170 Open source projects that are alternatives of or similar to Calculate-SNR-SDR

Software defined radio receiver powered by GNU Radio and Qt.

A simple DSP library and command-line tool for Software Defined Radio.

CentSDR: tiny handheld standalone software defined receiver with LCD display.

🥧 The SDR Linux Distro for the Raspberry Pi and other SBC. Compatible out of the box with multiple SDR.

IEEE 802.15.4 ZigBee Transceiver

library for turning a RTL2832 based DVB dongle into a Software DefinedReceiver; mirror from https://git.osmocom.org/rtl-sdr/

A GNU Radio implementation of HD Radio (NRSC-5)

KiwiSDR: BeagleBone web-accessible shortwave receiver and software-defined GPS

HamPi

This project is about creation of affordable and easy-to-manufacture prototypes of PCBs which are used to expand the capabilities of existing low-cost SDR receivers based on RTL2832U chip.

Intro to software-defined radio with LimeSDR workshop

Program to decode radio transmissions from devices on the ISM bands (and other frequencies)

GNU Radio – the Free and Open Software Radio Ecosystem

NOAA APT weather satellite image decoder, for Linux, Windows, RPi 2+ and OSX

SoapySDR RTL-SDR Support Module

PYNQ example of using the RFSoC as a QPSK transceiver.

Rdio Scanner is an interface similar to a police radio scanner for software defined radio recorders

An easy to use HRPT decoder.

A guide for using Python as a software-defined radio (SDR) framework, for extremely rapid development of SDR apps/research with beautiful GUIs

Soapy SDR plugin for the Blade RF

ACARS SDR decoder

4G LTE software radio implementation for radio amateurs

Software decoder for FM/AM broadcast radio with AirSpy R2 / Mini, Airspy HF+, and RTL-SDR

CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR

A frequency scanner for Gqrx Software Defined Radio receiver

Thrifty is proof-of-concept SDR software for TDOA positioning using inexpensive SDR hardware such as the RTL-SDR.

SDR Rx/Tx software for Airspy, Airspy HF+, BladeRF, HackRF, LimeSDR, PlutoSDR, RTL-SDR, SDRplay RSP1 and FunCube

FALCON - Fast Analysis of LTE Control channels

Power spectrum for RTLSDR dongles.

Minimal SDR with Lattice MachXO2 FPGA. And a port to Cyclone3 by Steven Groom

Software-defined radio receiver application built on GNU Radio with a web-based UI and plugins. In development, usable but incomplete. Compatible with RTL-SDR.

An enhanced, user-friendly version of nrsc5-gui that is not heavily dependent upon Python processing for audio generation.

📡 On-off keying tools for your SD-arrrR

dump everything your rtl-sdr receives on 433MHz into an InfluxDB for easy graphing -- superseded by `rtl433 -F influx`

Soapy SDR plugins for Osmo supported SDR devices

📻 amateur radio receiver in <100 code lines

Open source SDR 4G/5G software suite from Software Radio Systems (SRS)

PLUTO-GPS-SIM generates a GPS baseband signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADALM-Pluto.

Mirrored from git://git.osmocom.org/osmo-trx

Forked from Beagle_SDR_GPS for specialised add-on SDR board with 16-Bit ADC which improved from KiwiSDR.

VDL Mode 2 message decoder and protocol analyzer

Multipurpose RTL-SDR Framework for RTL2832 based DVB-T receivers

GNSS-SDR, an open-source software-defined GNSS receiver

Multi-architecture readsb-protobuf container with support for RTLSDR, bladeRF and plutoSDR (x86_64, arm32v7, arm64v8)

PandwaRF: RF analysis tool with a sub-1 GHz wireless transceiver controlled by a smartphone or

✈️ Rust ADS-B decoder + tui radar application

Spectrum analyzer for multiple SDR platforms (PyQtGraph based GUI for soapy_power, hackrf_sweep, rtl_power, rx_power and other backends)

Embedded firmware for ham radio transceivers

Readsb is a Mode-S/ADSB/TIS decoder for RTLSDR, BladeRF, Modes-Beast and GNS5894 devices.

a 2.4 GHz SDR neighbor using 1 bit ADC

Vendor and platform neutral SDR support library.

📡 Using Software Designed Radio to transmit MIMO-OFDM QPSK signals at 5 GHz

Multimon-ng pager message parser and viewer

The USRP™ Hardware Driver Repository

New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi standard. Supports DDR and SRD tranfser!

free5GRAN is an open-source 5G RAN stack. The current version includes a receiver which decodes MIB & SIB1 data. It also acts as a cell scanner. free5GRAN works in SA mode.

Notes on the Red Pitaya Open Source Instrument

PlutoSDR Firmware

First SDR platform for IoT networks

A lightweight, embeddable software-defined radio framework built on LuaJIT