PSSwagger

A PowerShell module with commands to generate the PowerShell commands for a given RESTful Web Services using Swagger/OpenAPI documents.

PSSwagger is no longer being developed, but do not fret! AutoRest is now able to generate cmdlets directly, without needing PSSwagger. Please refer to: https://devblogs.microsoft.com/powershell/cmdlets-via-autorest/

This repository remains available for reference but pull requests and new issues will not be monitored.

PSSwagger Documentation

PSSwagger commands

• New-PSSwaggerModule
• New-PSSwaggerMetadataFile

Customizing PowerShell Metadata

• PowerShell Extensions

Testing generated module

• Mocking New-ServiceClient utility

Supported Platforms

Future note: We plan on supporting PowerShell 4+ for module consumers in the future; that scenario is untested currently. Testing note: While any full PowerShell version is fine for development, we recommend using PowerShell 5.1+ to enable testing our implementation of Get-FileHash.

Dependencies

Usage

NOTE: In the short term, for best performance, the operation IDs in your Open API specifications should be of the form "_". For example, the operation ID "Resource_GetByName" gets a resource named Resource by name.

1. Get PSSwagger!

   • Install from PowerShellGallery.com

     Install-Module -Name PSSwagger
     

   • Clone the repository

     git clone https://github.com/PowerShell/PSSwagger.git
     

2. Ensure AutoRest is installed and available in $env:PATH

   • Follow the instructions provided at AutoRest github repository.
   • Ensure AutoRest.cmd path is in $env:Path

     $env:path += ";$env:APPDATA\npm"
     Get-Command -Name AutoRest
     

3. Ensure CSC.exe is installed and available in $env:PATH

   • If CSC.exe is not installed already, install Microsoft.Net.Compilers package

     Install-Package -Name Microsoft.Net.Compilers -Source https://www.nuget.org/api/v2 -Scope CurrentUser
     

   • Add CSC.exe path to $env:Path

     $package = Get-Package -Name Microsoft.Net.Compilers
     $env:path += ";$(Split-Path $package.Source -Parent)\tools"
     Get-Command -Name CSC.exe
     

4. If you plan on pre-compiling the generated assembly, ensure you have the module AzureRM.Profile or AzureRM.NetCore.Preview available to PackageManagement if you are on PowerShell or PowerShell Core, respectively.

5. Run the following in a PowerShell console from the directory where you cloned PSSwagger in

   # Import PSSwagger module
   Import-Module PSSwagger
   
   # If you are trying from a clone of this repository, follow below steps to import the PSSwagger module.
   # Ensure PSSwaggerUtility module is available in $env:PSModulePath
   # Please note the trialing back slash ('\') to ensure PSSwaggerUtility module is available.
   $PSSwaggerFolderPath = Resolve-Path '.\PSSwagger\'
   $env:PSModulePath = "$PSSwaggerFolderPath;$env:PSModulePath"
   Import-Module .\PSSwagger
   
   # Ensure PSSwagger module is loaded into the current session
   Get-Module PSSwagger
   
   # Prepare input parameters for cmdlet generation
   $null = New-Item -ItemType Directory -Path C:\GeneratedModules -Force
   $params = @{
     # Download the Open API v2 Specification from this location
     SpecificationUri = 'https://raw.githubusercontent.com/Azure/azure-rest-api-specs/master/arm-batch/2015-12-01/swagger/BatchManagement.json'
     # Output the generated module to this path
     Path           = 'C:\GeneratedModules\'
     # Name of the generated module
     Name           = 'AzBatchManagement'
     # This specification is for a Microsoft Azure service, so use Azure-specific functionality
     UseAzureCsharpGenerator = $true
   }
   
   # You may be prompted to download missing dependencies
   New-PSSwaggerModule @params
   

   The generated module will be in the C:\Temp\GeneratedModule\Generated.AzureRM.BatchManagement folder. For more New-PSSwaggerModule options, check out the documentation.

6. Your generated module is now ready! For production modules (i.e. modules you will publish to PowerShellGallery.com), we recommend using the -IncludeCoreFxAssembly option to generate the Core CLR assembly, strong name signing assemblies in the generated module, and authenticode signing the module. Optionally, you can remove the generated C# code (under the Generated.CSharp folder) for even more security.

