- EmuVariable is required for this (and most other Z390 boards), as the BIOS for these boards (which are based on a newer version of AMI Aptio) are not yet compatible with AptioMemoryFix in regards to nvram writing. So native nvram does not work under macOS currently.
- You may use the drivers and kexts I have posted here, but it's probably a better idea to download them new from the links below to make sure you have the latest.
- For Mojave 10.14.6 update, I had to clean install clover again on the drive and drop all the files back in. FYI just in case.
Fixes
ACPI patch to fix "AMFILoadTrustedKeysFromNVRam: no nvram variable" during installer boot.
Fix Phase 1 of installer stuck at 2 minutes remaining.
Fix Phase 2 of installer stuck at 13 minutes remaining.
BIOS Settings
AI Tweaker:
- Ai Overclock Tuner: XMP I (just for speed)
- ASUS MultiCore Enhancement: Auto
Advanced:
- Platform Misc Configuration (lower temperature of Radeon):
- PCI Express Native Power Management: Enabled
- Native ASPM: Enabled
- PCH DMI ASPM: Auto
- ASPM: Auto
- L1 Substates: L1.1 & L1.2
- PEG - ASPM: Auto
- CPU Configuration:
- Intel (VMX) Virtualization Technology: Enabled
- Hyper-Threading: Enabled
- CPU-Power Management Control:
- Intel SpeedStep: Enabled
- Intel Speed Shift: Enabled
- CFG Lock: Disabled
- System Agent (SA) Configuration
- VT-d: Disabled
- Above 4G Decoding: Disabled
- Graphics Configuration (Video Card only without Intel HD 630 iGPU hardware acceleration):
- Primary Display: PEG
- Graphics Configuration (Video Card + Intel HD 630 iGPU hardware acceleration):
- Primary Display: PCIE
- iGPU Multi-Monitor: Enabled
- DVMT Pre-Allocated: 32M
- RC6(Render Standby): Disabled
- PCH Configuration
- IOAPIC 24-119 Entries: Enabled
- PCH Storage Configuration
- SATA Controller(s): Disabled (if you have SDD NVMe)
- Onboard Devices Configuration
- HD Audio: Enabled
- USB power delivery in Soft Off state (S5): Disabled
- Serial Port Configuration
- Serial Port: Off
- USB Configuration
- Legacy USB Support: Enabled
- XHCI Hand-off: Enabled
- Network Stack Configuration
- Network Stack: Disabled
Boot:
- Boot Configuration
- Fast Boot: Disabled
- CSM (Compatibility Support Module)
- Launch CSM: Disabled
- Secure Boot
- OS Type: Other OS
Drivers
ApfsDriverLoader-64.efi
AptioInputFix-64.efi
AudioDxe-64.efi
DataHubDxe-64.efi
EmuVariableUefi-64.efi
FSInject-64.efi
OsxAptioFixDrv-64.efi (AptioMemoryFix-64 does not work well during install for this board)
HFSPlus-64.efi
PartitionDxe-64.efi
SMCHelper-64.efi
UsbKbDxe-64.efi
Kexts
AppleALC
FakeSMC (VirtualSMC does not work well with this board yet)
IntelMausiEthernet
Lilu
USBInjectAll
WhateverGreen
Config.plist
NOTE: I removed my Serial Number/SmUUID/CustomUUID from the SMBIOS & System Parameters section. Generate your own in Clover Configurator.