Adaptive Lighting component for Home Assistant

Try out this code by adding https://github.com/basnijholt/adaptive-lighting to your custom repos in HACS (Home Assistant Community Store) and install it! This custom_component is also being added to core, see this PR, although it might take months before it makes it in.

The adaptive_lighting platform changes the settings of your lights throughout the day. It uses the position of the sun to calculate the color temperature and brightness that is most fitting for that time of the day. Scientific research has shown that this helps to maintain your natural circadian rhythm (your biological clock) and might lead to improved sleep, mood, and general well-being.

In practical terms, this means that after the sun sets, the brightness of your lights will decrease to a certain minimum brightness, while the color temperature will be at its coolest color temperature at noon, after which it will decrease and reach its warmest color at sunset. Around sunrise, the opposite will happen.

Additionally, the integration provides a way to define and set your lights in "sleep mode". When "sleep mode" is enabled, the lights will be at a minimal brightness and have a very warm color.

The integration creates 4 switches (in this example the component's name is "living_room"):

1. switch.adaptive_lighting_living_room, which turns the Adaptive Lighting integration on or off. It has several attributes that show the current light settings.
2. switch.adaptive_lighting_sleep_mode_living_room, which when activated, turns on "sleep mode" (you can set a specific sleep_brightness and sleep_color_temp).
3. switch.adaptive_lighting_adapt_brightness_living_room, which sets whether the integration should adapt the brightness of the lights (if supported by the light).
4. switch.adaptive_lighting_adapt_color_living_room, which sets whether the integration should adapt the color of the lights (if supported by the light).

Taking back control

Although having your lights automatically adapt is great most of the time, there might be times at which you want to set the lights to a different color/brightness and keep it that way. For this purpose, the integration (when take_over_control is enabled) automatically detects whether someone (e.g., person toggling the light switch) or something (automation) changes the lights. If this happens and the light is already on, the light that was changed gets marked as "manually controlled" and the Adaptive Lighting component will stop adapting that light until it turns off and on again (or if you use the service call adaptive_lighting.set_manual_control). This mechanism works by listening to all light.turn_on calls that change the color or brightness and by noting that the component did not make the call. Additionally, there is an option to detect all state changes (when detect_non_ha_changes is enabled), so also changes to the lights that were not made by a light.turn_on call (e.g., through an app or via something outside of Home Assistant.) It does this by comparing a light's state to Adaptive Lighting's previously used settings. Whenever a light gets marked as "manually controlled", an adaptive_lighting.manual_control event is fired, such that one can use this information in automations.

Configuration

This integration is both fully configurable through YAML and the frontend. (Configuration -> Integrations -> Adaptive Lighting, Adaptive Lighting -> Options) Here, the options in the frontend and in YAML have the same names.

# Example configuration.yaml entry
adaptive_lighting:
  lights:
    - light.living_room_lights

Options

Full example:

# Example configuration.yaml entry
adaptive_lighting:
- name: "default"
  lights: []
  prefer_rgb_color: false
  transition: 45
  initial_transition: 1
  interval: 90
  min_brightness: 1
  max_brightness: 100
  min_color_temp: 2000
  max_color_temp: 5500
  sleep_brightness: 1
  sleep_color_temp: 1000
  sunrise_time: "08:00:00"  # override the sunrise time
  sunrise_offset:
  sunset_time:
  sunset_offset: 1800  # in seconds or '00:15:00'
  take_over_control: true
  detect_non_ha_changes: false
  only_once: false

Services

adaptive_lighting.apply applies Adaptive Lighting settings to lights on demand.

adaptive_lighting.set_manual_control can mark (or unmark) whether a light is "manually controlled", meaning that when a light has manual_control, the light is not adapted.

Automation examples

Reset the manual_control status of a light after an hour.

- alias: "Adaptive lighting: reset manual_control after 1 hour"
  mode: parallel
  trigger:
    platform: event
    event_type: adaptive_lighting.manual_control
  variables:
    light: "{{ trigger.event.data.entity_id }}"
    switch: "{{ trigger.event.data.switch }}"
  action:
    - delay: "01:00:00"
    - condition: template
      value_template: "{{ light in state_attr(switch, 'manual_control') }}"
    - service: adaptive_lighting.set_manual_control
      data:
        entity_id: "{{ switch }}"
        lights: "{{ light }}"
        manual_control: false

Toggle multiple Adaptive Lighting switches to "sleep mode" using an input_boolean.sleep_mode.

- alias: "Adaptive lighting: toggle 'sleep mode'"
  trigger:
    - platform: state
      entity_id: input_boolean.sleep_mode
    - platform: homeassistant
      event: start  # in case the states aren't properly restored
  variables:
    sleep_mode: "{{ states('input_boolean.sleep_mode') }}"
  action:
    service: "switch.turn_{{ sleep_mode }}"
    entity_id:
      - switch.adaptive_lighting_sleep_mode_living_room
      - switch.adaptive_lighting_sleep_mode_bedroom

Other

See the documentation of the PR at https://deploy-preview-14877--home-assistant-docs.netlify.app/integrations/adaptive_lighting/ and this video on Reddit to see how to add the integration and set the options.

This integration was originally based of the great work of @claytonjn https://github.com/claytonjn/hass-circadian_lighting, but has been 100% rewritten and extended with new features.

Having problems?

Please enable debug logging by putting this in configuration.yaml:

logger:
  default: warning
  logs:
    custom_components.adaptive_lighting: debug

and after the problem occurs please create an issue with the log (/config/home-assistant.log).

Graphs!

These graphs were generated using the values calculated by the Adaptive Lighting sensor/switch(es).

Sun Position:

Color Temperature:

Brightness: