🏠
Home Assistant configuration for a smart-looking place!
^{_{by René-Marc Simard 😃}}

Configuration for Home Assistant running on a Raspberry Pi for a one bedroom apartment, offering convenience automations over lights and climate while providing multiple intuitive user controls.

Be sure to ⭐️ or 🔱 my repo if you find it useful! 😃

Note: Images are from States UI days and still need to be updated in the documentation. This configuration now uses Lovelace UI and AppDaemon exclusively.

Table of contents 📑

1. TL;DR
2. Overview
   Goals | Agile development
3. Key features
   Climate control | Weather report | Lighting control | Presence and basic security | Modes and scenes | General information | Additional human interfaces
4. Setup
   Supporting hardware choices | Configuration | Systems and bridges | Physical devices | Software | Usage
5. License
6. Thanks

TL;DR 🏃

This is a fully documented working configuration for Home Assistant, with screenshots, hints and comments. Browse the code to have a look! 👀

🔝

Overview 🌅

Goals ⚽

• Inconspicuous: I love tech alright, but like any good butlers it should stay out of sight yet stay summonable. Think Fiji villa, not server room.
• Modular: Both code and devices should be easily replaceable.
• Internet independent: As much local processing as possible for the essential features.
• Accessible through multiple ways: Computers, tablet (kiosk), voice, smart phones, wireless buttons, remotes.
• Intuitive user interfaces: One look at a group of sensors/switches should be sufficient for anyone to understand the current states and how to operate an interface. 💡
• Redundant controls: Multiple interfaces should be able to control devices without interference. State changes from manual interventions or dedicated manufacturer apps should be tracked whenever possible.
• No information overload: Provide just enough insights to get an idea of what's going on. And no need for data that's best consumed on more interactive devices (like stock prices, Steam community status…)
• Not everything should be networked: Bathroom fan, pantry and laundry room lights have their independent motion sensors and that's a good thing. Same independence goes for the smoke detector: I sure don't want to require extensive skin grafts because I forgot an extra space in a YAML file. 😱
• No Alexa/Cortana/Google Voice: I don't want to have advertising agencies, online stores, or other AI-feeding Big Brother tech-monsters listening in to everything we say and do just for the dubious convenience of toggling lights by voice command. Privacy-centered, offline voice-control solutions like Mycroft, Rhasspy look far more appealing.

🔝

Agile development 🖖

This configuration is built with an Agile-like methodology, lead by following main user stories:

• As a resident I want a reliable home automation platform to handle lights and climate that can easily be controlled and overridden in many intuitive ways.
• As an apartment dweller I want to have a discrete, non-permanent installation that takes as little space as possible.
• As a developer I want to use an open-source platform that is feature-rich, accessible, flexible and actively maintained.
• As a consumer I want to pick and choose which devices I wish to acquire without necessarily being locked into a closed ecosystem.
• As a couple we want to be able to operate lights and climate-control appliances as well as get quick overview of weather forecasts and public transit schedules through simple to use interfaces.

Tasks are hopefully defined in the issue queue and their development progress is managed using a lightweight Kanban board.

🔝

Key features ✅

Climate control 🌡

• Temperature monitoring averaged and rounded to compensate for sensor calibration issues.
• Humidity monitoring also averaged and rounded.
• Low/High humidity status and alerts in case something is wrong with the humidifier.
• Mold conditions status and alert in case someone transformed the place into a steam room.
• Radon levels status and alert to monitor the indoor concentration of this cancer-causing radioactive gas.

🔝

Weather report ⛅

• Easy to read status and forecasts using Dark Sky data and only showcasing parameters that actually matter, shown in obvious ways.
• Outdoor air quality monitoring with numeric levels and human-friendly categorization for ozone, carbon monoxide, nitrogen dioxide, sulphur dioxide, 2.5μm particulate matter and UV light, averaged from multiple surrounding public local stations.
• Weather radar and satellite maps for local rain and snow from Environment Canada and regional air masses from the U.S. National Oceanic and Atmospheric Administration.
• See /misc/weather.yaml and /appdaemon/dashboards/.

🔝

Lighting control 💡

• Control for all pluggable lights, smart ones at /lights/ and basic ones using /switches/.
• Nanoleaf Aurora control:
  • Manual theme selection.
  • Automatically rotate through device-based themes based on time of day (unless manually selected above).
• LIFX Z bed underglow lights and ceiling wash lights control:
  • Manual theme selection.
  • Automatically rotate through cloud-based themes based on time of day (unless manually selected above).
• Automatically correlated colour temperature (CCT) for f.lux-like white temperature shift to gradually remove blue light based on a custom colour and brightness curve, not simply based on the sun …otherwise Canadian winters would be quite yellow!
• Motion-based nightlights where strategic lights fade in, dimmed very low, when movement is detected at night, say when someone wakes up to go the bathroom …again.
• See /lights/ and /automations/.

🔝

Presence and basic security 👮

• Cellphone device sensing to check who is currently home or away.
• Tamper monitoring in case a perimeter device has been played with.
• Water leak monitoring to be able to react quickly when a pipe breaks.
• Outdoor camera preview to see who is at the door.
• Opened door alert to know if someone left an exteral door open.
• Opened door indicators where a chime is played and a few lights change colour briefly and subtly when the front door opens/closes, say to indicate an oblivious showering partner that their better half has left or just came in.

