134 open source projects by sparkfun

An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.

Example Code for Nokia 5110 Graphic LCD

An Arduino shield-compatible breakout board for the ATSAMD21G18. Battery-power enabled, with an onboard LiPo charger.

Controlling and reading from the MLX90640 IR array thermal imaging sensor

The RedBoard is SparkFun's take on the Arduino Uno. It combines the simplicity of the Uno's Optiboot bootloader (which is used in the Pro series), with the stability of the FTDI and a mini-B USB connector.

An Arduino library which allows you to communicate seamlessly with the full range of u-blox GNSS modules

SparkFun Low Current Sensor Breakout Board - ACS712

Open source watch kit

No description or website provided.

This repo houses all of the SFE Fritzing parts for use in diagrams in tutorials. If you create a new part in Fritzing that correlates to an SFE part, please add it here so others may use it and to avoid duplication.

Processing application to configure XBees

SparkFun Transceiver Breakout - nRF24L01+

The MicroView is a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics

No description or website provided.

No description or website provided.

A library for the laser based VL53L1X Time Of Flight distance sensor capable of detecting a target 4m away!

Arduino libraries for the BMP180 pressure sensor breakout board

Evaluation board for the ThingMagic UHF RFID Module for use with 860 to 920MHz RFID Tags

An Arduino library for the MicroView - a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics

Code, final versions, and information on the Sparkfun Graphical Datasheets

An open source board for load cell reading and configuration based on the HX711 and ATmega328.

Example code and board files for MPL3115A2 Breakout board.

Monster Moto Shield available from SparkFun Electronics.

Library for the TLC5940

Luminosity Sensor breakout available from SparkFun Electronics

An Arduino library for the trifecta of spectral sensors covering 18 discrete wavelengths from NIR to UV.

Python package for the qwiic system.

Arduino sketch for MPU-9250 9DoF with AHRS sensor fusion

ESP32+RFM95 = Single-channel LoRa WiFI Gateway (or device!)

A breakout board for ST Micro's LSM9DS0 -- a 3D accelerometer, gyroscop, and magnetometer.

A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).

Arduino Library for the ADXL345

This is an Arduino library for SparkFun's Color LCD Shield

SparkFun Fork of Mike McCauley's RadioHead library (http://www.airspayce.com/mikem/arduino/RadioHead/)

No description or website provided.

Logic level converter bi-directional with Mosfets

Example code for use on the pcDuino

Example code and board files for the Si4703 FM Tuner Evaluation Board

phant logging utility library for arduino

A wall of addressable LEDs inspired by the Netflix series Stranger Things that displays messages from Twitter.

BOB-09056 at Sparkfun.com

Code for the Digital Handpan - A project using capacitive touch on the Teensy in conjunction with the Teensy Audio Shield.

Use this one library to talk to all the I2C devices on your SparkFun Photon Weather Shield

Arduino support for ICM_20948 w/ portable C backbone

The BNO080/BNO085 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.

A library to seamlessly control the SparkFun SerLCD over I2C, SPI, and Serial.

Design files and firmware files for the RedBot robotics board.

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders.

A library to drive the AMS CCS811 air quality sensor