Handle Stripe Webhooks in a Laravel application

Stripe can notify your application of events using webhooks. This package can help you handle those webhooks. Out of the box it will verify the Stripe signature of all incoming requests. All valid calls will be logged to the database. You can easily define jobs or events that should be dispatched when specific events hit your app.

This package will not handle what should be done after the webhook request has been validated and the right job or event is called. You should still code up any work (eg. regarding payments) yourself.

Before using this package we highly recommend reading the entire documentation on webhooks over at Stripe.

Support us

We invest a lot of resources into creating best in class open source packages. You can support us by buying one of our paid products.

We highly appreciate you sending us a postcard from your hometown, mentioning which of our package(s) you are using. You'll find our address on our contact page. We publish all received postcards on our virtual postcard wall.

Upgrading to 2.0

Please see UPGRADING for details.

Installation

You can install the package via composer:

composer require spatie/laravel-stripe-webhooks

The service provider will automatically register itself.

You must publish the config file with:

php artisan vendor:publish --provider="Spatie\StripeWebhooks\StripeWebhooksServiceProvider" --tag="config"

This is the contents of the config file that will be published at config/stripe-webhooks.php:

return [
    /*
     * Stripe will sign each webhook using a secret. You can find the used secret at the
     * webhook configuration settings: https://dashboard.stripe.com/account/webhooks.
     */
    'signing_secret' => env('STRIPE_WEBHOOK_SECRET'),

    /*
     * You can define the job that should be run when a certain webhook hits your application
     * here. The key is the name of the Stripe event type with the `.` replaced by a `_`.
     *
     * You can find a list of Stripe webhook types here:
     * https://stripe.com/docs/api#event_types.
     */
    'jobs' => [
        // 'source_chargeable' => \App\Jobs\StripeWebhooks\HandleChargeableSource::class,
        // 'charge_failed' => \App\Jobs\StripeWebhooks\HandleFailedCharge::class,
    ],

    /*
     * The classname of the model to be used. The class should equal or extend
     * Spatie\StripeWebhooks\ProcessStripeWebhookJob.
     */
    'model' => \Spatie\StripeWebhooks\ProcessStripeWebhookJob::class,
    
    /*
     * When disabled, the package will not verify if the signature is valid.
     * This can be handy in local environments.
     */
    'verify_signature' => env('STRIPE_SIGNATURE_VERIFY', true),
];

In the signing_secret key of the config file you should add a valid webhook secret. You can find the secret used at the webhook configuration settings on the Stripe dashboard.

Next, you must publish the migration with:

php artisan vendor:publish --provider="Spatie\WebhookClient\WebhookClientServiceProvider" --tag="migrations"

After the migration has been published you can create the webhook_calls table by running the migrations:

php artisan migrate

Finally, take care of the routing: At the Stripe dashboard you must configure at what url Stripe webhooks should hit your app. In the routes file of your app you must pass that route to Route::stripeWebhooks:

Route::stripeWebhooks('webhook-route-configured-at-the-stripe-dashboard');

Behind the scenes this will register a POST route to a controller provided by this package. Because Stripe has no way of getting a csrf-token, you must add that route to the except array of the VerifyCsrfToken middleware:

protected $except = [
    'webhook-route-configured-at-the-stripe-dashboard',
];

Usage

Stripe will send out webhooks for several event types. You can find the full list of events types in the Stripe documentation.

Stripe will sign all requests hitting the webhook url of your app. This package will automatically verify if the signature is valid. If it is not, the request was probably not sent by Stripe.

Unless something goes terribly wrong, this package will always respond with a 200 to webhook requests. Sending a 200 will prevent Stripe from resending the same event over and over again. All webhook requests with a valid signature will be logged in the webhook_calls table. The table has a payload column where the entire payload of the incoming webhook is saved.

If the signature is not valid, the request will not be logged in the webhook_calls table but a Spatie\StripeWebhooks\WebhookFailed exception will be thrown. If something goes wrong during the webhook request the thrown exception will be saved in the exception column. In that case the controller will send a 500 instead of 200.

There are two ways this package enables you to handle webhook requests: you can opt to queue a job or listen to the events the package will fire.

