858 Open source projects that are alternatives of or similar to Sparrow Wifi

IEEE 802.11 a/g/p Transceiver

SoapySDR HackRF module

SDR Rx/Tx software for Airspy, Airspy HF+, BladeRF, HackRF, LimeSDR, PlutoSDR, RTL-SDR, SDRplay RSP1 and FunCube

High-precision indoor positioning framework, version 3.

A library to access system setting, and change it easily. eg: volume, brightness, wifi

📶 1090ES ADS-B Out Add-on

📱📲 A wrapper for the MultipeerConnectivity framework for automatic offline data transmission between devices

A tool made for specially scanning nearby devices[BLE, Bluetooth & Wifi] and execute our given command on our system when the target device comes in-between range.

A simple Python script to configure wifi over bluetooth for a Raspberry Pi 3

GPS altimeter/variometer with LCD display, routes with waypoints, data/gps track logging, bluetooth NMEA sentence transmission, wifi AP + webpage configuration

Software defined radio receiver powered by GNU Radio and Qt.

Open Satellite Project Information

open-source IEEE 802.11 WiFi baseband FPGA (chip) design

📲 Communicate with nearby devices using Bluetooth, BLE, WiFi and near-ultrasonic audio. Broadcast and receive small payloads (like strings) using the easy-to-use React Native API!

Obtain power spectrum from SoapySDR devices (RTL-SDR, Airspy, SDRplay, HackRF, bladeRF, USRP, LimeSDR, etc.)

Easy to use Utility library for Android

A simple framework that brings Apple devices together - like a family

E2E test framework for tests with complex environment requirements.

Realtek SDIO Wi-Fi driver

Smart wireless MIDI foot controller for guitarists and more.

Breakouts for ESP8266 and ESP32 WiFi/WLAN + Bluetooth modules from Espressif (ESP-WROOM-02, ESP-WROOM-32)

Bluetooth Low Energy (BLE) packet sniffer and transmitter for both standard and non standard (raw bit) based on Software Defined Radio (SDR).

Erics Master Frequency lists for RF tuning

This RTL8720DN firmware export a RPC server interface through hardware SPI/UART port to MCU.

Ad-hoc peer-to-peer iOS library

RFSec tools

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, etc.

RFSec-ToolKit is a collection of Radio Frequency Communication Protocol Hacktools.无线通信协议相关的工具集，可借助SDR硬件+相关工具对无线通信进行研究。Collect with ♥ by HackSmith

ESP32 Thing-compatible board using the WROOM module and a QWIIC connector.

A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32

Universal Radio Hacker: Investigate Wireless Protocols Like A Boss

Software defined radio receiver powered by GNU Radio and Qt.

multi-sdr-gps-sim generates a IQ data stream on-the-fly to simulate a GPS L1 baseband signal using a SDR platform like HackRF or ADLAM-Pluto.

Spectrum analyzer for multiple SDR platforms (PyQtGraph based GUI for soapy_power, hackrf_sweep, rtl_power, rx_power and other backends)

Android OBD diagnostics with any ELM327 adapter

Connect Apple devices via bluetooth and wifi.

An android app that scans Bluetooth and WiFi for FIND3

GNU Radio OOT module for demodulating and decoding ADS-B packets

Low power consumption for TTGO t-beam

This project is about creation of affordable and easy-to-manufacture prototypes of PCBs which are used to expand the capabilities of existing low-cost SDR receivers based on RTL2832U chip.

low cost software radio platform

Espressif ESP32 Based Smarthome screen for MQTT

Feature-rich wifi hotspot creator for Linux which provides both GUI and command-line interface. It is also able to create a hotspot using the same wifi card which is connected to an AP already ( Similar to Windows 10).

Simple macOS CLI to connect/disconnect a Bluetooth device. Useful for AirPods or other Bluetooth headphones.

Library for Arduino to debug projects over WiFi, with web app or telnet, with print commands like Serial Monitor

Network and WiFi controller: provisioning, configuration management and updates, (pull via openwisp-config or push via SSH), x509 PKI management and more. Mainly OpenWRT, but designed to work also on other systems.

Windows Precision Touchpad Driver Implementation for Apple MacBook / Magic Trackpad

macOS system monitor in your menu bar

Android Bluetooth Low Energy (BLE) Fast Development Framework. It uses simple ways to filter, scan, connect, read ,write, notify, readRssi, setMTU, and multiConnection.

Bluetooth experimentation framework for Broadcom and Cypress chips.

Send arbitrary IEEE 802.11 frames with Espressif's ESP32

A Simple library for communicating with USB and Bluetooth HID devices on Linux, Mac and Windows.

Command Line Interface (CLI) for RobotOps

A hand-wired USB & Bluetooth keyboard powered by Python and more

A simple DSP library and command-line tool for Software Defined Radio.

[NOT MAINTAINED] This script creates a NATed or Bridged WiFi Access Point.

🍓📡🍍Monitor illegal wireless network activities. (Fake Access Points), (WiFi Threats: KARMA Attacks, WiFi Pineapple, Similar SSID, OPN Network Density etc.)

An implementation of TEMPEST en GNU Radio

CLI for bluetooth on OSX: power, discoverable state, list, inquire devices, connect, info, …

Golang bluetooth client based on bluez DBus interfaces