OpenWest 2015 Electronic Badge

OpenWest and theTransistor bring you another fun conference badge.

##Badge Parts List

• 1x Badge PCB
• 1x ATTiny85
• 1x 3xAAA Battery Holder
• 1x Push Button
• 1x Power Switch
• 5x RGB LEDs (WS2812b)
• 6x 0.1uF Capacitors, Ceramic

##Badge Add-On Kit Parts List

• 2x Button Board PCBs
• 1x Parallax Propeller mCU
• 1x 40 Pin Socket for mCU
• 1x 2.2inch SPI TFT Display
  • ILI9341 Controller
  • 320x240 Resolution
• 1x 5mhz Crystal Oscillator (mCU runs at 80mhz)
• 1x 24LC256 EEPROM
• 1x FTD434P MOSFET
• 1x 3.3v LDO Voltage Regulator
• 1x Tilt Switch
• 6x Push Buttons
• 1x Power Switch
• 10x 10k Resistors (labeled 103)
• 2x 10 ohm Resistors (labeled 100)
• 2x 1uF Ceramic Capacitors (with clear backing)
• 2x 0.1uF Ceramic Capacitors (with white backing)
• 1x 40 Pin Header Strip
• 1x SD to microSD Card Adapter
• 1x 128MB microSD Card

##Credits:

Electronics Work & Processing

• Compukidmike
• Devino

Original Design

• D3c4f

QA, Assembly, & Loading

• Animcogn
• Anthony (Demos)
• Trilog
• Nemus
• Evan (Sausage Assassin)
• Damon (Remote)
• Compukidmike
• Yukaia
• D3c4f
• ProgrammerQ
• aarobc (l3mur)
• Tyrel
• AJ Oneal
• Jay (GraySands)

Special Thanks

• MindJuJu
• OpenWest Core Team
• This wonderful community!

##Questions and Comments Questions and comments can be directed twards the following forms of communication:

• #dc801 on freenode
• d3c4f [at] thetransistor [dot] com