English | 简体中文 | 繁體中文 | 日本語 | Deutsch | 한국어
LibDriver BMP388
The BMP388 is a digital sensor with pressure and temperature measurement based on proven sensing principles.The sensor module is housed in an extremely compact 10-pin metal-lid LGA package with a footprint only 2.0 x 2.0 mm2 and max 0.8 mm package height. Its small dimensions and its low power consumption of 3.4 uA@1Hz allow the implementation in battery driven devices such as mobile phones ,GPS modules or watches.
LibDriver BMP388 is a full function driver of BMP388 launched by LibDriver.It provides continuous reading of pressure and temperature, single reading of pressure and temperature, interrupt reading, FIFO acquisition and other functions. LibDriver is MISRA compliant.
Table of Contents
Instruction
/src includes LibDriver BMP388 source files.
/interface includes LibDriver BMP388 IIC, SPI platform independent template.
/test includes LibDriver BMP388 driver test code and this code can test the chip necessary function simply.
/example includes LibDriver BMP388 sample code.
/doc includes LibDriver BMP388 offline document.
/datasheet includes BMP388 datasheet.
/project includes the common Linux and MCU development board sample code. All projects use the shell script to debug the driver and the detail instruction can be found in each project's README.md.
Install
Reference /interface IIC, SPI platform independent template and finish your platform IIC, SPI driver.
Add /src, /interface and /example to your project.
Usage
example basic
#include "driver_bmp388_basic.h"
uint8_t res;
uint8_t i;
float temperature_c;
float pressure_pa;
res = bmp388_basic_init(BMP388_INTERFACE_IIC, BMP388_ADDRESS_ADO_LOW);
if (res != 0)
{
return 1;
}
...
for (i = 0; i < 3; i++)
{
bmp388_interface_delay_ms(1000);
res = bmp388_basic_read((float *)&temperature_c, (float *)&pressure_pa);
if (res != 0)
{
(void)bmp388_basic_deinit();
return 1;
}
bmp388_interface_debug_print("bmp388: temperature is %0.2fC.\n", temperature_c);
bmp388_interface_debug_print("bmp388: pressure is %0.2fPa.\n", pressure_pa);
...
}
...
(void)bmp388_basic_deinit();
return 0;example shot
#include "driver_bmp388_shot.h"
uint8_t res;
uint8_t i;
float temperature_c;
float pressure_pa;
res = bmp388_shot_init(BMP388_INTERFACE_IIC, BMP388_ADDRESS_ADO_LOW);
if (res != 0)
{
return 1;
}
...
for (i = 0; i < 3; i++)
{
bmp388_interface_delay_ms(1000);
res = bmp388_shot_read((float *)&temperature_c, (float *)&pressure_pa);
if (res != 0)
{
(void)bmp388_shot_deinit();
return 1;
}
bmp388_interface_debug_print("bmp388: temperature is %0.2fC.\n", temperature_c);
bmp388_interface_debug_print("bmp388: pressure is %0.2fPa.\n", pressure_pa);
...
}
...
(void)bmp388_shot_deinit();
return 0;example interrupt
#include "driver_bmp388_interrupt.h"
uint8_t res;
uint16_t i, timeout;
uint8_t gs_data_ready_flag;
float gs_temperature_c;
float gs_pressure_pa;
void bmp388_interrupt_receive_callback(uint8_t type)
{
switch (type)
{
case BMP388_INTERRUPT_STATUS_FIFO_WATERMARK :
{
break;
}
case BMP388_INTERRUPT_STATUS_FIFO_FULL :
{
break;
}
case BMP388_INTERRUPT_STATUS_DATA_READY :
{
/* read temperature pressure */
if (bmp388_interrupt_read((float *)&gs_temperature_c, (float *)&gs_pressure_pa) != 0)
{
bmp388_interface_debug_print("bmp388: read temperature and pressure failed.\n");
return;
}
gs_data_ready_flag = 1;
break;
}
default :
{
break;
}
}
}
res = gpio_interrupt_init();
if (res != 0)
{
return 1;
}
res = bmp388_interrupt_init(BMP388_INTERFACE_IIC, BMP388_ADDRESS_ADO_LOW, bmp388_interrupt_receive_callback);
if (res != 0)
{
(void)gpio_interrupt_deinit();
return 1;
}
...
gs_data_ready_flag = 0;
timeout = 5000;
for (i = 0; i < 3; i++)
{
while (timeout != 0)
{
bmp388_interface_delay_ms(100);
timeout--;
if (gs_data_ready_flag != 0)
{
break;
}
if (timeout == 0)
{
(void)gpio_interrupt_deinit();
(void)bmp388_interrupt_deinit();
return 1;
}
}
gs_data_ready_flag = 0;
timeout = 5000;
bmp388_interface_debug_print("bmp388: temperature is %0.2fC.\n", gs_temperature_c);
bmp388_interface_debug_print("bmp388: pressure is %0.2fPa.\n", gs_pressure_pa);
...