Metadata Generation

There are many cases where module generation doesn't result in the most optimal names for things like parameters or commands. To enable this and many other customization options, we've introduced additional PowerShell-specific Open API extensions that can be specified separately from your main specification. For more information, check out PowerShell Extensions and New-PSSwaggerMetadataFile.

Dynamic generation of C# assembly

When importing the module for the first time, the packaged C# files will be automatically compiled if the expected assembly doesn't exist.

Microsoft.Rest.ServiceClientTracing support

To enable Microsoft.Rest.ServiceClientTracing support, pass -Debug into any generated command.

The included PowerShell tracer uses Write-Debug to write tracing messages.

When the module is imported to older version of PowerShell, the following steps will need to be taken:

1. Implement either Microsoft.PowerShell.Commands.PSSwagger.PSSwaggerClientTracing or Microsoft.Rest.IServiceClientTracingInterceptor
2. Call: [Microsoft.Rest.ServiceClientTracing]::AddTracingInterceptor($myTracer)
3. If you use the Verbose or Debug streams of PowerShell, set $VerbosePreference or $DebugPreference, respectively

Note 1: We're not sure why yet, but something is setting [Microsoft.Rest.ServiceClientTracing]::IsEnabled to true before all cmdlet calls

Symbol Path

If the module's full CLR assembly is precompiled, the symbols folder will contain:

1. Generated.cs - The C# code used to generate the assembly
2. *.pdb - The corresponding PDB file that defines Generated.cs as the source file

Paging

When the "x-ms-pageable" extension is specified in the Swagger spec, paging is enabled in the generated module. This is true for both fragment URLs (when operationName is specified) and full URLs (when operationName is not specified).

A cmdlet that supports paging will have two additional optional parameters: -Paging: A switch parameter that specifies the cmdlet should only return the first page. To access the items, use $returnValue.Page -Page: Takes as input the last page return value and outputs the next page return value (again, to access the items, use $returnValue.Page). If the return value is null, no additional pages exist.

If -Paging is not specified and the cmdlet supports paging, the cmdlet will automatically unroll all pages. Assigning the result to a variable will result in all items being retrieved. Piping the cmdlet will result in pages being retrieved on-demand.

Silent execution when missing dependency packages

When dependency packages are expected to be missing, silent execution (bypassing the missing packages prompt) can be achieved by calling:

Import-Module PSSwaggerUtility
PSSwaggerUtility\Initialize-PSSwaggerDependencies -AcceptBootstrap -Azure

For Microsoft Azure modules, or:

Import-Module PSSwaggerUtility
PSSwaggerUtility\Initialize-PSSwaggerDependencies -AcceptBootstrap

For all other modules.

Notes

1. Swagger Specification is at: http://swagger.io/specification/
2. Azure ARM based Swagger documents at: https://github.com/Azure/azure-rest-api-specs
3. AutoRest Generators: https://github.com/Azure/autorest/tree/master/src/generator

Developers

Testing

You can run tests right after cloning the repository. The test scripts should install the required packages. To run the tests, navigate to the Tests directory, then run:

.\run-tests.ps1 -TestFramework <framework> -Verbose -TestSuite <TestSuite> -TestName <TestName>

TestFramework should be one of "net452" | "netstandard1.7". If you are on Windows, you can use either net452, which uses the full CLR, or netstandard1.7, which uses the Core CLR. For Linux, Darwin, or Nano Server users, you will have to use netstandard1.7.

TestFramework defaults to net452

Use TestSuite or TestName parameters to filter by Pester Tag or test name.

What does the script do?

The script will ensure dependencies exist on your machine, like AutoRest, node.js, npm, json-server, and dotnet CLI. Then it will run pester tests in a separate PS session and validate no tests failed.

If dotnet CLI is already in your PS session's path, and you don't need to upgrade, you can use the parameter -SkipBootstrap to skip dotnet CLI bootstrapping and save lots of time.

Unit tests

Scenario tests

The scenario test suite contains tests that hit actual (local) web API endpoints. The following scenarios are covered:

PSSwagger.LiveTestFramework

The PSSwagger implementation of the Azure Live Test Framework protocol is currently located in this repository in a subdirectory. Once PSSwaggerUtility is published to PowerShellGallery.com, the PSSwagger.LiveTestFramework code will be moved to a separate repository. You can find the readme for the PSSwagger.LiveTestFramework module here.

Code of Conduct

This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact [email protected] with any additional questions or comments.