CPU Power Manager for Gnome Shell

Gnome-Shell Extension for controlling the frequency setting of your CPU

Prerequisites • Installation • Translating • Packaging • Developing

Prerequisites

You need to have a CPU which is supported by the cpufreq or intel_pstate CPU frequency scaling driver of the Linux kernel. This applies for most modern CPU's. Furthermore, the following software needs to be installed to use this extension:

• Gnome (since it's an extension)
• Policykit (ships default with gnome)
• For Intel Core CPU's intel_pstate needs to be enabled in the Linux kernel (should be the default in almost all Distros)
• For AMD Ryzen CPU's no further requirements are needed
• A POSIX compatible shell

Installation

Installing this extension can either be done via distribution packages provided by us (recommended) or via the Gnome extensions website (often outdated). Have a look at the options below to find the correct installation method for your system.

Info: The $ at the beginning of a line means that this line should be run as the user who is using the extension (most likely you). If you don't know what that means, just open up a terminal and use it as is. Commands are run as your user by default. So for the line $ echo Hello world you would type echo Hello world into your terminal and hit enter.

Info: The # at the beginning of a line means that this line must be run with root privileges (the name of the administrator account on Linux systems). So for the line # dnf update you would then e.g. run sudo dnf update in your terminal if your system uses sudo. Your system is most likely using sudo and if not you would know it.

$ sudo add-apt-repository ppa:fin1ger/cpupower
$ sudo apt-get update
$ sudo apt-get install gnome-shell-extension-cpupower

$ gnome-extensions enable [email protected]

$ sudo add-apt-repository ppa:fin1ger/cpupower
$ sudo apt-get update
$ sudo apt-get install gnome-shell-extension-cpupower

$ gnome-shell-extension-tool -e [email protected]

# apt-key adv --keyserver keyserver.ubuntu.com --recv-keys D76A018A2B4E77F5
# add-apt-repository 'deb http://ppa.launchpad.net/fin1ger/cpupower/ubuntu hirsute main'
# apt-get update
# apt-get install gnome-shell-extension-cpupower

$ gnome-extensions enable [email protected]

# dnf copr enable fin-ger/cpupower
# dnf install gnome-shell-extension-cpupower

$ gnome-extensions enable [email protected]

# zypper install gnome-shell-extension-cpupower

$ gnome-extensions enable [email protected]

$ gnome-extensions install /path/to/cpupower.zip

$ gnome-extensions enable [email protected]

You are a developer or sysadmin and are looking for ways to install this extension directly from the git repository? Read on! The section below will explain in detail how to do so.

Additional for prerequisites for Installation via Makefile

In order to use the Makefile you need the following packages:

• make
• gettext
• glib2 tools
• zip and unzip
• tar

Installing for another (admin) user

Impersonate the (admin) user, clone the git repository, and run the following command:

Note: Cloning and installing the extension while impersonating the other user, enables this user to install updates for this extension from extensions.gnome.org.

$ sudo -u username bash
$ cd /tmp
$ git clone https://github.com/deinstapel/cpupower.git
$ cd cpupower
$ make install PREFIX=/home/username/.local

Restart the gnome-shell (log out and back in) to make the extension available.

The user can enable the extension in his settings and install the polkit rule and cpufreqctl tool by using the included installation guide.

Uninstalling

The user can uninstall the tools in the settings of this extension. The extension itself can be removed from withing the extension settings or with this command:

$ make uninstall PREFIX=/home/username/.local

Installing for another (non-admin) user

Impersonate the (non-admin) user, clone the git repository, and run the following command:

Note: Cloning and installing the extension while impersonating the other user, enables this user to install updates for this extension from extensions.gnome.org. However, the tool must be updated and installed by an administrator. The extension may stop working after the user installed an update and may need updating of the tool by an administrator.

$ sudo -u username bash
$ cd /tmp
$ git clone https://github.com/deinstapel/cpupower.git
$ cd cpupower
$ make install PREFIX=/home/username/.local

And with an admin user run the following commands:

$ sudo make install-tool TOOL_SUFFIX=username

Note: Also, use this command to update the tool for another user in an outdated installation.

Note: Using another PREFIX than /usr in this setup might include security risks and may not work.

Restart the gnome-shell (log out and back in) to make the extension available.

The extension will work out-of-the-box for this user only!

Uninstalling

$ sudo make uninstall PREFIX=/home/username/.local
$ sudo make uninstall-tool TOOL_SUFFIX=username

Installing for all users

Clone the git repository and run the following command:

$ sudo make install install-tool

This will install the extensions, polkit rule, and the tool for all users on the system.

Uninstalling

Run the following command to uninstall:

$ sudo make uninstall uninstall-tool

Translating

cpupower now uses crowdin for translation. You are free to choose from manually translating this extension with tools like Poedit or using the online service of crowdin.

Translating with crowdin

First visit the project page of cpupower on crowdin and select the language you would like to translate to. Now, click on Translate All and you're good to go.

Manual translation method

In order to translate this extension with Poedit you first need to install it. You may use your distributions package manager for installation.

When finished, fork this project and clone like described in the linked guide.

Creating a new translation

Open Poedit and select File / New From POT/PO File... and select cpupower/locale/template.pot. Select the language you want to translate to. Now start translating.

Edit or update an existing translation

Open Poedit and select Open. Navigate to the cpupower/locale folder and select the language file (.po) you want to edit/update. Now select Catalog / Update from POT File... and select cpupower/locale/template.pot. Now, you can start updating the translation.

Saving your work

When finished save the file into the locale folder and push your changes to your fork. Now, you can create a pull request to make your translation available in the main cpupower installation.

Packaging

You are a package maintainer and looking into packaging this extension? Great! Below is a short summary of how to properly install this extension (run as root):

# make install install-tool PREFIX=/usr

This will install a polkit rule to /usr/share/polkit-1/actions/mko.cpupower.setcpufreq.policy and an executable bash script to /usr/bin/cpufreqctl. The extension is installed to /usr/share/gnome-shell/extensions/[email protected]. It still includes the scripts folder, the policykit rule template in data/mko.cpupower.policy.in, a useless copy of the tool in the tool folder, and the Makefile. These are included in the distribution of the extension to enable user installation if the extension got installed over the GNOME extensions website. If you do not want to distribute those files in your package, you can safely remove them.

If you find any issues in packaging this extension, please don't hesitate to report them!

Developing

Option 1

Clone the repository and run:

$ make install PREFIX=/home/username/.local

and reload the extension by restarting your gnome-shell.

Option 2

Clone the respository to ~/.local/share/gnome-shell/extensions/[email protected] and reload the extension by restarting your gnome-shell.

You can now enable the extension in your extension settings.

Viewing log output

$ journalctl /usr/bin/gnome-shell -f

Creating a new release

Only core contributors to this project can make a new release. To create one, run:

$ make release