142 Open source projects that are alternatives of or similar to InternalTemperature

OneWire slave device emulator

No description or website provided.

A DIY drum machine for the teensy microcontroller (hardware / software)

Payload for teensy like a rubber ducky but the syntax is different. this Human interfaes device ( HID attacks ). Penetration With Teensy . Brutal is a toolkit to quickly create various payload,powershell attack , virus attack and launch listener for a Human Interface Device ( Payload Teensy )

TPM Genie is an I2C bus interposer for discrete Trusted Platform Modules

Collect RaspberryPi CPU and GPU temperature with telegraf

teensy示例代码

STM32 peripheral mappings for Drone, an Embedded Operating System.

VSCode debug extension for probe-rs. It uses the MS DAP protocol to communicate directly with the probe (via probe-rs), and supports basic command line debugging in addition to VSCode UI.

Implementation of the CNN from End to End Learning for Self-Driving Cars on a Nvidia Jetson TX1 using Tensorflow and ROS

FlexCAN (CAN 2.0 / CANFD) Library for Teensy 3.x and 4.0

KiCAD library for Teensy microcontrollers

ARMv7M ELF loader

C64 Emulation on a Teensy 3.6

A Visual Effects pipeline to manage jobs, shots and software assignment, with a simple asset manager. Its extensively integrated with CortexVFX and Gaffer. (and it builds booth, with support for Maya, Houdini and Nuke, if you have then installed!)

Handheld tactile switch keyboard for Teensy 3.2 compatible boards.

This is the code to accompany the lightsaber project at http://www.iliketomakestuff.com/make-lightsaber/ Expected hardware is listed in post (Teensy 3.2, Prop Shield, DotStar LEDs)

🚧 Extension to build code for the teensy boards from catkin

Kernel module to get/set (both) fan speed(s) on ASUS Zenbooks

GUIslice drag & drop embedded GUI in C for touchscreen TFT on Arduino, Raspberry Pi, ARM, ESP8266 / ESP32 / M5stack using Adafruit-GFX / TFT_eSPI / UTFT / SDL

teensy midi loop recorder

Simple way to control your IOT development boards like ESP8226, ESP32, Arduino SAMD21, Adafruit SAMD21, SAMD51, nRF52, STM32, Teensy, SAM DUE with Amazon Alexa or Google Home

A full-featured DMX library for Teensy 3, Teensy LC, and Teensy 4. "Programmable DMX and arbitrary USB serial device emulation."

Circular Buffer/ Circular Array

Dexed port for Teensy (3.5/3.6 with audio shield)

This is simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, SAMD21/SAMD51, nRF52, STM32, RP2040-based, etc. boards running Ethernet shields. The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Coexisting now with `ESP32 WebServer` and…

Teensy 4/3.x/LC ADC implementation

Allows a microcontroller, with native USB capabilities, to appear as a MIDI device over USB to a connected computer

The jankest autonomous drone ever built and programmed from scratch

Indoor environment monitor based on Esp8266

Text-to-Speech for Arduino

Manually submit weather station information to the APRS-IS network.

Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

DMXUSB emulates an ENTTEC-compatible DMXKing USB to DMX serial device with one, two, or n universes.

Enables WiFiNINA network connection (local and Internet) for SAM DUE, SAMD21, SAMD51, Teensy, AVR Mega, STM32, RP2040-based boards, etc. in addition to Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000, Arduino UNO WiFi Rev.2 , Nano 33 IoT, Nano_RP2040_Connect. Now with fix of severe limitation to permit sending much larger data than total 4K

Driving one of those cheap RF1101SE boards with a Arduino or Teensy

💧 Arduino library for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The library allows using the sensor over I2C or SPI on any board that supports Arduino.

Ferret is a free software lisp implementation for real time embedded control systems.

DiffBot is an autonomous 2wd differential drive robot using ROS Noetic on a Raspberry Pi 4 B. With its SLAMTEC Lidar and the ROS Control hardware interface it's capable of navigating in an environment using the ROS Navigation stack and making use of SLAM algorithms to create maps of unknown environments.

Library for STM32F1x, F4x, F7x and Teensy 3.5/6 based on library Gameduino 3. Playback videos support, for FTDI screens FT81x.

Python idiomatic SDK for Cortex™ Data Lake.

Cooperative multitasking for Arduino, ESPx and STM32 microcontrollers

Barometric pressure, temperature, humidity and light sensing weather shield for Arduino.

Arduino library for creating MIDI controllers and other MIDI devices.

MPU9250 (MPU6500 + AK8963) I2C Driver in Python for Raspbery PI

This is a library for creating a MIDI controller using an Arduino or Teensy board.

Marlyn based thermistor library for read temperature.

A tight BPM clock generator for Arduino and Teensy

This project is a SIEM with SIRP and Threat Intel, all in one.

Convert a Sony Vaio into a Portable Raspberry Pi and Teensy laptop

Simple TLS/SSL Ethernet WebServer, HTTP Client and WebSocket Client library for for AVR, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, ENC28J60 or Teensy 4.1 NativeEthernet/QNEthernet. It now supports Ethernet TLS/SSL Client. The library supports …

mcp9600 full function driver

SIDKick -- the first complete SID 6581/8580-drop-in-replacement that you can build yourself

Fast Stepper Motor Library for Teensy boards

The EncoderTool is a library to manage and read out rotary encoders connected either directly or via multiplexers to ARM based boards. Encoder push buttons are supported. Callback functions can be attached to encoder changes and button presses to allow for event driven applications

Helm chart for Cortex

Prometheus remote write proxy that adds Cortex tenant ID based on metric labels

Tado cloud connector to control Tado devices

Send and receive MIDI messages over Ethernet (rtpMIDI or AppleMIDI)