Contiki-based software package for the DecaWave EVB1000/DWM1001 platforms
Overview
Contiki is an open source operating system that runs on constrained embedded systems and provides standardized low-power wireless communication.
This repository contains a Contiki OS port for the DecaWave (now Qorvo) EVB1000 and DWM1001 platforms and includes our implementations of Glossy, Crystal and Weaver communication protocols, as well as UWB ranging primitives.
Package Features
This package includes support for:
- Contiki system clock and rtimers
- Watchdog timer
- Serial-over-USB logging using printf (ans/or RTT for DWM1001)
- LCD display
- LEDs
- Rime stack over UWB
- IPv6 stack over UWB [to be tested]
- Single-sided Two-way Ranging (SS-TWR) with frequency offset compensation
- Double-sided Two-way Ranging (DS-TWR)
- Bluetooth support (only DWM1001, and without integration with Contiki stacks)
- Glossy, a fast flooding and synchronisation primitive (only EVB1000)
- Crystal, a fast and reliable data collection protocol based on Glossy (only EVB1000)
- Weaver, a next generation data collection protocol based on concurrent transmissions (only EVB1000) video
Code Structure
├── cpu
│ ├── nrf52832
│ └── stm32f105
├── dev
│ └── dw1000
│ ├── crystal
│ ├── glossy
│ └── tsm
├── examples
│ ├── crystal-test
│ ├── deployment
│ ├── glossy-test
│ ├── ranging
│ ├── range-collect
│ ├── sensniff
│ ├── tsm-test
│ └── weaver
└── platform
├── evb1000
└── dwm1001
Requirements
- For both platforms
- For EVB1000
- For DWM1001
To use this port, clone the Contiki-UWB GitHub repository.
$ git clone https://github.com/d3s-trento/contiki-uwb.git
Inside the contiki-uwb directory, initialise the Contiki submodule:
$ git submodule update --init contiki
Then, either set UWB_CONTIKI environment variable pointing at the
contiki-uwb directory or define it in your application Makefile (you can use
examples/ranging/Makefile as a template).
For DWM1001, set also the following environment variables:
export NRF52_SDK_ROOT=/path/to/nrf_sdk
export NRF52_JLINK_PATH=/path/to/jlink/bin
Examples
We include three main examples showing:
- how to perform ranging: examples/ranging
- how to use the Rime stack for data collection together with ranging: examples/range-collect
- and a sniffer port for sensniff that can be used to debug your applications.
Note that other general Contiki examples directly available in the original
Contiki OS GitHub repository, e.g, the Rime stack examples, can also be used on
the DecaWave EVB1000 platform. To use them, start by copying them to contiki-uwb/examples
and adjust the Makefile appropriately.
Build and program your first example
EVB1000
Go to the examples/ranging folder and compile your example as:
$ cd examples/ranging/
$ make TARGET=evb1000
To flash your device with the compiled application, first connect the ST-LINK V2 programmer to your DecaWave EVB1000 and power up both the ST-LINK programmer and the EVB1000 through USB. Then, simply run:
$ make TARGET=evb1000 rng.upload
If everything works out fine, you should get a positive message like:
Flash written and verified! jolly good!
DWM1001
Go to the examples/ranging folder and compile your example as:
$ cd examples/ranging/
$ make TARGET=dwm1001
To flash your device with the compiled application, connect the device to the computer through USB. Then, simply run:
$ make TARGET=dwm1001 rng.upload
If everything works out fine, you should get a positive message like:
Verifying flash [100%] Done.
If you want to enable Bluetooth stack (SoftDevice), add the following to your project Makefile:
NRF52_SOFTDEVICE = 132
This will compile the application in a certain way so that the SoftDevice s132 needs to be flashed to the device. To flash SoftDevice, use the following:
make softdevice.flash
It is required to make clean between compiling the app with SoftDevice support and without it.
It is also required to completely erase flash when switching between applications that require SoftDevice
and the ones that do not.
Configuring the ranging application
Note that the ranging application requires to set the IEEE 802.15.4 link layer address of the responder (i.e., the node to range with in the rng.c file). After flashing a device with any application from this code, the device should show its IEEE address in the LCD display. Set this address appropriately in the line:
linkaddr_t dst = {{0xdd, 0x37}};
This particular address should be displayed in the LCD (EVB1000 only) as dd37, it is also printed to the standard
output when the node boots.
IEEE Addresses
In this port, we generate the IEEE 802.15.4 link layer addresses used for the network stacks and ranging using the DW1000 part id and lot id numbers. To see how we generate the addresses look at the set_rf_params() function in platform/evb1000/contiki-main.c.
Alternatively, only for dwm1001, 802.15.4 link layer addresses might be generated from the unique
Bluetooth address of the device. To request this, set #define DWM1001_USE_BT_ADDR_FOR_UWB 1 in
project-conf.h of your application.
Serial Port
After you flash the node, you should be able to connect to the serial port and see the serial input printed by the device by:
$ make PORT=/dev/tty.usbmodem1411 login
The PORT variable will change depending on your operating system.
If you are using the ranging appication, you should receive some data as follows:
R req
R success: 1.064711 bias 1.344711
Compilation Options
If your application does not need to perform ranging, you can disable ranging in your project-conf.h file as:
#define DW1000_CONF_RANGING_ENABLED 0
By default, ranging is enabled.
If you want to use Glossy and/or Crystal, define the following in your application Makefile:
UWB_WITH_GLOSSY = 1
This will include Glossy and Crystal into the compilation process and exclude all other Contiki stacks.
If you want to use TSM, define the following in your application Makefile:
UWB_WITH_TSM = 1
This will include TSM into the compilation process and exclude all other Contiki stacks.
Porting to other Platforms / MCUs
This port can be easily adapted for other platforms and MCUs based on the DW1000 transceiver. The radio driver only requires platform-specific implementations for the following functions:
- writetospi(cnt, header, length, buffer)
- readfromspi(cnt, header, length, buffer)
- decamutexon()
- decamutexoff(stat)
- deca_sleep(t)
For an overview of these functions, we refer the reader to the platform-specific section on dev/dw1000/decadriver/deca_device_api.h and the implementation on platform/evb1000/dev/dw1000-arch.[ch]. These functions must be implemented in the platform dw1000-arch code.
Publications
This port has been published as a poster at EWSN'18.
- Poster: Enabling Contiki on Ultra-Wideband Radios. Pablo Corbalán, Timofei Istomin, and Gian Pietro Picco. In Proceedings of the 15th International Conference on Embedded Wireless Systems and Networks (EWSN), Madrid (Spain), February 2018.
Please, consider citing this poster when using this Contiki port in your work.
@inproceedings{contiki-uwb,
title = {{Poster: Enabling Contiki on Ultra-wideband Radios}},
author = {Corbal\'{a}n, Pablo and Istomin, Timofei and Picco, Gian Pietro},
booktitle = {Proceedings of the International Conference on Embedded Wireless Systems and Networks},
series = {EWSN'18},
year = {2018},
}
A research paper about our Glossy and Crystal implementations for DW1000 has been accepted for publishing at EWSN'2020.
- Concurrent Transmissions for Multi-hop Communication on Ultra-wideband Radios. Diego Lobba, Matteo Trobinger, Davide Vecchia, Timofei Istomin, Gian Pietro Picco (University of Trento).
License
This software package makes use of low-level drivers provided by DecaWave and STMicroelectronics. These drivers are licensed on a separate terms. The files developed by our research group for this port are under BSD license.
Disclaimer
Although we tested the code extensively, it is considered a research prototype that likely contains bugs. We take no responsibility for and give no warranties in respect of using this code.