Handling webhook requests using jobs

If you want to do something when a specific event type comes in you can define a job that does the work. Here's an example of such a job:

<?php

namespace App\Jobs\StripeWebhooks;

use Illuminate\Bus\Queueable;
use Illuminate\Queue\SerializesModels;
use Illuminate\Queue\InteractsWithQueue;
use Illuminate\Contracts\Queue\ShouldQueue;
use Spatie\WebhookClient\Models\WebhookCall;

class HandleChargeableSource implements ShouldQueue
{
    use InteractsWithQueue, Queueable, SerializesModels;

    /** @var \Spatie\WebhookClient\Models\WebhookCall */
    public $webhookCall;

    public function __construct(WebhookCall $webhookCall)
    {
        $this->webhookCall = $webhookCall;
    }

    public function handle()
    {
        // do your work here

        // you can access the payload of the webhook call with `$this->webhookCall->payload`
    }
}

We highly recommend that you make this job queueable, because this will minimize the response time of the webhook requests. This allows you to handle more stripe webhook requests and avoid timeouts.

After having created your job you must register it at the jobs array in the stripe-webhooks.php config file. The key should be the name of the stripe event type where but with the . replaced by _. The value should be the fully qualified classname.

// config/stripe-webhooks.php

'jobs' => [
    'source_chargeable' => \App\Jobs\StripeWebhooks\HandleChargeableSource::class,
],

Handling webhook requests using events

Instead of queueing jobs to perform some work when a webhook request comes in, you can opt to listen to the events this package will fire. Whenever a valid request hits your app, the package will fire a stripe-webhooks::<name-of-the-event> event.

The payload of the events will be the instance of WebhookCall that was created for the incoming request.

Let's take a look at how you can listen for such an event. In the EventServiceProvider you can register listeners.

/**
 * The event listener mappings for the application.
 *
 * @var array
 */
protected $listen = [
    'stripe-webhooks::source.chargeable' => [
        App\Listeners\ChargeSource::class,
    ],
];

Here's an example of such a listener:

<?php

namespace App\Listeners;

use Illuminate\Contracts\Queue\ShouldQueue;
use Spatie\WebhookClient\Models\WebhookCall;

class ChargeSource implements ShouldQueue
{
    public function handle(WebhookCall $webhookCall)
    {
        // do your work here

        // you can access the payload of the webhook call with `$webhookCall->payload`
    }
}

We highly recommend that you make the event listener queueable, as this will minimize the response time of the webhook requests. This allows you to handle more Stripe webhook requests and avoid timeouts.

The above example is only one way to handle events in Laravel. To learn the other options, read the Laravel documentation on handling events.

Advanced usage

Retry handling a webhook

All incoming webhook requests are written to the database. This is incredibly valuable when something goes wrong while handling a webhook call. You can easily retry processing the webhook call, after you've investigated and fixed the cause of failure, like this:

use Spatie\WebhookClient\Models\WebhookCall;
use Spatie\StripeWebhooks\ProcessStripeWebhookJob;

dispatch(new ProcessStripeWebhookJob(WebhookCall::find($id)));

Performing custom logic

You can add some custom logic that should be executed before and/or after the scheduling of the queued job by using your own model. You can do this by specifying your own model in the model key of the stripe-webhooks config file. The class should extend Spatie\StripeWebhooks\ProcessStripeWebhookJob.

Here's an example:

use Spatie\StripeWebhooks\ProcessStripeWebhookJob;

class MyCustomStripeWebhookJob extends ProcessStripeWebhookJob
{
    public function handle()
    {
        // do some custom stuff beforehand

        parent::handle();

        // do some custom stuff afterwards
    }
}

Handling multiple signing secrets

When using Stripe Connect you might want to the package to handle multiple endpoints and secrets. Here's how to configurate that behaviour.

If you are using the Route::stripeWebhooks macro, you can append the configKey as follows:

Route::stripeWebhooks('webhook-url/{configKey}');

Alternatively, if you are manually defining the route, you can add configKey like so:

Route::post('webhook-url/{configKey}', '\Spatie\StripeWebhooks\StripeWebhooksController');

If this route parameter is present the verify middleware will look for the secret using a different config key, by appending the given the parameter value to the default config key. E.g. If Stripe posts to webhook-url/my-named-secret you'd add a new config named signing_secret_my-named-secret.

Example config for Connect might look like:

// secret for when Stripe posts to webhook-url/account
'signing_secret_account' => 'whsec_abc',
// secret for when Stripe posts to webhook-url/connect
'signing_secret_connect' => 'whsec_123',

About Cashier

Laravel Cashier allows you to easily handle Stripe subscriptions. You may install it in the same application together with laravel-stripe-webhooks. There are no known conflicts.

Changelog

Please see CHANGELOG for more information about what has changed recently.

Testing

composer test

Contributing

Please see CONTRIBUTING for details.

Security

If you discover any security related issues, please email [email protected] instead of using the issue tracker.

Credits

• Freek Van der Herten
• All Contributors

A big thank you to Sebastiaan Luca who generously shared his Stripe webhook solution that inspired this package.

License

The MIT License (MIT). Please see License File for more information.