This is an advance starter project for Angular 2 apps based on AngularClass's angular2-webpack-starter and Nathan Walker's angular2-seed-advanced.

I would like to thank both for their great work and collaboration. Please refer to both projects' pages for extra documentation.

Integration with:

ngrx/store RxJS powered state management, inspired by Redux
ngrx/effects Side effect model for @ngrx/store
ng2-translate for i18n
- Usage is optional but on by default
- Up to you and your team how you want to utilize it. It can be easily removed if not needed.
angulartics2 Vendor-agnostic analytics for Angular2 applications.
- Out of box support for Google Analytics
  - When using the seed, be sure to change your write_key here
- Can be changed to any vendor, learn more here
lodash Helps reduce blocks of code down to single lines and enhances readability
(WIP) NativeScript cross platform mobile (w/ native UI) apps. Setup instructions here.
Electron cross platform desktop apps (Mac, Windows and Linux). Setup instructions here.


The zen of multiple platforms. Chrome, Android and iPhone all running the same code.


Programming Nirvana. Mac and Windows desktop both running the same code.

Enhanced development workflow
Enhanced testing support options
Getting Started
Electron App
Framework How-Tos
Web Configuration Options
Change Detection OnPush Note
General Best Practice Guide to Sharing Code
How best to use for your project
Configuration
More Documentation
Contributing
Known Bugs
License

Enhanced development workflow

Decorators for components which reduce boilerplate for common component setups
Shared code can be found in frameworks:
- app: your shared application architecture code
- core: foundation layer (decorators and low-level services)
- analytics: analytics provided by Google Analytics
  - Only reports data in production build
- i18n: internationalization features
- electron: Electron specific code
- sample: Just a sample module providing some components and services
- test: test specific code providing conveniences to make testing your code easier and faster

Enhanced testing support options

mocks for various services
configurable provider blocks for easy test setup of common application providers
- tired of setting up similar providers over and over again for different tests?
- configure a reusable test provider which can be configured on a case-by-base basis
- see example here
helpers for end-to-end (e2e, integration) tests
convenient shorthand to reduce test setup boilerplate and enhance speed of writing tests
- are your test cases buried by multiple import lines requiring you to scroll just to get to the substance of the test?
- removes noise allowing you to better focus on the substance of the test
- provides full intellisense support
- allows your team to add unique shorthands for various testing scenarios specific to your application needs
- plays nice with tslint options like "no-unused-variable": true as the api hangs off a plain Object instead of globals
  - what's the value of that you ask? have you ever isolated a test with iit or ddescribe but didn't import those or vice versa, used iit leaving an unused it now in your tests? yeah, tslint will be all over you :/
  - avoids unused variable warnings altogether in tests since you are always using a valid key from the shorthand Object
- see example here

Advice: If your project is intended to target a single platform (i.e, web only), then angular2-webpack-starter is likely more than suitable for your needs. However if your project goals are to target multiple platforms (web, native mobile and native desktop), with powerful out of the box library support and highly configurable/flexible testing options, then you might want to keep reading.

Additionally, this seed is intended to push a couple boundaries so if you see dependencies that are bleeding edge, this is intentional.

Getting Started

Dependencies

node v5.x.x or higher and npm 3 or higher.
To run the NativeScript app:

npm install -g nativescript

Usage

git clone --depth 1 https://github.com/JonnyBGod/angular2-webpack-advance-starter.git
cd angular2-seed-advanced

# install the project's dependencies
npm install or yarn install

# start the server
npm start

# use Hot Module Replacement
npm run start:hmr

Other commands

build files

# development
npm run build:dev
# production (jit)
npm run build:prod
# AoT
npm run build:aot

hot module replacement

npm run server:dev:hmr

watch and build files

npm run watch

run unit tests

npm run test

watch and run our tests

npm run watch:test

run end-to-end tests

# this will start a test server and launch Protractor
npm run e2e

continuous integration (run unit tests and e2e tests together)

# this will test both your JIT and AoT builds
npm run ci

run webdriver (for end-to-end)

npm run webdriver:update
npm run webdriver:start

run Protractor's elementExplorer (for end-to-end)

npm run webdriver:start
# in another terminal
npm run e2e:live

generate docs

npm run docs

build Docker

npm run build:docker

Electron App

Develop

Mac:      npm run start:desktop
Windows:  npm run start:desktop:windows

Build: Electron App for Mac, Windows or Linux for distribution

Mac:      npm run build:desktop:mac
Windows:  npm run build:desktop:windows
Linux:    npm run build:desktop:linux

All:      npm run build:desktop

Framework How-Tos

i18n

how to add a language?
- src/assets/i18n/
  - add [language code].json (copy existing one and adapt the translation strings)
- src/client/app.config.json
  - add language to availableLanguages
- src/app/frameworks/i18n/components/lang-switcher.component.spec.ts
  - fix test

Change Detection OnPush Note

Please Note: The seed uses Angular's ChangeDetectionStrategy.OnPush by default which requires some understanding of immutability and one-way data flows. Please check out the following resources to learn more:

If you experience issues with changes not occuring in your views, you can disable this by commenting out these lines. The seed uses OnPush by default because it provides optimal performance and if you decide to turn it off while developing your application, you can always turn it back on when you're ready to refactor your data services to utilize OnPush properly.

