933 Open source projects that are alternatives of or similar to BME680

💧 Arduino library for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The library allows using the sensor over I2C or SPI on any board that supports Arduino.

Embedded SHT Drivers for Sensirion Temperature and Humidity Sensors - Download the Zip Package from the Release Page

Read the BME680 sensor with the BSEC library on Linux (e.g. Raspberry Pi)

Barometric pressure, temperature, humidity and light sensing weather shield for Arduino.

Open Source Home Automation system for .NET

Arduino library for the SHT31 temperature and humidity sensor

ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.

Arduino compatible software for ESP8266 based environmental monitoring station. Includes temperature, humidity, barometric pressure and PM2.5, PM10 dust monitoring

Repository for Sensirion humidity and temperature sensor support on Arduino

Arduino Uno, 433MhzRx and OS WMR86 Weather Station

Arduino and CMake library for communicating with the Bosch Sensortec BME280 environmental sensor.

Monitors the temperature, the humidity and the pressure in your room on Raspberry Pi.

Homebridge plugin to control Tion breezers

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, or SPI

GFX Demo for Arduino and the ESP-IDF

Library for I2C EEPROM - 24LC256

The driver for the microprocessor

Interact with hardware in Elixir - GPIOs, I2C and SPI

A node.js module for reading a BMP085 barometer sensor.

STM32F103 logic analyzer and more

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

Raspberry Pi Go Language Interface

Driver for the SSD1306 and SH1106 based 128x64, 128x32, 64x48 pixel OLED display running on ESP8266/ESP32

Complete support of MCP23017

Menu creation Arduino library for LCDs, wraps LiquidCrystal.

ssd1306 Command Line Tool for Raspberry Pi

U8g2 for rt-thread - a monochrome graphics library

Interact with I2C, SPI & GPIO devices using PowerShell Core!

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

HTS221, LPS22, LIS2DW12, LIS2MDL, LSM6DSO, STTS751, bme280, bmp280, APDS9930, TM1650, TM1637, LCD1602, all kinds of micropython drives, examples, libs

Python module to drive a SSD1306 / SSD1309 / SSD1322 / SSD1325 / SSD1327 / SSD1331 / SSD1351 / SH1106 OLED

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

Userinterface for Volumio (RaspberryPi) with ssd1322 and ssd1306 oled display, spectrum bargraph, progress bar, LED functions, Standby-functions, 4 Buttons and Rotary Encoder.

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

Microcontroller projects (RPi, Arduino, ATTiny85, ESP, Pico, STM8/32)

Arduino library for communicating with Nintendo extension controllers

Go·Hardware·Lean

Library to use i2c digital expander with arduino, esp8266 and esp32. Can read write digital value with only 2 wire (perfect for ESP-01).

Documents and Software Related to the famous CH341a used in I2C/SPI Flash Programmers also called as Bios Programmers

A tool for passive data capture and reconnaissance of serial flash chips. It is used in conjunction with a Saleae logic analyzer to reconstruct flash memory contents and extract contextual information about device operations.

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

I2C based soil moisture sensor

Compass on Android

An updated version of the nws_alerts custom integration for Home Assistant

Selbstbau-Wetterstation für HomeMatic

Android library for temperature conversions and weather forecasts. Includes wrapper for OpenWeatherMap API

OpenWeatherMap Plugin for Homebridge

JavaScript Robotics and IoT programming framework, developed at Bocoup.

✈️ ☀️ R package for accessing ASOS data via the Iowa Environment Mesonet ☁️ ✈️

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

Arduino based 433MHz Tx and Rx combo using Manchester protocol

Software I2C implementation for Arduino and other Wiring-type environments

Library for the TLV493D-A1B6 3D magnetic sensor for Arduino.

Library to use i2c analog IC with arduino and esp8266. Can read analog value and write analog value with only 2 wire (perfect for ESP-01).

Top-level Arduino sketches for the MCCI Catena family of IoT LPWA Devices

Go drivers for pheripheral I/O on Linux.