96 Open source projects that are alternatives of or similar to epoll

Golang framework for robotics, drones, and the Internet of Things (IoT)

JavaScript Robotics and IoT programming framework, developed at Bocoup.

JavaScript framework for robotics, drones, and the Internet of Things (IoT)

문c 블로그 with ARM64 Linux Kernel 5.x

Go·Hardware·Lean

G-code interpreter and stepmotor controller for crazy fast coordinated moves of up to 8 steppers. Uses the Programmable Realtime Unit (PRU) of the Beaglebone.

A node.js USB bootloader server for BeagleBone for booting it into mass storage mode

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

This library enables you to use Interrupt from Hardware Timers on an ESP8266-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tas…

A set of scripts that can be used to provide a "safe power off switch" for a Raspberry Pi.

Golang library to interact with DHT11/DHT22/DHT12 temperature and humidity sensors from Raspberry PI.

Ruby conversion of RPi.GPIO Python module

Golang library to interact with liquid-crystal display driven by Hitachi HD44780 IC via I2C-bus driver from Raspberry PI.

A native Go library for Linux GPIO

Example codes using sdcc to target STM8S MCUs.

Interact with I2C, SPI & GPIO devices using PowerShell Core!

BASIC environment with a REPL, a web interface, and RPi support written in Rust

A Raspberry Pi robot that helps people make their grocery list.

CuteHMI is an open-source HMI (Human Machine Interface) software written in C++ and QML, using Qt libraries as a framework. GitHub repository is a mirror!

Raspberry Pi Go Language Interface

Make your own BadUSB device!

Userspace Utilities for managing GPIOs in Linux

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

GPIO access and interrupt detection with Node.js

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

Displays CI statuses on a dashboard and triggers fun modules representing the status!

Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

Java Device I/O library that is portable across Single Board Computers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.

Acapela is... a-cape-for-Bela, and a box.

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

Aplikasi mobile remote control untuk mengendalikan saklar/relay yang terhubung dengan port LED/GPIO di router berbasis OpenWRT

This library enables you to use Interrupt from Hardware Timers on an Arduino, such as Nano, UNO, Mega, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behavin…

A bare minimum but really fast and simple stepper library for Arduino.

i2c-devices is a library for using I2C devices by using /dev/i2c-* or /sys/class/gpio with bit-banging.

ROS nodes for upboard usage

Go library to do GPIO on systems with /sys/class/gpio (sysfs)

This library enables you to use Interrupt from Hardware Timers on an STM32F/L/H/G/WB/MP1-based board. These STM32F/L/H/G/WB/MP1 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micr…

Cloud4RPi Client Library

A simple interface to GPIO devices with Raspberry Pi

General Purpose Input/Output (GPIO) library for Arduino

Fast GPIO, PWM, servo control, state change notification and interrupt handling with Node.js on the Raspberry Pi

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

Collection of Max/MSP and Pd externals developed from the explanations in the book "Designing Audio Objects for Max/MSP and Pd" by Eric Lyon.

HX711 full function driver for general MCU and Linux.

Programming framework for the Beaglebone black's Programmable Realtime Unit (PRU)

A Python package and CLI tool to work with w1 temperature sensors like DS1822, DS18S20 & DS18B20 on the Raspberry Pi, Beagle Bone and other devices.

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

Aircraft engine management system using Qt.

Golang library to interact with Bosch Sensortec BMP180/BMP280/BME280/BMP388 temperature, pressure and humidity sensors via I2C-bus from Raspberry PI.

Advantech iManager Linux driver set for Advantech Embedded Boards

Micro Expression Control

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

Full-featured Raspberry Pi based irrigation controller and web application for scheduling.

Golang HX711 interface using periph.io driver

This library enables you to use Interrupt from Hardware Timers on an SAMD-based board. These SAMD Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you …

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

Interact with hardware in Elixir - GPIOs, I2C and SPI

Demonstration driving The Pi Hut Raspberry Pi 3D Xmas tree using Python Asyncio

Expose GPIO modules (Raspberry Pi, Beaglebone, PCF8754, PiFace2 etc.) and digital sensors (LM75 etc.) to an MQTT server for remote control and monitoring.