OpenCore-ASUS-ROG-MAXIMUS-XI-HERO

This repository contains:

• OpenCore configuration for ASUS ROG MAXIMUS XI HERO
• Helper script to create EFI directory
• EFI folder archive

Table of Contents

• Hardware list
• macOS
• OpenCore
  • Known Issues
  • ACPI
  • USB
  • Drivers
  • Kext
  • Resources
  • Tools
• BIOS Settings
• Installation
  • Download EFI folder archive from repository releases page
  • Create EFI directory and files helper script

Hardware list

Original hardware selection based on tonymacx86.com Stork's MyHero II Build

Other accessories:

macOS

macOS Ventura version 13.0 (22A380) with FileVault 2 enabled.

You may find great installation guide here.

OpenCore

• OpenCore 0.8.5
• Dortania OpenCore Install Guide
• Desktop Coffee Lake
• OpenCanopy
• FileVault

Known issues

Open: None.

Resolved:

• Fenvi T-919 Wi-Fi + Bluetooth 4.0 BCM94360CD started having issues mid-autumn 2020:

  • After shut down and then powering on PC again, Bluetooth will not work when logged in to macOS. However, it's fine at earlier stages, e.g., when typing password during the boot. Workaround: unplug and plug power cord after the shutdown.
  • Keyboard and trackpad were working unstable from time to time (input garbage, freezes). Workaround: power cycle keyboard and trackpad, reboot.

  Solution: (06-Dec-2020) Replaced Fenvi T-919 Wi-Fi + Bluetooth 4.0 BCM94360CD with Fenvi HB1200 Wi-Fi + Bluetooth 4.0 BCM4360.

• macOS Catalina version 10.15.7 started rebooting suddenly

  • MemTest86 revealed one BLS16G4D240FSB UDIMM to be faulty. Workaround: Remove faulty UDIMM.

  Solution: (30-Nov-2020) Ordered and replaced faulty UDIMM.

ACPI

As per Dortania OpenCore Install Guide, compiled SSDTs:

• SSDT-AWAC.aml
• SSDT-EC-USBX.aml
• SSDT-PLUG.aml
• SSDT-PMC.aml

USB

Based on Dortania USB Mapping Guide and Intel USB mapping.

USB port naming taken from this great reddit post.

Resulting USBMap.kext is used.

Drivers

• OpenCore - OpenCanopy.efi, OpenRuntime.efi, ResetNvramEntry.efi, ToggleSipEntry.efi
• OcBinaryData - HfsPlus.efi

Kext

• AppleALC 1.7.3
• IntelMausi 1.0.7
• Lilu 1.6.1
• VirtualSMC 1.3.0 (SMCProcessor.kext, SMCSuperIO.kext)
• WhateverGreen 1.6.0

Resources

• OpenCanopy theme - Acidanthera\GoldenGate
• OcBinaryData - Resources/

Tools

• OpenCore - OpenControl.efi, OpenShell.efi, ResetSystem.efi
• PassMark MemTest86

BIOS Settings

BIOS:

• Version 2004 from the download page.
• Settings backup.

BIOS settings based on Dortania Coffee Lake Intel BIOS settings recommendations:

• Advanced

  Submenu	Key / Value	Comment
  CPU Configuration	Software Guard Extensions (SGX): Disabled
  CPU Configuration	Intel (VMX) Virtualization Technology: Enabled	Required for Docker
  System Agent (SA) Configuration	VT-d: Enabled	Could be enabled as DisableIoMapper is set to true
  System Agent (SA) Configuration	Above 4G Decoding: Enabled
  USB Configuration	XHCI Hand-off: Enabled
  USB Configuration	Legacy USB Support: Enabled

• Boot

  Submenu	Key / Value	Comment
  Boot Configuration	Fast Boot: Disabled
  Boot Configuration	Boot Logo Display: Disabled
  Boot Configuration	Bootup NumLock State: Off	This is a matter of personal preferences
  Secure Boot	OS Type: Windows UEFI mode	Ensure Secure Boot state is in Disabled state. If this is not the case, navigate to Boot -> Secure Boot -> Key Management and select Clear Secure Boot Keys

Installation

There are two options to create EFI folder:

• Download EFI folder archive from repository releases page
• Create EFI directory and files with helper script

Download EFI folder archive from repository releases page

• Navigate to repository releases page and download tarball or zip package.
• Unarchive downloaded file locally
• Replace {{SERIAL}}, {{BOARDSERIAL}} and {{SMUUID}} with actual values in EFI/OC/config.plist. If you don't have one, great example on how to do this could be found here.
• Replace {{MACADDRESS}} with actual en0 MAC address value in EFI/OC/config.plist. Another great example on how to do it is here.
• Once done, mount EFI partition and copy EFI folder there.

Create EFI directory and files with helper script

Requirements:

• Bash > 4.0
• Coreutils > 8.15
• OpenSSL 1.1 (required for Wget)
• Wget

Should you use Homebrew on macOS, install it with

brew install bash coreutils [email protected] wget

To create EFI folder, there's no need to clone this repository, just run

bash -c "$(curl -fsSL raw.githubusercontent.com/vovinacci/OpenCore-ASUS-ROG-MAXIMUS-XI-HERO/master/create-efi.sh)"

This should download all necessary packages and extract files to the EFI folder in the current directory.

Two things to be done manually before moving everything to actual EFI partition:

• Replace {{SERIAL}}, {{BOARDSERIAL}} and {{SMUUID}} with actual values in EFI/OC/config.plist. If you don't have one, great example on how to do this could be found here.
• Replace {{MACADDRESS}} with actual en0 MAC address value in EFI/OC/config.plist. Another great example on how to do it is here.

After that, mount EFI partition and copy EFI folder there.