borisfaure / Terminology
Programming Languages
Projects that are alternatives of or similar to Terminology
Terminology 1.9.0
This is an EFL terminal emulator with some extra bells and whistles.
⚠️ ⚠️ ⚠️
FOR ANY ISSUES, PLEASE CONSULT THEM ON http://issues.terminolo.gy/
⚠️ ⚠️ ⚠️
Requirements
-
efl
(>= 1.22.0)
Please see http://www.enlightenment.org for information on these.
Compiling
Once you have met requirements, compiling and installing is simple:
meson build
cd build
ninja
ninja install
Note: to make terminology work with input methods in general you need:
export ECORE_IMF_MODULE="xim"
export XMODIFIERS="@im=none"
Themes
Apart from the ones shipped with Terminology, themes can be stored in
~/.config/terminology/themes/
.
Documentation on themes is written in THEMES.md.
Color Schemes
Terminology ships with some common color schemes.
To know how to modify or add some new color schemes, please read COLORSCHEMES.md.
Mouse controls
-
Right mouse button
= controls menu -
Middle mouse button
= paste highlight selection -
Left mouse button/drag
= make highlight -
Wheel
= scroll up or down in history -
Ctrl+Wheel
= zoom font size up/down -
Ctrl+Left mouse button/drag
= make block selection highlight
Default key controls
-
Shift+PgUp
= Scroll 1 page up -
Shift+PgDn
= Scroll 1 page down -
Shift+Up
= Scroll 1 line up -
Shift+Down
= Scroll 1 line down -
Shift+Home
= Scroll to the top of the backlog -
Shift+End
= Reset scroll -
Shift+Left
= switch focus to previous terminal inside a window -
Shift+Right
= switch focus to next terminal inside a window -
Shift+Insert
= Paste Clipboard (ctrl+v/c
) selection -
Shift+Ctrl+Insert
= Paste Primary (highlight) selection -
Shift+Keypad-Plus
= Font size up 1 -
Shift+Keypad-Minus
= Font size down 1 -
Shift+Keypad-Multiply
= Reset font size -
Shift+Keypad-Divide
= Copy highlight to Clipboard (same asCtrl+c
in gui apps) -
Ctrl+PgUp
= switch focus to previous terminal inside a window -
Ctrl+PgDn
= switch focus to next terminal inside a window -
Ctrl+Shift+t
= create new terminal on top of current inside window (tabs) -
Ctrl+Shift+End
= close the focused terminal. -
Ctrl+Shift+h
= toggle displaying the miniview of the history -
Ctrl+Shift+Home
= bring up "tab" switcher -
Ctrl+Shift+PgUp
= split terminal horizontally (1 term above the other) -
Ctrl+Shift+PgDn
= split terminal vertically (1 term to the left of the other) -
Ctrl+Shift+c
= copy current selection to clipboard -
Ctrl+Shift+v
= paste current clipboard selection -
Alt+Home
= Enter command mode (enter commands to control terminology itself) -
Alt+Return
= Paste primary selection -
Alt+g
= Group input: send input to all visible terminals in the window -
Alt+Shift+g
= Group input: send input to all terminals in the window -
Alt+w
= Copy selection to primary -
Alt+Up
= Focus the terminal above -
Alt+Down
= Focus the terminal below -
Alt+Left
= Focus the terminal on the left -
Alt+Right
= Focus the terminal on the right -
Ctrl+Alt+Equal
= Font size up 1 -
Ctrl+Alt+Minus
= Font size down 1 -
Ctrl+Alt+0
= Reset font size -
Ctrl+Alt+9
= Big font size -
Ctrl+Alt+t
= Set terminal title -
Ctrl+1
= switch to terminal tab 1 -
Ctrl+2
= switch to terminal tab 2 -
Ctrl+3
= switch to terminal tab 3 -
Ctrl+4
= switch to terminal tab 4 -
Ctrl+5
= switch to terminal tab 5 -
Ctrl+6
= switch to terminal tab 6 -
Ctrl+7
= switch to terminal tab 7 -
Ctrl+8
= switch to terminal tab 8 -
Ctrl+9
= switch to terminal tab 9 -
Ctrl+0
= switch to terminal tab 10
Companion tools
Terminology ships with a set of tools to help you get the best out of Terminology.
