87 Open source projects that are alternatives of or similar to CAN-Bus_Shield

MCP_CAN Library

An Arduino library to use with the Microchip ATECCX08a Cryptographic Co-processors.

Design files and firmware files for the RedBot robotics board.

Spectrum Shield for Arduino, available from SparkFun Electronics.

Sapog - advanced multiplatform ESC firmware

Logic level converter bi-directional with Mosfets

This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.

database of known Mazda CAN messages

Python implementation of UDS (ISO-14229) standard.

Regulated DSDL definitions for Cyphal (standard and third-party)

Framework to work with J1939 Frames used in CAN bus in bus, car and trucks industries

Library for parsing CAN bus database description formats

CAN bus tools.

Arduino System Bus

ESP32+RFM95 = Single-channel LoRa WiFI Gateway (or device!)

An open source serial LCD (HD44780) controller based on the ATmega328.

VAN - CAN protocol bridge (V2C) for cars made by PSA Group (Peugeot, Citroen)

MP3 Player Shield - Play MP3s from an SD card! Created by and available from SparkFun Electronics

Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.

Lipo Charger Basic product 10217

Development Board for Android

A compact implementation of the UAVCAN/CAN protocol in C for high-integrity real-time embedded systems

SocketCan example on dotnet-core

Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI

A breakout and development board for the ESP8266 WiFi SoC.

The Cyphal specification documents are maintained here.

🚛 A curated list of awesome CAN bus tools, hardware and resources

USB-CAN Analyzer Linux Support

The Big Easy Driver available from SparkFun Electronics

An open source board for load cell reading and configuration based on the HX711 and ATmega328.

Transform OBD2 data from your car into human readable data

Python implementation of the Cyphal protocol stack.

No description or website provided.

UniSwarm Tools for UDT interface and CANOpen in Qt5

MPPT single-cell LiPo battery charger based on the LT3562

VSCP (Very Simple Control Protocol) IoT/m2m framework

Tractor Hacking GHPages

bxCAN peripheral driver for STM32 chips

These wireless transmitters and receivers easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

The BNO080/BNO085 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.

ESP32 Thing-compatible board using the WROOM module and a QWIIC connector.

SoCFPGA: Mapping HPS Peripherals, like I²C or CAN, over the FPGA fabric to FPGA I/O and using embedded Linux to control them (Intel Cyclone V)

Barometric pressure, temperature, humidity and light sensing weather shield for Arduino.

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders.

Portable reference implementation of the UAVCAN protocol stack in C++ for embedded systems and Linux.

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).

Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. Can be used for monitoring low speed CAN (interior can bus of most cars, less than 500kbps). For higher speeds serial port can become a bottleneck in case data density is high.

Development platform for the Espressif ESP32 WiFi/Microcontroller SoC

a SocketCAN over Ethernet tunnel

Evaluation board for the ThingMagic UHF RFID Module for use with 860 to 920MHz RFID Tags

The bootloader used to flash our CAN-connected boards

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

Linux-CAN / SocketCAN user space applications

car hacking tools

Generate CAN dbc file with OEM defined CAN matrix (*.xls).

ESP32 board with CAN interface, runs on 12V power (with auto shutdown)

No description or website provided.

Open Source CAN bus Analyser and Simulation Software

Bidirectional CAN-Bus to MQTT-Bridge

A breakout board for the Si7021 Temperature and Humidity sensor.