}
...
(void)gpio_interrupt_deinit();
(void)bmp388_interrupt_deinit();
return 0;example fifo
#include "driver_bmp388_fifo.h"
uint8_t gs_fifo_full_flag;
uint8_t gs_fifo_watermark_flag;
uint16_t i, timeout;
uint8_t gs_buf[512];
bmp388_frame_t gs_frame[256];
void bmp388_fifo_receive_callback(uint8_t type)
{
switch (type)
{
case BMP388_INTERRUPT_STATUS_FIFO_WATERMARK :
{
uint8_t res;
uint16_t len;
uint16_t i, frame_len;
len = 512;
frame_len = 256;
res = bmp388_fifo_read(gs_buf, len, (bmp388_frame_t *)gs_frame, (uint16_t *)&frame_len);
if (res != 0)
{
bmp388_interface_debug_print("bmp388: fifo read failed.\n");
return;
}
for (i = 0; i < frame_len; i++)
{
if (gs_frame[i].type == BMP388_FRAME_TYPE_TEMPERATURE)
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: temperature is %0.2fC.\n", gs_frame[i].data);
}
else if (gs_frame[i].type == BMP388_FRAME_TYPE_PRESSURE)
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: pressure is %0.2fPa.\n", gs_frame[i].data);
}
else if (gs_frame[i].type == BMP388_FRAME_TYPE_SENSORTIME)
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: sensortime is %d.\n", gs_frame[i].raw);
}
else
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: unknow type.\n");
}
}
gs_fifo_watermark_flag = 1;
break;
}
case BMP388_INTERRUPT_STATUS_FIFO_FULL :
{
uint8_t res;
uint16_t len;
uint16_t i, frame_len;
len = 512;
frame_len = 256;
res = bmp388_fifo_read(gs_buf, len, (bmp388_frame_t *)gs_frame, (uint16_t *)&frame_len);
if (res != 0)
{
bmp388_interface_debug_print("bmp388: fifo read failed.\n");
return;
}
for (i = 0; i < frame_len; i++)
{
if (gs_frame[i].type == BMP388_FRAME_TYPE_TEMPERATURE)
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: temperature is %0.2fC.\n", gs_frame[i].data);
}
else if (gs_frame[i].type == BMP388_FRAME_TYPE_PRESSURE)
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: pressure is %0.2fPa.\n", gs_frame[i].data);
}
else if (gs_frame[i].type == BMP388_FRAME_TYPE_SENSORTIME)
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: sensortime is %d.\n", gs_frame[i].raw);
}
else
{
bmp388_interface_debug_print("bmp388: fifo %d/%d.\n", i+1, frame_len);
bmp388_interface_debug_print("bmp388: unknow type.\n");
}
}
gs_fifo_full_flag = 1;
break;
}
case BMP388_INTERRUPT_STATUS_DATA_READY :
{
break;
}
default :
{
break;
}
}
}
res = gpio_interrupt_init();
if (res != 0)
{
return 1;
}
res = bmp388_fifo_init(BMP388_INTERFACE_IIC, BMP388_ADDRESS_ADO_LOW, bmp388_fifo_receive_callback);
if (res != 0)
{
(void)gpio_interrupt_deinit();
return 1;
}
...
gs_fifo_watermark_flag = 0;
gs_fifo_full_flag = 0;
timeout = 5000;
for (i = 0; i < 3; i++)
{
while (timeout != 0)
{
bmp388_interface_delay_ms(100);
timeout--;
if ((gs_fifo_watermark_flag != 0) || (gs_fifo_full_flag != 0))
{
break;
}
if (timeout == 0)
{
(void)gpio_interrupt_deinit();
(void)bmp388_fifo_deinit();
return 1;
}
}
gs_fifo_watermark_flag = 0;
gs_fifo_full_flag = 0;
timeout = 5000;
...
}
(void)gpio_interrupt_deinit();
(void)bmp388_fifo_deinit();
...
return 0;Document
Online documents: https://www.libdriver.com/docs/bmp388/index.html
Offline documents: /doc/html/index.html
Contributing
Please sent an e-mail to [email protected]
License
Copyright (c) 2015 - present LibDriver All rights reserved
The MIT License (MIT)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
Contact Us
Please sent an e-mail to [email protected]