113 Open source projects that are alternatives of or similar to arduino-esp32

Fixed built-in I2C driver for Arduino ESP8266 core

Library to use i2c digital expander with arduino, esp8266 and esp32. Can read write digital value with only 2 wire (perfect for ESP-01).

U8g2 for rt-thread - a monochrome graphics library

Open Source Home Automation system for .NET

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

Java Device I/O library that is portable across Single Board Computers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.

Android Things open source peripheral drivers

Golang library to interact with liquid-crystal display driven by Hitachi HD44780 IC via I2C-bus driver from Raspberry PI.

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

Rust library for interfacing with i2c devices under Linux

Library for I2C EEPROM - 24LC256

Raspberry Pi Go Language Interface

I2C based soil moisture sensor

Arduino library for communicating with Nintendo extension controllers

RS485 ModBus tiny multi-sensor module

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

Turn your Raspberry Pi into an Oscilloscope/XY Plotter with Python

Advantech iManager Linux driver set for Advantech Embedded Boards

Library to use i2c analog IC with arduino and esp8266. Can read analog value and write analog value with only 2 wire (perfect for ESP-01).

STM32F103 logic analyzer and more

C# .NET - Arduino library supporting simultaneous serial ASCII, Firmata and I2C communication

I2C serial bus access with Node.js

Sample code for reading values from a BME280 temperature-humidity-pressure sensor, via ESP-IDF's I2C master driver, supports both normal mode and forced mode described in the datasheet. https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf

Platform-agnostic Rust driver for the PCA9685 I2C 16-channel, 12-bit PWM/Servo/LED controller

Raspberry Pi examples

STM32 HAL library for GY-521 (MPU6050) with Kalman filter

I2C for the MSP430 using the USI module. ➡️

Documents and Software Related to the famous CH341a used in I2C/SPI Flash Programmers also called as Bios Programmers

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

Go drivers for pheripheral I/O on Linux.

A library for esp32 i2c oled ssd1306

JavaScript Robotics and IoT programming framework, developed at Bocoup.

Realtek RTD2660/2662 programmer

Utility library for @-wire Lightning Web Component tests

A library for I2C communications for Linux devices (Beaglebone Black, Raspberry PI, and possibly others).

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

A node.js module for reading a BMP085 barometer sensor.

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

Python module to drive a SSD1306 / SSD1309 / SSD1322 / SSD1325 / SSD1327 / SSD1331 / SSD1351 / SH1106 OLED

🏗️ An I2C bootloader for Arduino.

JavaScript framework for robotics, drones, and the Internet of Things (IoT)

Menu creation Arduino library for LCDs, wraps LiquidCrystal.

Interact with hardware in Elixir - GPIOs, I2C and SPI

Example application

Передача показаний воды по Wi-Fi. Watermeter Wi-Fi transmitter.

Go·Hardware·Lean

The driver for the microprocessor

Software I2C implementation for Arduino and other Wiring-type environments

Repository for Sensirion humidity and temperature sensor support on Arduino

ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.

Debugging tool for I2C networks, built for STM32 microcontrollers

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

USI based TWI/I2C library for Arduino

Interact with I2C, SPI & GPIO devices using PowerShell Core!

Simple and responsive flexbox based Sass Framework

Golang library to interact with Bosch Sensortec BMP180/BMP280/BME280/BMP388 temperature, pressure and humidity sensors via I2C-bus from Raspberry PI.

Simple definitions of terms, acronyms, abbreviations, companies, and projects related to financial services and Moov.