SME ( sur_myevic )
Документация на русском / russian manual
SME is a fork of myevic custom firmware for vaping mods from ClockSelect
Based on:
Original VTC Mini 3.03 firmware
Main Features:
The look-and-feel of the myevic firmware is more-or-less identical to the original firmware, so you shouldn't be lost.
All new features and options are made available through the menu system.
A list of some differences from the original firmware (google translate)
- allowable resistance from 0.05 Ohm in all modes.
- Repeat mode (replay) - simple replacement of the thermal control operation in the Power mode.
- Profiles to save different settings and quickly apply them.
- more configurable window-change timeouts.
- heating curves, smart preheating in Power, various heating algorithms in thermal control.
- the reaction time for a combination of buttons is shortened.
- there is no automatic power-down with a weak battery charge. It's honest.
- Varivolt mode, when the voltage does not change during the soaring.
- safety: stop fire, and then turn off the mode, if the fire button is pressed longer than the set hover cutoff.
- USB charge disconnection during overtemperature (for 2+ battery modes).
- automatic shutdown mode after reaching the user specified number of puffs or the operating time of the mod.
- in the information line, you can choose to display a set of important information, not just puffs and amps.
- in the first interface of the screen an additional information line is added, for greater clarity.
- the second screen mode, where the power and resistance lines are shown with large font.
- a short-time display of clocks in the off mode.
- turn off/on the charging screen of the mod by the minus button. Timeouts of the charging screen display.
- setting maximum values power, voltage, temperature, charging current (for 2+ battery modes), number of batteries for bypass.
- adjust the screen flip during tightening.
- smart screen inversion, does not show empty white screens.
- correction of the board temperature and determination of the resistance of the atomizer.
- more accurate display of resistance in idle time to the third sign.
- edit your battery profile from the mod menu.
- Reset resistance to the real current, without twisting the atomizer.
- setting the initial temperature of the resistance blocking for the thermal control mode, not only 20 degrees.
- selection for graphical display of all 1-2-3-4 batteries, percentage and voltage to choose from.
- Autofire. Hover with the specified tightening time without constant holding down the Start button. Infinite autofire.
- reset all counters at once; reset resetting counters if a fresh battery is inserted, or the battery is charged in box-fashion itself.
- counters of evaporated liquid and expended energy. The counter evaporated per day is reset automatically at midnight. Set the reset at midnight to other counters.
- a lot of options for animation 3D screensavers. Support for logos 64x40, 64x48.
- press plus button for information why mod is in off state.
- games Tetris and Flappy Bird for fun.
Old detailed English documentation for ClockSelect`s myevic may not be correct for this SME version! Read the Russian manual!
Документация на русском / russian manual
Thanks to:
* ClockSelect
* ReservedField
* Bane
* TBXin
* maelstrom2001
* Daveee10
* Eugene San
* MarkyAD
* bluenazgul
* Sharky1980
* gdb
* Dil3mm4 (en documentation)
And many others, supporting this project and taking the time to open or help solving issues.
Donations to buy mods for support by this firmware (for MicroSur): paypal.me/MicroSur