Swift Development Environment

SDE adds Swift code completion and hover help to Visual Studio Code on macOS and Linux.

Fork Notice: This is the new home of SDE initially been developed by @jinmingjian. It is now maintained by @vknabel. jinmingjian/sde is no longer maintained and does only support Swift 3. This fork supports Swift 3.1, 4 and 5.

Installation

You have the choice between three different language server implementations.

sourcekit-lsp is easier to install and will be updated more frequently. On the other hand sourcekite treats standalone files, Xcode projects and SwiftPM modules differently and is more configurable. If you can't decide, you can install both and swap out the used LSP by setting sde.languageServerMode to sourcekite, sourcekit-lsp or langserver.

Using sourcekit-lsp

Note: on macOS SDE defaults to using your Xcode's Swift and sourcekit-lsp. In that case, SDE should work out of the box!

1. Install SDE.
2. Recent versions of Xcode ship with sourcekit-lsp, you can check its path running xcrun -f sourcekit-lsp. If not found, please install sourcekit-lsp.
3. Set "sourcekit-lsp.serverPath": "absolute path to the sourcekit-lsp executable" and "sde.languageServerMode": "sourcekit-lsp".

Using sourcekite

1. sourcekite does only work with SDE. Make sure you have it installed.

2. Install the companion project sourcekite.

   $ git clone https://github.com/vknabel/sourcekite
   $ cd sourcekite
   
   # For Linux
   # Ensure you have libcurl4-openssl-dev installed (not pre-installed)
   # $ apt-get update && apt-get install libcurl4-openssl-dev
   # Ensure LD_LIBRARY_PATH contains /your/swift/usr/lib
   # And have $ sudo ln -s /your/swift/usr/lib/libsourcekitdInProc.so /usr/lib/libsourcekitdInProc.so
   $ make install PREFIX=/usr/local
   
   # For macOS
   $ make install PREFIX=/usr/local
   

3. Add the absolute path to your compiled sourcekite binary swift.path.sourcekite to your vscode settings as /usr/local/sourcekite.

If you experience any problems during installation, file an issue. All kind of feedback helps especially when trying to automate this.

Using Langserver Swift

Besides sourcekit-lsp and sourcekite SDE allows you to use RLovelett/langserver-swift.

If you prefer using an alternative language server, set set sde.languageServerMode to langserver and let swift.languageServerPath point to your installed language server.

Though in most cases sourcekit-lsp and sourcekite should produce better results and performance.

Configuration

| Config | Type | Default | Description | | ---------------------------------- | ---------- | --------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------- | | sourcekit-lsp.serverPath | string | | The path of the sourcekit-lsp executable. In SDE: defaults to the toolchain's sourcekit-lsp. | | sourcekit-lsp.toolchainPath | string | | The path of the swift toolchain. In SDE: defaults to Xcode's default toolchain. | | swift.languageServerPath | string | /usr/local/bin/langserver-swift | [DEPRECATED] The fully qualified path to the Swift Language Server executable. | | swift.path.sourcekite | string | | The fully path to the sourcekite(SDE's LS backend). | | swift.path.swift_driver_bin | string | /usr/bin/swift | The fully path to the swift driver binary. | | swift.path.shell | string | /bin/sh | The fully path to the shell binary. | | sde.sourcekit.compilerOptions | string[] | [] | Optional compiler options like the target or search paths. Will only be used as default. (debug | release).yaml builds will override these settings. | | swift.targets | object[] | [] | If SDE cannot reliably detect all targets, you can manually configure them. | | sde.enable | boolean | true | Enable SDE functionality | | sde.languageServerMode | string | sourcekite | Decides which language server should be used. sourcekite is the default LSP for SDE, sourcekit-lsp is Apple's official one and langserver is RLovelett's Langserver. | | sde.enableTracing.client | boolean | false | Enable tracing output for SDE client | | sde.enableTracing.LSPServer | boolean | false | Enable tracing output for SDE LS server | | sde.buildOnSave | boolean | true | Indicates wether SDE shall build the project on save. | | sde.swiftBuildingParams | string[] | ["build"] | The params that shall be passed to the swift command. | | swift.diagnosis.max_num_problems | number | 100 | Controls the maximum number of problems produced by the server. NOET: Not used now. |

Commands

Contributors

• Valentin Knabel, @vknabel, twitter, maintainer
• Clay Jensen-Reimann, @clayreimann, twitter
• Jin Mingjian, @JinMingjian, twitter, author, not involved anymore
• Felix Fischer, @felix91gr, twitter
• Mijo Gračanin, @mijo-gracanin

FAQ

How to contribute to this project?

