175 Open source projects that are alternatives of or similar to hx711

hcsr04 full function driver

pcf8591 full function driver

mcp9600 full function driver

ina219 full function driver

ADXL345 full function driver for general MCU and Linux.

bmp388 full function driver

bmp180 full function driver

at24cxx full function driver

mcp4725 full function driver

MAX7219 full function driver for general MCU and Linux.

⚡️🛠🧰 A curated list for Embedded and Low-Level development in the Swift programming language.

ssd1351 full function driver

max30205 full function driver

sht31 full function driver

uvis25 full function driver

⚙️ nanoFramework Interpreter, CLR, HAL, PAL and reference target boards

JavaScript Robotics and IoT programming framework, developed at Bocoup.

mlx90614 full function driver

sgp30 full function driver

fm24clxx full function driver

Golang HX711 interface using periph.io driver

Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.

Ruby conversion of RPi.GPIO Python module

GPIO access and interrupt detection with Node.js

A .NET/Mono IO Library for Raspberry Pi This library is a complete refactoring of Raspberry-Sharp libraries, merged into one library and updated to RB3, CM3 and RB3+

Aplikasi mobile remote control untuk mengendalikan saklar/relay yang terhubung dengan port LED/GPIO di router berbasis OpenWRT

Java Device I/O library that is portable across Single Board Computers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.

i2c-devices is a library for using I2C devices by using /dev/i2c-* or /sys/class/gpio with bit-banging.

Userspace Utilities for managing GPIOs in Linux

Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

Golang library to interact with liquid-crystal display driven by Hitachi HD44780 IC via I2C-bus driver from Raspberry PI.

Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.

Displays CI statuses on a dashboard and triggers fun modules representing the status!

Demonstration driving The Pi Hut Raspberry Pi 3D Xmas tree using Python Asyncio

ROS nodes for upboard usage

Advantech iManager Linux driver set for Advantech Embedded Boards

Fast GPIO, PWM, servo control, state change notification and interrupt handling with Node.js on the Raspberry Pi

A curated collection of technical documentation for Arcades, Handhelds, Consoles, Computers and MCU’s.

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

A Python package and CLI tool to work with w1 temperature sensors like DS1822, DS18S20 & DS18B20 on the Raspberry Pi, Beagle Bone and other devices.

A native Go library for Linux GPIO

JavaScript framework for robotics, drones, and the Internet of Things (IoT)

RS485 ModBus tiny multi-sensor module

Interact with hardware in Elixir - GPIOs, I2C and SPI

Citrix ADC (Formerly Netscaler) templates and scripts for AWS deployment

A set of scripts that can be used to provide a "safe power off switch" for a Raspberry Pi.

A Rust Interface to the Linux sysfs GPIO interface (https://www.kernel.org/doc/Documentation/gpio/sysfs.txt)

HomeGenie, the open source, programmable, home automation server for smart connected devices and applications

Go·Hardware·Lean

OctoPrint Enclosure Plugin

Control GPIOs with a webinterface. Simple, powerful.

Go library to do GPIO on systems with /sys/class/gpio (sysfs)

Raspberry Pi HTTP Interface for GPIO Control

Control remote controlled outlets via Raspberry PI

Interact with I2C, SPI & GPIO devices using PowerShell Core!

A native Go library for Raspberry Pi GPIO

A nodejs client for pigpio socket interface.

L1 R1：WCH 24MHz MCS-51 USB MCU (CH552T/CH552P/CH552E/CH552G/CH551G)