1293 Open source projects that are alternatives of or similar to swifitch-software

MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA.

Swifitch is ESP8266 based relay board that could be used to turn any light or any wall socket into smart one!

(OBSOLETE) ESP MQTT JSON Multisensor for Home Assistant. Supported sensors include the TEMT6000 light, AM312 PIR, DHT22 temperature/humidity sensors. RGB led supports flash, fade, and transition. Over-The-Air (OTA) uploading, too!

No description or website provided.

A framework for ESP8266 & ESP32 microcontrollers with a React UI

IoT Communications Module for Energy Access. An easy way to get production ready, bi-directional communications for your IoT embedded device. Proiect supported by the EnAccess Foundation - https://enaccess.org

ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.

基于ESP8266官方SDK快速接入阿里云物联网平台

(Outdated) Smart RGB Matrix Clock

simple sketch of using ESP8266WebServer to switch relays on GPIO pins. It serves a simple website with toggle buttons for each relay

🔑 WiFi captive portal for ESP8266 for phishing WiFi passwords

ESP8266 NodeMCU Workshop

An open source DIY implemetation of a face mask with voice visuals and animations.

blinker中文文档

Wifi and MQTT handling for ESP8266 and ESP32

An IoT Solution,Blinker library for embedded hardware. Works with Arduino, ESP8266, ESP32.

TCP/UDP Applicaton for UNO/MEGA/STM32 using ESP8266's AT firmware.

A library to make using WiFi & MQTT on the ESP8266 easy.

MASLOW: an Open WiFi Detector with ESP8266

Arduino library to control Mitsubishi Heat Pumps via connector cn105

(OBSOLETE) ESP8266 MQTT JSON Digital LEDs for Home Assistant

ESP8266 based wind anemometer project

SmartHome: firmware per ESP8266 - Casa domotica

💡 智能电器管理综合系统

MQTT client library for ESP8266

The ESP8266 based multi-client lighting gadget

Micropython Smarthome framework

Reads and writes data (e.g. power, mode, fan status etc.) from/to a Mitsubishi Heavy Industries (MHI) air conditioner (AC) via SPI controlled by MQTT

Open Home Automation with Home Assistant, ESP8266/ESP32 and MQTT

Blinker python library for hardware. Works with Raspberry Pi, Banan Pi, Linux devices

LCD touchscreen for Home Automation

Esp8266 mqtt interface for Wavin AHC-9000/Jablotron AC-116

Yet another alarm (control) panel for Home Assistant.

Android OBD diagnostics with any ELM327 adapter

💡 ESP8266 framework for Homie, a lightweight MQTT convention for the IoT

An easy to use ESP8266 flash tool with built-in support for the Deauther Project.

Hugo is a 4-button ESP8266 Wi-Fi Remote, Arduino compatible and simple to use.

Arduino IDE project: send data from DS18B20 temperature sensor to mqtt.flespi.io via MQTT over SSL.

IoT Utility for Visual Studio Code: Arduino, Espressif, Raspberry Pi, mbed and more

Librairie Universelle Teleinformation (TIC)

Alternative firmware for Itead Sonoff switches, based on the MQTT protocol and a TLS connection

A ESP8266 Library for easy IOT device development

Issue Tracker for ESPHome

📶 An Arduino for ESP8266 asynchronous MQTT client implementation

A small Arduino library for GSM modules, that just works

MQTT 433.92 MHz radio-frequency device gateway

ESP8266 based bidirectional bridge between MQTT and IR (change MQTT message to IR signal and change received IR signal to MQTT message)

This repository is for generating Blynk sketches.

Temper is a compact temperature sensor based on ESP8266 and SHT30 with large 13x7 pixel led display.

Minimalistic system to read AMS/HAN data from electrical meter

ESP32 好玩、有趣、实用的项目

esp8266 wifi-serial bridge, outbound TCP, and arduino/AVR/LPC/NXP programmer

基于 ESP8266 利用 IRext 开源红外库实现万能红外遥控，已对接 MQTT 协议，可轻松接入 HomeAssistant 💣

Replaces original Tuya firmware on Beca thermostat with ESP8266 wifi module

ESP8266 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps

MQTT RGB LEDs Using JSON for Home Assistant

Blynk is an Internet of Things Platform aimed to simplify building mobile and web applications for the Internet of Things. Easily connect 400+ hardware models like Arduino, ESP8266, ESP32, Raspberry Pi and similar MCUs and drag-n-drop IOT mobile apps for iOS and Android in 5 minutes

PJON (Padded Jittering Operative Network) is an experimental, arduino-compatible, multi-master, multi-media network protocol.

AiLight is a custom firmware for the esp8266 based Ai-Thinker (or equivalent) RGBW WiFi light bulbs

Library for https://sinric.pro - simple way to connect your device to Alexa, Google Home, SmartThings and cloud