Pirate

What is Pirate?

Pirate is a gateway, written in go, which accepts client-side metrics via UDP and makes them available to grafsy. In the end you can have near-time dashboards with client-side metrics.

Architecture

• UDP packets are accepted by the UDP server
• if compression is enabled, the packets are decompressed for the next step
• plain text messages are parsed into header attributes and the metrics body (see protocol)
• parsed messages are validated, invalid messages or metrics will be dropped (see validation)
• valid metric names are then resolved to their Graphite path
• at the end the writer will take care of sending the metrics to Grafsy via TCP or filesystem
• beside this there is a monitoring component, which tracks own metrics like udp_received, metrics_received or metrics_dropped, which are also sent to the writer

All the components of the data pipeline are implemented as workers (goroutines), which scale with the amount of CPUs. Additionally there are buffers (go channels) between those components. This means, even if some messages are processed a bit slower, the rest of the system should not be affected.

In the rare case that all buffers should be full, incoming UDP packets will be dropped immediately.

Protocol

The client's message is a (GZIP-encoded) UDP packet, which consist of two parts: the header and the body.

The header is the first line of the message and contains information about the whole message (e.g. the project identifier and custom attributes). The body contains the metrics, where each metric consists of a name, a numeric value and a timestamp.

Example

In plain text (before GZIP-compression is applied) the message could look like this:

project=awesome_game; version=1.3.37;
fps 55 1234567890
fps 48 1234567900
memory_usage 209715200 1234567890
fps 53 1234567950
memory_usage 205215400 1234568320

Here are two attributes defined by the header. The project is always required, because it determines, which rules are applied to the metrics. The version attribute is a custom attribute, which can be used in the graphite_path configuration via {attr.version}. Additional attributes, which are not used in the graphite_path will be ignored.

In total there are 5 metrics, which will be processed according to the configuration of the awesome_game project.

Output Format

According to the project rules the metric name will be resolved to a graphite path (see placeholders for more information). The resulting rows could then look like this:

games.awesome_game.client.ios.1_3_37.fps 55 1234567890
games.awesome_game.client.ios.1_3_37.fps 48 1234567900
games.awesome_game.client.ios.1_3_37.memory_usage 209715200 1234567890
games.awesome_game.client.ios.1_3_37.fps 53 1234567950
games.awesome_game.client.ios.1_3_37.memory_usage 205215400 1234568320

Validation

The incoming packages and the single metrics are validated. This includes:

• the project identifier from the header must be configured, otherwise the message is dropped
• all values of custom header fields must match their configured regex, otherwise the message is dropped
• sent metric names must be configured, otherwise the metric is dropped
• metric values must be within the configured min/max range to be valid, otherwise the metric is dropped
• timestamp validation: metrics with future timestamps or too old timestamps (> 1h) get dropped

All metrics which passed this validation will be processed and sent to Grafsy

Configuration

General

Projects

Every project has its own custom sub-section within the configuration file under the key projects.PROJECT_ID, where PROJECT_ID is your own identifier, which is used from the message header to determine the target project

The projects sub-section then has the following keys:

Attributes

Every project may have custom attribute definitions under the key projects.PROJECT_ID.attributes.ATTRIBUTE_ID, where ATTRIBUTE_ID is your own identifier, which is used from the message header (analogous to the project attribute).

The value of every attribute is just a regular expression, which is tested on incoming message headers. If at least one of the attribute's expressions does not match, the whole message will be dropped.

Metrics

Every project may have one or more metric definitions under the key projects.PROJECT_ID.metrics.METRIC_ID, where METRIC_ID is your own metric identifier, which equals the metric name from the message body.

This definition includes a min and max value, which are used for boundary validation. Metrics, which are out of the configured boundary, will be dropped. Optionally the Graphite Path of the project can be overridden for single metrics.

The metrics sub-section supports the following options:

Placeholders

Within your graphite_path configuration you can use two types of placeholders: attributes (attr) and metrics (metric). The first one relates to attributes, which are sent with the message header and contain the project ID and arbitrary data. The metric variable relates to the metric itself and currently only allows access to the metric sub-key name

Example:

projects:
  example_project:
    graphite_path: games.awesome_game.client.{attr.platform}.{attr.version}.{metric.name}

Sending the following message

project=example_project; platform=ios; version=1.3.37;
fps 55 1234567890

would result in the path games.awesome_game.client.ios.1_3_37.fps

Notice: during the placeholder resolution all dots are substituted by underscores in order to not influence your graphite path hierarchy

If one of the attributes is missing, the metrics won't be processed any further

Full Config Example

udp_address: 0.0.0.0:33333
graphite_target: tcp://127.0.0.1:3002
monitoring_enabled: true
monitoring_path: games.awesome_game.pirate.{metric.name}
gzip: true
log_level: debug # debug mode is very verbose and should only be used for - well - debugging purpose :)
per_ip_ratelimit:
  amount: 20
  interval: 1m
projects:
  awesome_client:
    graphite_path: AVG.games.awesome_game.client.{attr.platform}.{attr.version}.{metric.name}
    attributes:
      platform: ^(ios|android)$
      version: ^[0-9]+\.[0-9]+$
    metrics:
      frames_per_second:
        min: 0
        max: 60
      memory_usage:
        min: 0
        max: 2147483648
      startup_time:
        min: 0
        max: 90
      errors:
        graphite_path: SUM.games.awesome_game.client.{attr.platform}.{attr.version}.{metric.name}
        min: 0
        max: 1000
  awesome_backend:
    graphite_path: servers.some_project.{attr.hostname}.{metric.name}
    attributes:
      hostname: ^[0-9a-f]{12}$
    metrics:
      requests_per_second:
        min: 0
        max: 100000
      response_time:
        min: 0
        max: 100