There are a lot of ways you could contribute to either this project or the Swift on VS Code itself. For more information head over to CONTRIBUTING.md.

How can I debug my SwiftPM project?

Debugging your Swift targets requires a different extension LLDB Debugger. You can follow this tutorial: vknabel.com/pages/Debugging-Swift-in-VS-Code.

How do I get autocompletion when using TensorFlow?

You can add the following configs. This will improve your autocompletion. Though currently the TensorFlow module will not be indexed yet.

// .vscode/settings.json example for TensorFlow
{
  "sde.swiftBuildingParams": ["build", "-Xlinker", "-ltensorflow"],
  "sde.languageServerMode": "sourcekite",
  "sourcekit-lsp.toolchainPath": "/Library/Developer/Toolchains/swift-tensorflow-RELEASE-0.3.1.xctoolchain",
  "swift.path.swift_driver_bin": "/Library/Developer/Toolchains/swift-tensorflow-RELEASE-0.3.1.xctoolchain/usr/bin/swift"
}

In case you find a way to get autocompletion for the TensorFlow module to work, please submit a PR or open an issue.

How do I get autocompletion for UIKit?

With sourcekite, you can add new autocompletion targets through your configuration.

// .vscode/settings.json example for iOS and WatchOS
{
  "swift.targets": [
    {
      "name": "YourApp",
      "path": "YourApp/YourApp",
      "sources": ["**/*.swift"],
      "compilerArguments": [
        "-sdk",
        "/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS.sdk",
        "-target",
        "arm64-apple-ios11.0"
      ]
    },
    {
      "name": "YourWatchApp",
      "path": "YourApp/YourWatchExtension",
      "sources": ["**/*.swift"],
      "compilerArguments": [
        "-sdk",
        "/Applications/Xcode.app/Contents/Developer/Platforms/WatchOS.platform/Developer/SDKs/WatchOS.sdk",
        "-target",
        "armv7k-apple-watchos4.0"
      ]
    }
  ]
}

Since Xcode 11.4, you may use its built-in support for sourcekit-lsp

// .vscode/settings.json example for iOS
{
  "sde.languageServerMode": "sourcekit-lsp",
  "sourcekit-lsp.serverPath": "/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/sourcekit-lsp",
  "sourcekit-lsp.toolchainPath": "/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain",
  "sde.swiftBuildingParams": [
    "build",
    "-Xswiftc",
    "-sdk",
    "-Xswiftc",
    "/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS.sdk",
    "-Xswiftc",
    "-target",
    "-Xswiftc",
    "arm64-apple-ios11.0"
  ]
}

// .vscode/settings.json example for WatchOS
{
  "sde.languageServerMode": "sourcekit-lsp",
  "sourcekit-lsp.serverPath": "/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/sourcekit-lsp",
  "sourcekit-lsp.toolchainPath": "/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain",
  "sde.swiftBuildingParams": [
    "build",
    "-Xswiftc",
    "-sdk",
    "-Xswiftc",
    "/Applications/Xcode.app/Contents/Developer/Platforms/WatchOS.platform/Developer/SDKs/WatchOS.sdk",
    "-Xswiftc",
    "-target",
    "-Xswiftc",
    "armv7k-apple-watchos4.0"
  ]
}

Build failed! What should I do?

Go to vscode OUTPUT window, then select SPM. The OUTPUT window will tell you what's wrong.

I'd like to have a different build paths than usually. How can I achieve that?

You can compile your app using a command like swift build --build-path "./.build-macos" on macOS and swift build --build-path "./.build-linux" on Linux, e.g. from within a docker container, you just need to add the appropriate building parameter:

// .vscode/settings.json
{
  "sde.swiftBuildingParams": [
    "build",
    "--build-path",
    "./.build-macos"
  ]
}

Other questions?

If so, file an issue, please :)

License

Apache License v2.

3rd-party Sources Thanks

1. dbgmits, very nice structure of sources, but of which in my heavy modification to support non-MI and much more