-
tyls
: list directory contents with bells and whistles -
tyalpha
: set transparency level of the background -
tybg
: change the background image -
tycat
: display inline a media file or a URI -
typop
: display in a popup a media file or a URI -
tyq
: queue media files or URI to be popped up -
tysend
: send files to the terminal (useful through ssh)
Extended escapes for terminology only
[\033][}][COMMAND][\000]
i.e.
-
ESC
char (\033
or0x1b
) -
}
char - a sequence of UTF8 chars other than
nul
(\000
or0x00
). -
\000
char (nul
byte or0x00
to indicate end of sequence)
e.g.
echo -n '\033}Hello world\000'
Commands
In the following, any values inside square brackets []
are to be replaced
by some content (numbers, strings, paths, url's etc.).
examples:
-
aa[PATH-OF-FILE]
should become something like:aa/tmp/file.png
-
aa[true/false]
should become something like:aatrue
oraafalse
Available commands
-
pn[FULL-PATH-OR-URL]
popup the given media file/url now -
pq[FULL-PATH-OR-URL]
queue a popup for the given media file/url -
bt[FULL-PATH-OR-URL]
set the terminal background media file/url temporarily -
bp[FULL-PATH-OR-URL]
set the terminal background media file/url permanently -
at[on/true/yes/off/false/no]
set the terminal alpha state to be on, or off temporarily -
ap[on/true/yes/off/false/no]
set the terminal alpha state to be on, or off permanently -
qs
query grid and font size. stdin will have written to it:W;H;FW;FH\n
- where
W
is the width of the terminal grid in characters - where
H
is the height of the terminal grid in characters - where
FW
is the width of 1 character cell in pixels - where
FH
is the height of 1 character cell in pixels
- where
-
is[CW;H;FULL-PATH-OR-URL]
insert Stretched media (where image will stretch to fill the cell area) and define expected cell area to beW
cells wide andH
cells high, with the image/media/url.- where
C
is the replace character to be identified in later text - where
W
is the width in character cells (up to 511). - where
H
is the height in character cells (up to 511).
note that this escape alone has no effect. It indicates a future intention of inserting media into the terminal. the terminal will EXPECT a grid of
WxH
replace characters to follow, with each sequence of such replace characters beginning with aib
escape command and ending with an 'ie' escape command.the
FULL-PATH-OR-URL
for all thei
commands (is
,ic
,if
,it
) may be of the form:/full/path/to/file.png
- OR
/full/path/to/link\n/full/path/to/file.png
where a newline character separates a URI for a link and a full path to a file to display in the region. the link is the destination URI when a user may click on the given media image.
example:
printf("\033}is#5;3;%s\000" "\033}ib\000#####\033}ie\000\n" "\033}ib\000#####\033}ie\000\n" "\033}ib\000#####\033}ie\000\n", "/tmp/icon.png");
note that
#
is the replace character, and later#
chars if inside begin/end escapes, will be replaced by the given media indicated in the insert media escape. - where
-
ic[CW;H;FULL-PATH-OR-URL]
insert Centered media (centered in cell area). Otherwise parameters are identical to theis
command, but retains aspect and is padded by blank space. -
if[CW;H;FULL-PATH-OR-URL]
insert Filled media (fill in cell area). Otherwise parameters are identical to theis
command but ensures the entire area is filled like a background even if media goes beyond cell bounds and is clipped. -
it[CW;H;FULL-PATH-OR-URL]
insert Thumb media (thumbnail cell area). Otherwise parameters are identical to theis
command, but uses thumbnail generation to make a fast to load but low resolution version (cached) of the media. -
it[CW;H;LINK\nFULL-PATH-OR-URL]
insert Thumb media with link (thumbnail cell area). Otherwise parameters are identical to theis
command, but uses thumbnail generation to make a fast to load but low resolution version (cached) of the media.LINK
is a path (or url) to open when the thumb is clicked on by the user. -
ij[CW;H;FULL-PATH\nGROUP][\n][cmd1][\r\n][cmd2]...
