188 Open source projects that are alternatives of or similar to Elixir_ale

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

Interact with I2C, SPI & GPIO devices using PowerShell Core!

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

Java Device I/O library that is portable across Single Board Computers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.

Raspberry Pi Go Language Interface

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

JavaScript Robotics and IoT programming framework, developed at Bocoup.

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

Go·Hardware·Lean

Text library for TinyGo displays

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

Userinterface for Volumio (RaspberryPi) with ssd1322 and ssd1306 oled display, spectrum bargraph, progress bar, LED functions, Standby-functions, 4 Buttons and Rotary Encoder.

A tool for passive data capture and reconnaissance of serial flash chips. It is used in conjunction with a Saleae logic analyzer to reconstruct flash memory contents and extract contextual information about device operations.

💧 Arduino library for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The library allows using the sensor over I2C or SPI on any board that supports Arduino.

Golang library to interact with Bosch Sensortec BMP180/BMP280/BME280/BMP388 temperature, pressure and humidity sensors via I2C-bus from Raspberry PI.

STM32F103 logic analyzer and more

Python module to drive a SSD1306 / SSD1309 / SSD1322 / SSD1325 / SSD1327 / SSD1331 / SSD1351 / SH1106 OLED

.Net Core Library to show images on Waveshare E-Paper Displays

U8g2 for rt-thread - a monochrome graphics library

Go drivers for pheripheral I/O on Linux.

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

IOsonata multi-platform multi-architecture power & performance optimized software library for fast and easy IoT MCU firmware development. Object Oriented design, no board package to define, just pure plug & play any boards

ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.

The driver for the microprocessor

ssd1306 Command Line Tool for Raspberry Pi

Documents and Software Related to the famous CH341a used in I2C/SPI Flash Programmers also called as Bios Programmers

Golang library to interact with liquid-crystal display driven by Hitachi HD44780 IC via I2C-bus driver from Raspberry PI.

U8g2 for arm linux - a monochrome graphics library

A nodejs client for pigpio socket interface.

Microcontroller projects (RPi, Arduino, ATTiny85, ESP, Pico, STM8/32)

Advantech iManager Linux driver set for Advantech Embedded Boards

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, or SPI

JavaScript framework for robotics, drones, and the Internet of Things (IoT)

Driver for the SSD1306 and SH1106 based 128x64, 128x32, 64x48 pixel OLED display running on ESP8266/ESP32

GFX Demo for Arduino and the ESP-IDF

vdcd - virtual device controller daemon/framework for digitalSTROM

Golang framework for robotics, drones, and the Internet of Things (IoT)

🍓This project is about smart ehouse which base on python, Raspberry Pi, deep learning and so on.

Platform-agnostic Rust driver for the PCA9685 I2C 16-channel, 12-bit PWM/Servo/LED controller

Thin Web binding API to access series data.

⚡️ A Swift library for using Hall effect based water flow sensors.

OctoPrint Enclosure Plugin

Raspberry Pi HTTP Interface for GPIO Control

Fast, Lightweight STM32 I2C HAL Driver for the MPU6000/MPU6050 IMU

Debugging tool for I2C networks, built for STM32 microcontrollers

Garage Door Monitor (OverHeadDoor) - Python3, Raspbian

Connect RaspberryPi GPIOs and 1-Wire temperature sensors to MQTT 🍰🔘📡

HomeGenie, the open source, programmable, home automation server for smart connected devices and applications

Distributed Scheduled Job Framework

HydraNFC is an open source NFC (13.56MHz) Shield hardware for researcher, hackers, students, embedded software developers or anyone interested in debugging/hacking/developing/penetration testing NFC hardware.

USB SPI programmer/debugger for CSR BlueCore bluetooth chips, based on FTDI USB to UART converter, for Linux and Windows

I2C slave library for the Raspberry Pi Pico

Control remote controlled outlets via Raspberry PI

Library to use i2c digital expander with arduino, esp8266 and esp32. Can read write digital value with only 2 wire (perfect for ESP-01).

I2C serial bus access with Node.js