Myriad-RF Hardware
This repository contains the Myriad-RF reference hardware designs for Lime Microsystem's LMS6002D and LMS7002M transceivers, plus LMS8001 up/down converter, in PDF and KiCad formats, along with the associated firmware.
Contents
The directory structure for the hardware designs is as follows:
docs/ - platform documentation
<project>/hardware/<version>/
BOM/ - bill of materials spreadsheet
Gerbers/ - Gerber CAM files
KiCAD/ - KiCAD schematic and layout files
Manufacturing/ - Additional manufacturing information
PDF/ - Schematic and layout PDFs
Reports/ - DRC, ERC and drill reports
Documentation
- RFDIO Connector Specification
The Myriad-RF Radio Frequency Digital Input Output (RFDIO) connector specification defines the electrical and mechanical properties of a high speed card interface for Field Programmable Gate Array (FPGA) based carrier boards. This specification ensures interoperability between carrier (mother) boards and add-on (daughter) RF cards.
Please note that this needs to be updated with details of the connector specification used by the micro series of boards.
Myriad-RF 1 module (myriadrf-1)
Hardware design files for the LMS6002-based Myriad-RF 1 RF module.
Note that there are two versions of the design: one with vias in pads, and another with them off.
DE0-Nano Interface (de0nano-interface)
Hardware design files and firmware sources (FPGA HDL + Cypress FX2 code) for the DE0-Nano interface that is used with the original Myriad-RF 1 module.
Zipper Interface (zipper)
This interface allows the Myriad-RF 1 to be used with FPGA development boards that have either a HSMC or FMC connector.
Note that v1 of the hardware design was not made generally available.
uMyriadRF-6002 (umyriadrf-6002)
LMS6002 version of the micro form factor RF module.
uMyriadRF-7002 (umyriadrf-7002)
LMS7002 version of the micro form factor RF module.
MyriadRF-8001 (myriadrf-8001)
LMS8001 Companion.
Licensing
Hardware
The hardware designs are licensed under a Creative Commons Attribution 3.0 Unported licence.
Note: The Myriad-RF 1 and DE0-Nano Interface hardware designs were initially published under the Creative Commons Attribution-ShareAlike 3.0 Unported licence. As of 30th September 2013 these have been re-licensed under the more permissive Creative Commons Attribution 3.0 Unported licence.
Firmware
For details of firmware licensing please see the associated COPYING file(s).