1696 Open source projects that are alternatives of or similar to Awesome Canbus

🚜 unpretentious attempt to collect CAN IDs and payloads for various car brands/models in one place.

Lightweight dynamic memory manager library for embedded systems with memory constraints. It implements malloc, calloc, realloc and free functions

Non-blocking LED controlling library for Arduino and friends.

A simple library for building and parsing data frames for serial interfaces (like UART / RS232)

CVRA monorepo - All software running on our bots lives here

RunCPM is a multi-platform, portable, Z80 CP/M 2.2 emulator.

The free embedded operating system.

A Hardware abstraction layer for the stm32l432xx series chips written in rust.

A Rust embedded-hal HAL for all MCUs in the STM32 F7 family

Servo library with stm developed by the Liek Software Team. We are working on new versions.

IOsonata multi-platform multi-architecture power & performance optimized software library for fast and easy IoT MCU firmware development. Object Oriented design, no board package to define, just pure plug & play any boards

📝 Kernel module that can be used as a replacement for syslog, logger or logwrapper

Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. Can be used for monitoring low speed CAN (interior can bus of most cars, less than 500kbps). For higher speeds serial port can become a bottleneck in case data density is high.

A lightweight Arduino framework for Keil projects.

Espressif 8266: development platform for PlatformIO

A set of various projects based on ESP8266, ESP32, ATtiny13, ATtiny85, ATtiny2313, ATmega8, ATmega328, ATmega32, STM32 and more.

Stand alone program that Tracks/Logs all the opened websites in the Chrome Browser. Even incognito! *No need to install anything in browser*

Rust crate for FreeRTOS

DIY midi controller project

PJON (Padded Jittering Operative Network) is an experimental, arduino-compatible, multi-master, multi-media network protocol.

Open source STM32 MCU programming toolset

Arduino MCP2515 CAN interface library

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, etc.

An IoT Solution,Blinker library for embedded hardware. Works with Arduino, ESP8266, ESP32.

Передача показаний воды по Wi-Fi. Watermeter Wi-Fi transmitter.

PlatformIO is a professional collaborative platform for embedded development 👽 A place where Developers and Teams have true Freedom! No more vendor lock-in!

Tiny Erlang VM

Arduino Library to simplify working with buttons. It allows you to use callback functions to track single, double, triple and long clicks. It also takes care of debouncing.

Generic implementation of Arduino for STM32 boards

IoT program for Arduino Uno / STM32 Blue Pill (libopencm3) that reads BME280 temperature + humidity + altitude sensors, via I2C or SPI with DMA and multitasking. Sends sensor data to Sigfox via Wisol Sigfox module on UART. Runs on cocoOS task scheduling library http://www.cocoos.net

Logic Analyzer, for Arduino, AVR, ESP8266 and STM32 with a very nice working processing interface, you could run it also on any Android device.

ST STM32: development platform for PlatformIO

Multi-purpose serial data visualization & processing program

A serial port terminal that's got your back.

CAN driver and router

A lightweight, secure, easy-to-use crypto library suitable for constrained environments.

The Embedded SDKs for the Parse Platform

Hardware Library for the Daisy Audio Platform

Software for ROS Embedded board (a.k.a. OpenCR). OpenCR means Open-source Control Module for ROS.

bxCAN peripheral driver for STM32 chips

STM32 Base project with a lot of stuff

Fast, safe and easy to use Cortex-M HAL Library, written in C++ 17

Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI

No description or website provided.

Lightweight USB device and host stack for STM32 and other MCUs.

Lightweight communicating state machine framework for embedded systems

GUIslice drag & drop embedded GUI in C for touchscreen TFT on Arduino, Raspberry Pi, ARM, ESP8266 / ESP32 / M5stack using Adafruit-GFX / TFT_eSPI / UTFT / SDL

PlatformIO IDE for Atom: The next generation integrated development environment for IoT

📟 JSON library for Arduino and embedded C++. Simple and efficient.

Firmware for OWL devices

TCP/UDP Applicaton for UNO/MEGA/STM32 using ESP8266's AT firmware.

The Arduino IDE for advanced users and developers. Experimental alpha version.

Library to read time from Network Time Protocol (NTP) servers.

[For Arduino and STM32] Library for working with a NTC thermistor.

Sming - Open Source framework for high efficiency native ESP8266 development

Arduino and PlatformIO IDE compatible TFT library optimised for the STM32, ESP8266 and ESP32 that supports different driver chips

Abstractions for asynchronous programming on the STM32F1xx family of microcontrollers.

A curated list of awesome embedded programming.

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

STM32-OTA on Arduino IDE