993 Open source projects that are alternatives of or similar to embedded-ccs811-rs

Platform-agnostic Rust driver for the PCA9685 I2C 16-channel, 12-bit PWM/Servo/LED controller

Embedded i2c Driver for Sensirion Particulate Matter Sensors - Download the Zip Package from the Release Page

Repository for Sensirion humidity and temperature sensor support on Arduino

Embedded SHT Drivers for Sensirion Temperature and Humidity Sensors - Download the Zip Package from the Release Page

Command line configured kernel mode 1-wire bus master driver. w1-gpio standard Linux module enhancement/substitution.

MLX90632 library for the Melexis 90632 Infra Red temperature sensor.

Передача показаний воды по Wi-Fi. Watermeter Wi-Fi transmitter.

Rohde & Schwarz SCPI Driver (in Python)

Homebridge plugin to control Tion breezers

Drivers for InvenSense inertial measurement units MPU9250, MPU9150, MPU6050

HTS221, LPS22, LIS2DW12, LIS2MDL, LSM6DSO, STTS751, bme280, bmp280, APDS9930, TM1650, TM1637, LCD1602, all kinds of micropython drives, examples, libs

Android Things open source peripheral drivers

Embedded Hardware Abstraction Library

ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.

Driver for the SSD1306 and SH1106 based 128x64, 128x32, 64x48 pixel OLED display running on ESP8266/ESP32

Kinect2 Sensor Device Driver for Linux

MPU9250 (MPU6500 + AK8963) I2C Driver in Python for Raspbery PI

Bio Balance Detector's products aim to show the weak electromagnetic fields around every living being (including plants, animals and humans) and display it in a heat-map like hyper-spectral image.

Rust driver for the Semtech SX127x series of Sub-GHz LoRa/ISM radio transceivers

I2C based soil moisture sensor

IOsonata multi-platform multi-architecture power & performance optimized software library for fast and easy IoT MCU firmware development. Object Oriented design, no board package to define, just pure plug & play any boards

embedded-hal implementation for Rust on ESP32 and ESP-IDF

嵌入式linux软件开发、嵌入式linux驱动开发、c语言、单片机开发、IOT开发等面试要点记录

TFT and touch pad drivers for LVGL embedded GUI library

Rust library for interfacing with i2c devices under Linux

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

CO2-Ampel / CO2-Traffic-Light to measure and show the carbon dioxide concentration in a room, based on Sensirion SCD30/SCD4x sensor and Microchip SAMD21 microcontroller

Arduino driver for CCS811 digital gas sensor

Library for interfacing with VL53L0X time-of-flight distance sensor under Linux

Arduino imeplementation for CO2 sensors of the MH-Z series (Intelligent Infrared CO2 Module)

Open Source Home Automation system for .NET

A node.js module for reading a BMP085 barometer sensor.

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

Particle sensor manager for multiple sensors: Honeywell, Plantower, Panasonic, Sensirion, etc. This is sensors layer of CanAirIO project too.

no_std crate for parsing AT commands

[New Version] This is FAT32 FileSystem Library, which is #![no_std] and does not use alloc.

An implementation of a ANT driver for Arduino, Mbed and ESP-IDF

Utilities add-in for the Casio Prizm (fx-CG 10 and 20)

A simple, single-future, non-blocking executor intended for building state machines. Designed to be no-std and embedded friendly.

STM32 Base project with a lot of stuff

miZy - tiny fast embedded linux

Point Grey (FLIR) Spinnaker based camera driver (Blackfly S etc.)

Python Bluetooth low energy observer example for OMRON Environment Sensor (2JCIE-BL01)

Gismeteo Weather Provider for Home Assistant

An easy-to-use, fast, tracker-based, public domain sound driver for Game Boy homebrew

Web UI and plugins to manage Xiaomi MiHome gateway, sensors and smart devices.

Simple CO2 meter using Arduino UNO-Mega board and popular CO2 sensors (SenseAir S8, Sensirion SCD30, Winsen MH-Z14 or 19 and Cubic CM1106). Operation modes: Normal, Calibration 400ppm, Alarm adjust and Altitud compensation adjust

⚡ A Swift library for the I2C SHT20 Humidity and Temperature Sensor.

Peripheral Access Crate for the nRF52832 microcontroller

Driver for the Continental radar ARS_404 / ARS_408.

www.crowdsupply.com/capable-robot-components/programmable-usb-hub

Driver to program I2C based Onion Expansions

.NET Driver for ArangoDB

Arduino library and MATLAB/Simulink API for the AutomationShield Arduino expansion boards for control engineering education.

This tutorial provides one example on how a CI (Continuous Integration) workflow with the IAR Build Tools for Linux can be set up on GitHub. The IAR Build Tools on Linux are available for Arm, RISC-V and Renesas (RH850, RL78 and RX).

JPG decoder for LVGL

U8g2 for arm linux - a monochrome graphics library

Tensorflow for Orange PI Zero

Support for building ultra low power systems based on the Pyboard (1.x and D series).

A docker networking driver that transparently tunnels docker containers TCP traffic through a proxy