs - which usually need to access functionality only available at the kernel. The Kernel IPC Manager (KIPCM) manages the lifetime (creation, destruction, monitoring) of the other component instances in the kernel, as well as its configuration. It also provides coordination at the boundary between the different IPC processes.
-
Test applications and tools (rina-tools). This package contains test applications and tools to test and debug the RINA Prototype.