GliaX / Tourniquet
Licence: gpl-3.0
3D printed tourniquet to stop bleeding, especially related to penetrating injuries
Stars: ✭ 59
NOT FOR CLINICAL USE Tourniquet
While we are working very hard to prepare this tourniquet for clinical use, we do not consider it ready yet. Please do not deploy this unless you are in a crisis situation and know exactly what you are doing. 3D printed tourniquet to stop bleeding, especially related to penetrating injuries
Print settings
-
Material: ABS
-
Layer Height: 0.2 mm
-
Infill: 100%
-
Bed temperature: 100 Cْ temp. at the first layer to avoid warping.
-
Supports: The buckle and rod need to be printed with support. Make sure there is no support on the holder part.
-
Vertical shells:
- Buckle: 2 perimeters
- Holder and rod: 4 perimeters
-
Horizontal shells: Print all parts with 2 top and 2 bottom horizontal shell thickness. Holder and rod should have 4 top and 4 bottom.
Note that the project description data, including the texts, logos, images, and/or trademarks,
for each open source project belongs to its rightful owner.
If you wish to add or remove any projects, please contact us at [email protected].