810 Open source projects that are alternatives of or similar to gfx_demo

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, or SPI

Driver for the SSD1306 and SH1106 based 128x64, 128x32, 64x48 pixel OLED display running on ESP8266/ESP32

Library to use i2c digital expander with arduino, esp8266 and esp32. Can read write digital value with only 2 wire (perfect for ESP-01).

ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

Library for I2C EEPROM - 24LC256

Server and software to use an ESP32 as a connected display

Arduino library for PM sensors with serial interface

A library for esp32 i2c oled ssd1306

ESP32 Frequency Counter using Pulse Counter and Remote Control modules

ssd1306 Command Line Tool for Raspberry Pi

STM32F103 logic analyzer and more

The driver for the microprocessor

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

U8g2 for rt-thread - a monochrome graphics library

U8g2 for arm linux - a monochrome graphics library

Raspberry Pi Go Language Interface

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

Interact with I2C, SPI & GPIO devices using PowerShell Core!

JavaScript Robotics and IoT programming framework, developed at Bocoup.

Documents and Software Related to the famous CH341a used in I2C/SPI Flash Programmers also called as Bios Programmers

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

Go drivers for pheripheral I/O on Linux.

Userinterface for Volumio (RaspberryPi) with ssd1322 and ssd1306 oled display, spectrum bargraph, progress bar, LED functions, Standby-functions, 4 Buttons and Rotary Encoder.

Sample code for reading values from a BME280 temperature-humidity-pressure sensor, via ESP-IDF's I2C master driver, supports both normal mode and forced mode described in the datasheet. https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf

Software I2C implementation for Arduino and other Wiring-type environments

IP over MQTT for ESP controllers and Linux

Repository for Sensirion humidity and temperature sensor support on Arduino

IOsonata multi-platform multi-architecture power & performance optimized software library for fast and easy IoT MCU firmware development. Object Oriented design, no board package to define, just pure plug & play any boards

Interact with hardware in Elixir - GPIOs, I2C and SPI

8bit parallel TFT & 4-line resistance touch screen Driver for esp-idf using i2s paralell mode

Arduino Library to access the MCP7940M, MCP7940N and MCP7940x Real-Time chips

Embedded OPC UA Server on ESP32 based on open62541 stack

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

Arduino library for communicating with Nintendo extension controllers

Python module to drive a SSD1306 / SSD1309 / SSD1322 / SSD1325 / SSD1327 / SSD1331 / SSD1351 / SH1106 OLED

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

Complete support of MCP23017

Sample code for driving 128x64 OLED display (SSD1306 driver) via ESP-IDF's I2C master driver

An Arduino wrapper to @sdima1357's usb_soft_host esp-idf example

Java Device I/O library that is portable across Single Board Computers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.

A tool for passive data capture and reconnaissance of serial flash chips. It is used in conjunction with a Saleae logic analyzer to reconstruct flash memory contents and extract contextual information about device operations.

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

Text library for TinyGo displays

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

Simple library for BLE advertise using ESP32 in Arduino

Menu creation Arduino library for LCDs, wraps LiquidCrystal.

Arduino wrapper for ESP-IDF HomeKit library

💧 Arduino library for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The library allows using the sensor over I2C or SPI on any board that supports Arduino.

Microcontroller projects (RPi, Arduino, ATTiny85, ESP, Pico, STM8/32)

🏗️ An I2C bootloader for Arduino.

A library for writing modern websockets applications with Arduino (ESP8266 and ESP32)

An Arduino library to ease the use of the ESP32 in IoT projects

Go·Hardware·Lean

Library to use i2c analog IC with arduino and esp8266. Can read analog value and write analog value with only 2 wire (perfect for ESP-01).

ESP32 OTA based on ThingsBoard Open-source IoT Platform

Homekit for ESP32 with Arduino framework