General Best Practice Guide to Sharing Code

There’s actually only a few things to keep in mind when sharing code between web/mobile. The seed does take care of quite a few of those things but here’s a brief list:

Don’t import {N} modules into your components/services. {N} modules can only be used inside the {N} app therefore cannot be shared. To get around this, use OpaqueTokens which is a fancy name for something quite simple. Learn more here. A great example of how to integrate 2 different plugins (1 for web, 1 for {N}) and share all the code exists in this wiki article: How to integrate Firebase across all platforms written by the awesome Scott Lowe.
Use the conditional hooks provided by the seed in shared methods where you may need to handle something differently in {N} than you do on the web. For example, see here.
Don’t use window global. Inject the WindowService provided by the seed instead. This includes usage of alert, confirm, etc. For example:

If you were thinking about doing: alert('Something happened!');, Don't. Instead inject WindowService:

constructor(private win: WindowService) {}

public userAction() {
  if (success) {
    // do stuff
  } else {
    this.win.alert('Something happened!');
  }
}

This ensures that when the same code is run in the {N} app, the native dialogs module will be used.

Lastly, understand this video: http://www.nativescriptsnacks.com/videos/2016/06/13/zoned-callbacks.html … As far as dealing with {N} and 3rd party plugins, you want to understand that.

The advice Nathan Walker's likes to give, and I fully support it, is:

Code with web mentality first. Then provide the native capability using Angular’s {provide: SomeWebService, useClass: SomeNativeService } during bootstrap.

There are some cases where you may want to use useValue vs. useClass, and other times may need to use useFactory. Read the Angular docs here to learn more about which you may need for your use case.

How best to use for your project

Setup

NOTE: This should be done first before you start making any changes and building out your project. Not doing so will likely result in dificulty when trying to merge in upstream changes later.

Download a zip of the seed. (Do not fork)
npm run git.setup - This will initialize git as well as setup upstream properly.
git remote add origin ...your private repo...
npm run git.prepare - This will prepare git to handle the merge
npm run git.merge - This will fetch upstream and run the first merge (*Important)

IMPORTANT: You will see a wall of Conflicts after doing above (a Conflict for every single file). This is normal. There actually will not be any problematic conflicts as it's just reporting every single file which both sides (upstream and your first commit) added.

git add .; git commit -m'ready'. Yes, you will be committing all those conflicts, which actually are not a problem in this 1 time case.
Now you have git setup and ready to develop your application as well as merge in upstream changes in the future.
npm install (and all other usage docs in this README apply)
Create a new framework for your application in src/app/frameworks to build your codebase out. Say your app is called AwesomeApp, then create awesomeapp and start building out all your components and services in there. Create other frameworks as you see fit to organize.
If you don't want an integration that comes out of box with this seed; for example. let's say you don't want to use i18n. Then just delete the i18n, remove ng2-translate as dependency root package.json and nativescript/package.json. Then remove any references to i18n throughout.

Merging latest upstream changes

npm run git:merge:preview - This will fetch upstream and show you how the merge would look
npm run git:merge - This will actually do the merge
Handle any conflicts to get latest upstream into your application.
Continue building your app.

You can read more about syncing a fork here.

If you have any suggestions to this workflow, please post here.

Configuration

Configuration files live in config/ we are currently using webpack, karma, and protractor for different stages of your application.

Use config/custom/ configuration files when possible to add your custom configurations or override our configurations. This will help you when updating upstream.

AoT Don'ts

The following are some things that will make AoT compile fail.

Don’t use require statements for your templates or styles, use styleUrls and templateUrls, the angular2-template-loader plugin will change it to require at build time.
Don’t use default exports.
Don’t use form.controls.controlName, use form.get(‘controlName’)
Don’t use control.errors?.someError, use control.hasError(‘someError’)
Don’t use functions in your providers, routes or declarations, export a function and then reference that function name
Inputs, Outputs, View or Content Child(ren), Hostbindings, and any field you use from the template or annotate for Angular should be public

Contributing

Please see the CONTRIBUTING and CODE_OF_CONDUCT files for guidelines.

License

MIT

Cheap and reliable Node.js hosting starts at $3/month, and $1/month static HTML hosting

JonnyBGod / angular2-webpack-advance-starter

Programming Languages

Labels

Projects that are alternatives of or similar to angular2-webpack-advance-starter