🔝

Modes and scenes 🌈

• Mode based where unless a blocking mode is set, devices will turn on. Think of a river or a horse: tame it to keep it under control, but release the restraints and they will do their thing: 🐎
  • Quiet mode where noise makers know to stop or not to start.
  • Nap time mode that fades out lights in and near the bedroom and enables quiet mode.
  • Night mode fades out all lights outside of bedroom, enabling quiet mode too.
  • Low-power mode where each room knows which device should be on or off to achieve a more economical and calm state.
• Smart rooms that know which devices should be on or off based on the modes above. No need for heavy centralized control, let local managers handle their teams!
• Good morning action that releases all blocking modes, allowing all lights to turn on gradually, and noise-making devices are allowed to run if needed.
• Smart global scenes based on /scripts/ instead of scenes, to allow for sequences and conditions:
  • Movie scene turns on ambiance lighting and dims smart lights when playing a movie, then returns to standard automations when pausing/stopping.
  • Daylight/Gaming/Romantic global scenes fade in and out different lights, select effects and change light colours to set a perfect mood.

🔝

General information 🛎

• Local bus schedules with the next 3 departures. See /gtfs/ for optimization hints.
• Doomsday Clock in case egocentric psychopaths keep on playing Russian roulette with humanity's future.
• COVID-19 cases tracking to estimate how prevalent this darn Coronavirus is locally and elsewhere on Earth.
• Network status monitoring for latency, upspeed, downspeed, monthly consumption, WiFi status…
• Printer consumables monitoring to estimate how many pages can be printed properly.
• Home Assistant status monitoring for geek cred with average load, RAM use, disk use, uptime, and update availability. 🤓
• Daily audio greeting to start the day on a informed, uplifting note. See /automations/notifications/.
• GitHub repository monitoring to track community health metrics for related repos.

🔝

Additional human interfaces 📲

• Aeotec Minimote to quickly control global scenes and modes.
• Flic buttons on a nightstand and in the kitchen for triggering modes and controlling localized lights, depending on current states and click types.
• HADashboard for wall-mounted tablet, featuring indoor sensors reports, transit schedules, weather forecast and radar/sattelite maps, wrapped in an obvious navigation scheme for much UX goodness. Have a look at /appdaemon/dashboards/, you'll like! 😍
• Home Assistant Companion iPhone app for full UI access in the palm of my hand. Muahahaha!
• HomeKit for using some key sensors and devices with iPhones.

🔝

Setup 🔩

🔝

Supporting technical choices 🧱

• Raspberry Pi 3B+ for it's compatibility, low-power, good-enough performance, and affordable price.
• SSD via Sabrent USB adapter to increase IO performance while reducing chances of disk corruption versus microSD cards.
• Ubiquiti UniFi networking gear because forking over some dough for reliable, rock-solid prosumer equipment makes everything run smoothly. And because hearing one less complaint (dropped WiFi signal) from the girlfriend is priceless. 🤕
• Uninterruptible power supply to ride over transient power failures.
• WiFi for its cheapness, omnipresence and non requirement of vendor-specific hubs.
• Z-Wave for reliability and guaranteed interoperability between vendors (unlike Zigbee…)

🔝

Configuration ⚙

• Dedicated, firewalled VLAN (Virtual LAN) to segregate all IoT devices from other equipment …because I cannot trust that my vacuum cleaner won't go on a killing spree. Ever seen Runaway (1984) with Tom Selleck? Eek! 😱
• Local static IPs for all devices to minimize random drops.
• Local development on a local virtual machine using Python Virtual Env and Docker, then pulled with GIT on a Raspberry Pi.
• Plentiful documentation for my later self and to help out others.
• Shareable code with all identifiers kept in a non-committed, secrets.yaml file.

🔝

Systems and bridges 🌉

🔝

Physical devices 🔨

LED lights 💡 (see /lights/)

🔝

Sensors 📡 (see /sensors/)

🔝

Human interfaces 🕹️

🔝

Switches and other devices 🔌

🔝

Software 💻

🔝

Home Assistant add-ons ➕

🔝

Community integrations 🏘️

🔝

Lovelace widgets 💖

🔝

Usage 📘

In an empty directory, type:

git clone --recurse-submodules [email protected]:renemarc/home-assistant-config.git .

echo "secrets.yaml filter=secret merge=keepMine" > .gitattributes

cp secrets-dummy.yaml secrets.yaml

cp appdaemon/secrets-dummy.yaml appdaemon/secrets.yaml

Actual secrets and auto-generated sensitive files are obviously kept off this repo! 😉

🔝

License 📃

• Code and configuration is licensed under the Apache 2.0 License.
• Documentation is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) License.

🔝

Thanks 💕

Kudos to:

• The dedicated core team that builds and manages Home Assistant. They work fast and humbly.
• The horde of volunteer developers of all components and add-ons.
• The vibrant community, always willing to help and share code samples.
• The BRUH Automation YouTube channel, Ben's videos got me hooked on using Home Assistant.

Thank you for all your dedication, helpfulness and valuable insights. Cheers! 🍻😃

🔝

Don't forget to ⭐️ or 🔱 this repo! 😃