422 Open source projects that are alternatives of or similar to Raspberry-ssd1306

Userinterface for Volumio (RaspberryPi) with ssd1322 and ssd1306 oled display, spectrum bargraph, progress bar, LED functions, Standby-functions, 4 Buttons and Rotary Encoder.

Driver for the SSD1306 and SH1106 based 128x64, 128x32, 64x48 pixel OLED display running on ESP8266/ESP32

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

Go·Hardware·Lean

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

U8g2 for arm linux - a monochrome graphics library

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

Text library for TinyGo displays

Python module to drive a SSD1306 / SSD1309 / SSD1322 / SSD1325 / SSD1327 / SSD1331 / SSD1351 / SH1106 OLED

Sample code for driving 128x64 OLED display (SSD1306 driver) via ESP-IDF's I2C master driver

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

Raspberry Pi Go Language Interface

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.

Ninjaberry: Raspberry Pi UI for @bettercap

Interact with hardware in Elixir - GPIOs, I2C and SPI

STM32F103 logic analyzer and more

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

U8g2 for rt-thread - a monochrome graphics library

JavaScript Robotics and IoT programming framework, developed at Bocoup.

Java Device I/O library that is portable across Single Board Computers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.

Documents and Software Related to the famous CH341a used in I2C/SPI Flash Programmers also called as Bios Programmers

Font creator for the esp8266-oled-ssd1306 library

A tool for passive data capture and reconnaissance of serial flash chips. It is used in conjunction with a Saleae logic analyzer to reconstruct flash memory contents and extract contextual information about device operations.

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

MPU9250 (MPU6500 + AK8963) I2C Driver in Python for Raspbery PI

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

Embedded SHT Drivers for Sensirion Temperature and Humidity Sensors - Download the Zip Package from the Release Page

Scanner WiFi avec écran OLED I2C (SSD1306) sur un ESP-01 (ESP8266)

Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, or SPI

Go drivers for pheripheral I/O on Linux.

TinyGo drivers for sensors and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.

Microcontroller projects (RPi, Arduino, ATTiny85, ESP, Pico, STM8/32)

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

The driver for the microprocessor

A nodejs client for pigpio socket interface.

Renders QML applications to an SSD1309 OLED screen

Interact with I2C, SPI & GPIO devices using PowerShell Core!

💧 Arduino library for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The library allows using the sensor over I2C or SPI on any board that supports Arduino.

GFX Demo for Arduino and the ESP-IDF

IOsonata multi-platform multi-architecture power & performance optimized software library for fast and easy IoT MCU firmware development. Object Oriented design, no board package to define, just pure plug & play any boards

An extremely crude, lightweight Web Frontend for Suricata/Bro to be used with BriarIDS

Display clock for NYC subways

Arduino Library to access the MCP7940M, MCP7940N and MCP7940x Real-Time chips

Thin Web binding API to access series data.

OpenWrt Stable 1907 with lean's package

A tinyML system using a Raspberry Pi Pico and TensorFlow Lite for Microcontrollers to detect loud talking. It can be utilized to encourage people to eat quietly to prevent the spread of the coronavirus and help in the fight against COVID

Platform agnostic Rust driver for the CCS811 ultra-low power digital gas sensor for monitoring indoor air quality

Raspberry pi project that controls jack-o-lantern via servo motor and PIR motion sensors

An End-to-End Encrypted Gateway to access Gladys from the internet

Flash firmware to PineTime the friendly wired way with OpenOCD

A radio repeater controller (supporting both simplex and duplex operation modes) for the RaspberryPi.

An Arduino library for the MicroView - a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics

OS for Pi-KVM based on Arch Linux ARM

Docker images for Rust dedicated to cross compilation for ARM v6 and more

⚡ A Swift library for the I2C SHT20 Humidity and Temperature Sensor.

VigilantPI is a lightweight NVR which targets mainly Raspberry Pi

A Rust library for the Pimoroni Blinkt!, and any similar APA102 or SK9822 LED strips or boards, on a Raspberry Pi.

Single-Cell Li-Ion Battery Charger with Monitoring