insert Edje object with file path given, and the group name given. The command list (and the\n
whitespace delimiter before the list) is optional, but is executed/parsed before display of the actual object to do things like initialize its initial state. SeeiC
command for more details on the command list.Be aware that once you have an object with an assigned channel id, it can send back signals and messages via escapes on stdin. These escapes will follow terminology extended escape format
(ESC + } ... \000)
, and the content will be one of:;CHID\ndrag\nPART NAME\nVAL1\nVAL2
;CHID\ndrag,start\nPART NAME\nVAL1\nVAL2
;CHID\ndrag,stop\nPART NAME\nVAL1\nVAL2
;CHID\ndrag,step\nPART NAME\nVAL1\nVAL2
;CHID\drag,set\nPART NAME\nVAL1\nVAL2
signal;CHID\nSIGNAL STRING\nSOURCE STRING
message;CHID\nOPCODE ID\nstring\nSTRING1
message;CHID\nOPCODE ID\nint\nINT1
message;CHID\nOPCODE ID\nfloat\nFLOAT1
message;CHID\nOPCODE ID\nstring_set\nSTRING1\nSTRING2\nSTRING3...
message;CHID\nOPCODE ID\nint_set\nINT1\nINT2\nINT3...
message;CHID\nOPCODE ID\nfloat_set\nFLOAT1\nFLOAT2\nFLOAT3...
message;CHID\nOPCODE ID\nstring_int\nSTRING1\nINT1
message;CHID\nOPCODE ID\nstring_float\nSTRING1\nFLOAT1
message;CHID\nOPCODE ID\nstring_int_set\nSTRING1\nINT1\nINT2\nINT3...
message;CHID\nOPCODE ID\nstring_float_set\nSTRING1\nFLOAT1\nFLOAT2\nFLOAT3...
-
iC[CHID]\n[cmd1][\r\n][cmd2][\r\n][cmd3]...
send a Command (cmd1
,cmd2
,cmd3
etc.) to an existing named channel idCHID
. this can be a list of 1 or more command strings, with each string broken by a continuous sequence of 1 or more\r
and/or\n
characters. e.g.\n
,\r
,\r\n
,\n\r
,\n\r\n\n\n
, etc.commands understood are:
-
text\nPART NAME\nTEXT STRING
set the text ofPART NAME
to stringTEXT STRING
-
emit\nSIGNAL STRING\nSOURCE STRING
emit signalSIGNAL STRING
SOURCE STRING
-
drag\nPART NAME\n[value|size|step|page]\nVAL1\nVAL2
manipulate dragable of namePART NAME
and either setvalue
,size
,step
orpage
properties toVAL1
andVAL2
forx
andy
, whereVAL1
andVAL2
are floating point values -
chid\nCHANNEL ID
set the channel id of a given edje object (only valid in setup commands for the inline edje object) toCHANNEL ID
so it can be addressed later. -
message\nOPCODE ID\n[string|int|float|string_set|int_set|...
float_set|string|int|string_float|string_int_set|...
string_float_set]\n[message data]
send a message with opcode (integer) idOPCODE ID
of one of the given types supported (string
,int
,float
, etc.) and then with the givenmessage data
at the end.message data
format depends on message type:-
string
:STRING1
-
int
:INT1
-
float
:FLOAT1
-
string_set
:STRING1\nSTRING2\nSTRING3...
-
int_set
:INT1\nINT2\nINT3...
-
float_set
:FLOAT1\nFLOAT2\nFLOAT3...
-
string_int
:STRING1\nINT1
-
string_float
:STRING1\nFLOAT1
-
string_int_set
:STRING1\nINT1\nINT2\nINT3...
-
string_float_set
:STRING1\nFLOAT1\nFLOAT2\nFLOAT3...
-
-
-
ib
begin media replace sequence run -
ie
end media replace sequence run -
fr[PATH/FILE]
begin file send for a file namedPATH
/FILE
-
fs[SIZE_BYTES]
set the size in bytes of a file send started with the above fr escape -
fd[CHECKSUM DATA]
block of data for the current file transfer with checksum as a string decimal which is the sum of every byte when taken as an unsigned char per byte. the checksum is a signed 32bit integer. the checksum is the sum of the data after escaping. 4 bits at a time per data byte, encoded with high bits in one byte then low bits, with the bits encoded as 4 bit value being0x40
+ 4 bit value per byte.(@ == 0x0, A == 0x1, B == 0x2, ... N == 0xe, O == 0xf)
. so to rebuild a byte will be(((bytes[0] - 0x40) & 0xf) << 4) | ((bytes[1] - 0x40) & 0xf)
per byte pair in the data block. -
fx
exit file send mode (normally at the end of the file or when it's complete)