172 Open source projects that are alternatives of or similar to SoapyBladeRF

Soapy SDR plugin for SDRPlay

Soapy SDR plugin for Audio devices

Soapy SDR plugin for SDRPlay APIv3

Pothos framework support for software defined radio hardware.

RFSec tools

SatNOGS GNU Radio Out-Of-Tree Module

GNU Radio OOT module for demodulating and decoding ADS-B packets

Soapy SDR plugins for Osmo supported SDR devices

Universal Radio Hacker: Investigate Wireless Protocols Like A Boss

GNU Radio – the Free and Open Software Radio Ecosystem

🥧 The SDR Linux Distro for the Raspberry Pi and other SBC. Compatible out of the box with multiple SDR.

The GNU Radio 4.0 Runtime Proof Of Concept

A GNU Radio implementation of HD Radio (NRSC-5)

OpenCL/GPU-enabled common blocks for GNURadio

Software-defined radio receiver application built on GNU Radio with a web-based UI and plugins. In development, usable but incomplete. Compatible with RTL-SDR.

Records calls from a Trunked Radio System (P25 & SmartNet)

GNSS-SDR, an open-source software-defined GNSS receiver

Software defined radio receiver powered by GNU Radio and Qt.

Educational software for use with the LimeSDR platform

SoapySDR HackRF module

RFSec-ToolKit is a collection of Radio Frequency Communication Protocol Hacktools.无线通信协议相关的工具集，可借助SDR硬件+相关工具对无线通信进行研究。Collect with ♥ by HackSmith

GNURadio stereo FM receiver and RDS decoder

SDR DSP utilities embedded in Haskell

SoapySDR RTL-SDR Support Module

GNU Radio Android Toolchain

GNU Radio module for Reed Solomon coded CCSDS frames

Software defined radio receiver powered by GNU Radio and Qt.

No description or website provided.

This package provides GNUradio OOT modules and grc flowgraphs that fascilates Radio Astronomy Observations with software defined radio devices.

Multi-architecture readsb-protobuf container with support for RTLSDR, bladeRF and plutoSDR (x86_64, arm32v7, arm64v8)

Opensat first generation cubesat bus, launch into orbit at 2016/11/11

An open source 3GPP LTE implementation.

Vendor and platform neutral SDR support library.

Multimode SDR transceiver for GNU radio

GNURadio blocks to remove that IQ DC spike just like some software and drivers do! Three techniques available: auto, auto-tune to dc offset, and manual.

This repository includes the UHF specifications for Quetzal-1, information on demodulating and decoding beacons from the satellite, as well as a graphical application to view beacon data.

✈️ Rust ADS-B decoder + tui radar application

Decodes VOR signal from WAV file to get the bearing to your position

Multichannel AM/NFM demodulator

A voice inversion descrambler (and scrambler).

dump everything your rtl-sdr receives on 433MHz into an InfluxDB for easy graphing -- superseded by `rtl433 -F influx`

Embedded firmware for ham radio transceivers

a 2.4 GHz SDR neighbor using 1 bit ADC

DDC/DUC SDR Tranceiver project

GNURadio block for spectrum visualization using GPU; mirror of https://gitea.osmocom.org/sdr/gr-fosphor

CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR

FALCON - Fast Analysis of LTE Control channels

📻 amateur radio receiver in <100 code lines

📡 Using Software Designed Radio to transmit MIMO-OFDM QPSK signals at 5 GHz

Communications blocks and support libraries

Create and transmit AIS frames via gnuradio toolchain and web application in browser. Provides a websocket to PDU message block to change frame content on runtime. Works in burst mode, a frame is send on change immediately, one time. Transmitter remains silent until next change event.

OscillatorIMP ecosystem for the digital characterization of ultrastable oscillators and Software Defined Radio (SDR) frontend processing

bare bone Hierarchial Temporal Memory

A generic satellite data processing software.

A network remote control plugin for SDRSharp.

PLUTO-GPS-SIM generates a GPS baseband signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADALM-Pluto.

4G LTE software radio implementation for radio amateurs

Additional PyBOMBS recipes that aren't in gr-recipes

Minimal SDR with Lattice MachXO2 FPGA. And a port to Cyclone3 by Steven Groom

NFC signal and protocol analyzer using SDR receiver