316 Open source projects that are alternatives of or similar to arduino-bme280

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

Monitors the temperature, the humidity and the pressure in your room on Raspberry Pi.

Embedded SHT Drivers for Sensirion Temperature and Humidity Sensors - Download the Zip Package from the Release Page

Go·Hardware·Lean

Sample code for reading values from a BME280 temperature-humidity-pressure sensor, via ESP-IDF's I2C master driver, supports both normal mode and forced mode described in the datasheet. https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf

Indoor environment monitor based on Esp8266

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

JavaScript Robotics and IoT programming framework, developed at Bocoup.

Arduino compatible software for ESP8266 based environmental monitoring station. Includes temperature, humidity, barometric pressure and PM2.5, PM10 dust monitoring

System for measuring and displaying various values in caravans and motor homes, including climate values, filling levels and levelling data. MagicMirror (https://magicmirror.builders/) is used for presentation. A circuit board design is available now

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

Raspberry Pi Go Language Interface

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

sht31 full function driver

Arduino library for the SHT31 temperature and humidity sensor

Documents and Software Related to the famous CH341a used in I2C/SPI Flash Programmers also called as Bios Programmers

X-ray diffraction data analysis for high pressure and high temperature experiments

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

Barometric pressure, temperature, humidity and light sensing weather shield for Arduino.

Userinterface for Volumio (RaspberryPi) with ssd1322 and ssd1306 oled display, spectrum bargraph, progress bar, LED functions, Standby-functions, 4 Buttons and Rotary Encoder.

IOsonata multi-platform multi-architecture power & performance optimized software library for fast and easy IoT MCU firmware development. Object Oriented design, no board package to define, just pure plug & play any boards

Go drivers for pheripheral I/O on Linux.

ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.

ssd1306 Command Line Tool for Raspberry Pi

Interact with hardware in Elixir - GPIOs, I2C and SPI

Interact with I2C, SPI & GPIO devices using PowerShell Core!

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

Python module to drive a SSD1306 / SSD1309 / SSD1322 / SSD1325 / SSD1327 / SSD1331 / SSD1351 / SH1106 OLED

Arduino Uno, 433MhzRx and OS WMR86 Weather Station

Driver for the SSD1306 and SH1106 based 128x64, 128x32, 64x48 pixel OLED display running on ESP8266/ESP32

MicroPython driver for the Aosong AM2320 temperature and humidity sensor

All the Candle Arduino code

Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, or SPI

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

A tool for passive data capture and reconnaissance of serial flash chips. It is used in conjunction with a Saleae logic analyzer to reconstruct flash memory contents and extract contextual information about device operations.

🌀 Calculate apparent temperature using heat index, approximate wet-bulb globe temperature, humidex, australian apparent temperature and wind chill.

CO2, humidity and temperature sensor on ESP8266

Homebridge plugin to control Tion breezers

Java Device I/O library that is portable across Single Board Computers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.

Microcontroller projects (RPi, Arduino, ATTiny85, ESP, Pico, STM8/32)

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

Open Source Home Automation system for .NET

U8g2 for arm linux - a monochrome graphics library

GFX Demo for Arduino and the ESP-IDF

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

The driver for the microprocessor

Text library for TinyGo displays

STM32F103 logic analyzer and more

U8g2 for rt-thread - a monochrome graphics library

MPU9250 (MPU6500 + AK8963) I2C Driver in Python for Raspbery PI

CanAirIO is a citizen science initiative. We are developing a mobile application that is able to set a PM2.5 or CO2 sensors, and other related sensors, as a fixed station using WiFi or mobile station with an smartphone by using a Bluetooth connection.

Mocka - The complete testing framework for LUA and Nginx

Golang library to interact with liquid-crystal display driven by Hitachi HD44780 IC via I2C-bus driver from Raspberry PI.

openwrt for Khadas boards

PlatformIO Core Installer

MAX7219 full function driver for general MCU and Linux.

Marlyn based thermistor library for read temperature.

Manually submit weather station information to the APRS-IS network.